cs.RONov 17, 2026

Low-speed Limit Cycle Walking of Planar X-shaped Bipedal Robot with Special Properties

Authors: Fumihiko Asano, Cong Yan

Organizations: Graduate School of Advanced Science and Technology, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan · Department of Mechanical Engineering, Ritsumeikan University, 1-1-1 Nojihigashi, Kusatsu Shiga 525-8577, Japan

Abstract

This paper proposes a novel planar semicircular-footed X-shaped bipedal robot in which the center of mass of each leg link is at the same position as the hip joint, and discusses a method for generating a stable limit cycle gait on level ground. First, we outline the assumptions of the robot model with four degrees of freedom, and develop the mathematical equations of motion and collision. Second, we set the relative hip-joint angle as a control output and design a control system to follow it to the desired trajectory specified as a fifth-order function of time. Third, we mathematically show that there are special properties: the angular velocity of the swing leg does not change before and after the collision, and the time-integral of the control input becomes zero in a steady gait. We also mathematically show that the model has the feature that approximate linearization is effective and the antigravity effect of semicircular feet can be utilized. Through numerical simulations, we verify the validity of the theoretical results, and analyze some fundamental gait properties such as convergence speed and mechanical energy restoration.

Figures & tables

Explore similar work

Apr 14, 2026

Asymptotically Stable Gait Generation and Instantaneous Walkability Determination for Planar Almost Linear Biped with Knees

A class of planar bipedal robots with unique mechanical properties has been proposed, where all links are balanced around the hip joint, preventing natural swinging motion due to gravity. A common property of their equations of motion is that the inertia matrix is a constant matrix, there are no nonlinear velocity terms, and the gravity term contains simple nonlinear terms. By performing a Taylor expansion of the gravity term and making a linear approximation, it is easy to derive a linearized model, and calculations for future states or walkability determination can be performed instantaneously without the need for numerical integration. This paper extends the method to a planar biped robot model with knees. First, we derive the equations of motion, constraint conditions, and inelastic collisions for a planar 6-DOF biped robot, design its control system, and numerically generate a stable bipedal gait on a horizontal plane. Next, we reduce the equations of motion to a 3-DOF model, and derive a linearized model by approximating the gravity term as linear around the expansion point for the thigh frame angle. Through numerical simulations, we demonstrate that calculations for future states and walkability determination can be completed in negligible time. By applying control inputs to the obtained model, performing state-space realization, and then discretizing it, instantaneous walkability determination through iterative calculation becomes possible. Through detailed gait analysis, we discuss how the knee joint flexion angle and the expansion point affect the accuracy of the linear approximation, and the issues that arise when descending a small step.
Nov 16, 2026

Stability Principle Inherent in Wheel Gait of Planar X-shaped Walker Generated Using Constant Torque Drive and Mechanical Stoppers

Since the late 19th century when the first walking toys were developed, it has been known that mechanical stoppers at the hip joint are crucial for generating stable passive dynamic walking. Recent research on passive-dynamic and limit-cycle walkers has also confirmed that mechanical stoppers at the hip and knee joints are effective for generating stable walking motion, but theoretical research on how this mechanical constraint enhances the overall gait stability remains insufficient. This paper introduces a planar X-shaped walker equipped with mechanical stoppers at the hip joint, and investigates the effect of the mechanical constraint on the stability of the wheel gait generated by constant torque drive on a downslope. By simply falling forward while using the stoppers to constrain itself to the target impact posture, the robot can generate a highly stable wheel gait. We divide the motion of one step into four phases, derive approximate analytical solutions for the state error transition function matrix in each phase using a linearized model, and analyze the increase or decrease in the state error norm using metrics such as its maximum singular value. Numerical simulations demonstrate that while two phases are unstable in terms of the increase in the state error norm, the remaining two phases are stable, resulting in overall asymptotic stability.
Sep 17, 2026

Walking on the Slope: Stable Bipedal Gaits with Genetic-Algorithm-Optimized Trajectories

This paper presents the kinematic and dynamic modeling, trajectory generation, and stability analysis of an 8-degree-of-freedom (DOF) biped robot walking on flat and inclined terrain. Denavit-Hartenberg (DH) parameters and homogeneous transformations are used to derive the forward kinematics, while closed-form inverse kinematics maps the desired hip and swing-foot Cartesian trajectories, generated with cubic splines, to joint angles. Joint torques are computed using the Newton-Euler iterative algorithm, and dynamic stability is evaluated using the zero moment point (ZMP) criterion. A genetic algorithm (GA) optimizes the hip height, maximum swing-foot lift, and frontal-plane tilt angle by minimizing the work done by the joints subject to a ZMP feasibility penalty. Simulation results in MATLAB show that the nominal 8-DOF model remains ZMP-stable for step completion times down to 0.5 s and for slope inclinations up to 22.5 degrees with the given foot geometry. Beyond these limits, the ZMP leaves the support polygon, and either the foot dimensions or the trajectory parameters must be modified. The results also show that ZMP stability is governed by the mass distribution among the links rather than the total mass of the robot.