cs.CVNov 17, 2026

Wall-to-wall maps of canopy height and aboveground carbon across the Atlantic Forest

Authors: Matheus Pinheiro Ferreira, Thiago Carmuega Rabaçal, Giulio Brossi Santoro, Giovanna de Andrade Ferreira, Rodrigo Costa Pinto, Danilo R. A. de Almeida, Paulo Guilherme Molin, Catherine Torres de Almeida, 

Organizations: Department of Forest Sciences, “Luiz de Queiroz” College of Agriculture, University of São Paulo (USP/ESALQ), Piracicaba, SP, Brazil · Bioflore Technology, Brazil · Center for Carbon Research in Tropical Agriculture (CCARBON), University of São Paulo (USP), Piracicaba-SP, Brazil · Instituto Geográfico e Cartográfico de São Paulo (IGC), São Paulo, SP, Brazil · 

Abstract

Global canopy height maps are increasingly used to estimate forest carbon, yet their regional accuracy is rarely tested. We present wall-to-wall maps of canopy height (10 m) and aboveground carbon density (30 m) for the Brazilian Atlantic Forest in 2024. Height was predicted by a deep learning network fusing Sentinel-2 reflectance, Sentinel-1 and ALOS PALSAR backscatter and ALOS elevation, trained on 7,179 and tested on 1,793 patches (58,800 km2^2) from a statewide airborne LiDAR campaign over São Paulo state, Brazil. On held-out test patches, the mean absolute error is 2.26 m at 10 m and 1.90 m at 30 m, and the model was validated at two LiDAR sites outside São Paulo. Over the same pixels, the Meta and World Resources Institute global product has more than twice this error. A power law fitted to 124 inventory plots converted canopy height to above ground carbon density. The remaining forest holds 1,944 TgC over 28.3 Mha. Global products therefore need local validation before use in carbon accounting.

Figures & tables

Explore similar work

Mar 6, 2026

CHMv2: Improvements in Global Canopy Height Mapping using DINOv3

Accurate canopy height information is essential for quantifying forest carbon, monitoring restoration and degradation, and assessing habitat structure, yet high-fidelity measurements from airborne laser scanning (ALS) remain unevenly available globally. Here we present CHMv2, a global, meter-resolution canopy height map derived from high-resolution optical satellite imagery using a depth-estimation model built on DINOv3 and trained against ALS canopy height models. Compared to existing products, CHMv2 substantially improves accuracy, reduces bias in tall forests, and better preserves fine-scale structure such as canopy edges and gaps. These gains are enabled by a large expansion of geographically diverse training data, automated data curation and registration, and a loss formulation and data sampling strategy tailored to canopy height distributions. We validate CHMv2 against independent ALS test sets and against tens of millions of GEDI and ICESat-2 observations, demonstrating consistent performance across major forest biomes.
Oct 31, 2025

Estimation of aboveground biomass in a tropical dry forest: An intercomparison of airborne, unmanned, and space laser scanning

Accurate aboveground biomass (AGB) estimates are needed to report forest carbon under the Paris Agreement, yet tropical dry forests (TDFs) remain among the least studied tropical ecosystems. We present a plot-level intercomparison of airborne (ALS), unmanned (ULS) and simulated spaceborne full-waveform (SLS, GEDI simulator) laser scanning for AGB estimation in ten permanent plots of Santa Rosa National Park, Costa Rica, covering early to late succession. Reference AGB (22-220 Mg/ha) was computed from the 2021 census with a documented procedure that screens diameter time series and propagates measurement, wood-density and allometric errors (plot uncertainty 3.5-14.5%). We compared ordinary least squares (OLS), a log-log model of mean canopy height fixed a priori and a single-metric model selected from the data, with support vector machine regression (SVM). Predictor selection, scaling and hyper-parameter tuning were nested within leave-one-plot-out validation. ALS gave the lowest errors: the a priori OLS model reached an RMSE of 32.3 Mg/ha (29%, R2_LOO = 0.77) and SVM 35.8 Mg/ha (32%). SVM did not improve on OLS for any platform and was significantly worse with ULS (p = 0.01). The best ULS and SLS models reached 33% and 37%; differences between platforms were not significant with ten plots. Selecting predictors on all plots before cross-validation lowered the apparent SVM error by up to 23 percentage points, and footprint coordinates, ALS point density and terrain elevation from the GEDI simulator produced spurious skill; these effects explain the higher accuracies reported in an earlier version of this work. Model errors remained at least 2.5 times larger than the field-AGB uncertainty. With small plot networks, a height-based OLS model with ALS is the most robust choice, and more and larger plots are needed before nonlinear models can be shown to add value in TDFs.
Feb 24, 2026

ECHOSAT: Estimating Canopy Height Over Space And Time

Forest monitoring is critical for climate change mitigation. However, existing global tree height maps provide only static snapshots and do not capture temporal forest dynamics, which are essential for accurate carbon accounting. We introduce ECHOSAT, a global and temporally consistent tree height map at 10 m resolution spanning multiple years. To this end, we resort to multi-sensor satellite data to train a specialized vision transformer model, which performs pixel-level temporal regression. A self-supervised growth loss regularizes the predictions to follow growth curves that are in line with natural tree development, including gradual height increases over time, but also abrupt declines due to forest loss events such as fires. Our experimental evaluation shows that our model improves state-of-the-art accuracies in the context of single-year predictions. We also provide the first global-scale height map that accurately quantifies tree growth and disturbances over time. We expect ECHOSAT to advance global efforts in carbon monitoring and disturbance assessment. The maps can be accessed at https://github.com/ai4forest/echosat.