cs.LGNov 19, 2026

Predicting Surface Displacement Fields of Laser Powder Bed Fusion Parts Using STL-Derived Graphs and Part-Level Descriptors

Authors: Saima Ahmed Suhi, Lang Yuan, Md Habibor Rahman

Organizations: Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA

Abstract

Predicting part distortion before fabrication remains challenging in laser powder bed fusion (LPBF), while thermomechanical simulation is computationally expensive for repeated design evaluations. This study presents a two-branch graph attention network (GAT) to predict three-dimensional surface displacement directly from STL-derived graphs. The first branch learns geometric relationships among connected vertices of a densified STL surface mesh, while the second incorporates 12 part-level descriptors of mass distribution, build-plate contact, overhang, size, and shape. Displacement labels from ANSYS Additive Print simulations are mapped onto STL vertices using Gaussian-kernel weighted averaging. Evaluated on 117 parts using five-fold cross-validation split by part, the model achieves an R^2 of 0.946 and a mean absolute error of 0.0178 mm for displacement magnitude. Relative to a node-wise multilayer perceptron, GAT improves R^2 from 0.913 to 0.946; for build-direction displacement, R^2 increases from 0.903 to 0.939. GAT also outperforms GraphSAGE (R^2 = 0.936) and a graph convolutional network (R^2 = 0.934) across all five folds. Ablation experiments show that removing mass-distribution descriptors reduces magnitude R^2 to 0.900, while removing build-plate contact and overhang descriptors reduces it to 0.920. These results demonstrate the value of combining local mesh connectivity with global geometric descriptors to predict LPBF distortion, enabling faster design iteration and earlier identification of distortion-prone geometries.

Figures & tables

Explore similar work

Nov 3, 2026

AgentAM: An AI Agent for Spatter- and Defect-Aware Process Optimization in Laser Powder Bed Fusion

Predictive models for laser powder bed fusion (LPBF) are rarely used on the shop floor because querying them requires programming and model-specific knowledge. We present AgentAM, a large language model (LLM) agent that gives process engineers natural-language access to CFD-trained surrogates of spatter and melt pool geometry for SS316L through the Model Context Protocol (MCP). Polynomial surrogates trained on 279 single-track simulations predict melt pool dimensions (R2≥0.95R^2 \geq 0.95) and spatter volume (R2=0.83R^2 = 0.83 on test data) at any power-velocity point in the trained range, and geometric criteria assign each point a geometry-derived defect regime (keyhole, lack of fusion, balling or stable) that matches the regime obtained from the simulated geometry in 93.4% of tracks under cross-validation. The agent selects and parameterizes tools for prediction, process-window scans and constrained optimization. Minimum-spatter optima often sat within 10 μμm of the lack-of-fusion boundary; a margin-aware optimizer moved them away from all thresholds and raised the estimated probability of remaining classified Good from 0.94 to 1.00 under an assumed 2% process drift, and from 0.72 to 0.91 when jointly sampled cross-validated geometry residuals were added. About 40-50 well-spread simulations sufficed to reproduce the defect map. To evaluate the agent layer, we introduce a 145-prompt benchmark scored against direct tool calls, plus eight prompts (40 runs) on margin-aware requests. Over the 725 runs of the main benchmark the agent passed the intended inputs in 98.5% of parsing prompts, reported the scored spatter values and defect classes faithfully and met every stated constraint in the 65 feasible optimization runs, within a median 1.0% of the brute-force optimum.
Apr 5, 2026

Towards Agentic Defect Reasoning: A Graph-Assisted Retrieval Framework for Laser Powder Bed Fusion

Laser Powder Bed Fusion (LPBF) is highly sensitive to process parameters, which influence defect formation through complex thermal and fluid mechanisms. However, defect-related knowledge is dispersed across the literature, limiting systematic understanding. This study presents a graph-assisted retrieval framework for defect reasoning in LPBF, using Ti6Al4V as a case study. Scientific publications are transformed into a structured representation, and relationships between parameters, mechanisms, and defects are encoded into an evidence-linked knowledge graph. The framework integrates semantic and graph-based retrieval, supported by a lightweight agent-based reasoning layer to construct interpretable defect pathways. Evaluation shows high retrieval accuracy (0.9667) and recall (0.9667), demonstrating effective identification of relevant defect related evidence. The framework enables transparent reasoning chains linking process parameters to defects. This work provides a scalable approach for converting unstructured literature into a query able and interpretable knowledge resource for additive manufacturing.
Nov 19, 2026

Physics-Informed Feature Representations and Pretrained Tabular Foundation Models for Generalizable Melt Pool Geometry Prediction

Developing generalizable, data-efficient machine learning (ML) models for advanced manufacturing remains challenging because experimental datasets are limited and process-property relationships vary across materials and operating conditions. In laser powder bed fusion (LPBF), melt pool width, depth, and melting mode (conduction, transition, or keyhole) govern process stability and defect formation. Conventional ML models typically use dimensional process parameters, which represent laser-material interactions only implicitly and may limit cross-material transfer. This study evaluates whether two physics-informed dimensionless features, normalized enthalpy and Peclet number, combining laser processing conditions with material thermophysical properties, improve melt pool prediction over raw process parameters. We systematically benchmark seven models: four classical ML methods (Gaussian process, support vector machine, random forest, and XGBoost) and three pretrained tabular foundation models (TabPFN, TabDPT, and TabICLv2). Experiments span 316L stainless steel, IN625, IN718, and combined-material datasets, covering regression of melt pool width and depth and classification of melting modes. Dimensionless features yield comparable or superior predictive performance in most settings, with the largest gains in cross-material depth prediction (R^2 = 0.96). Tabular foundation models generally achieve stronger classification performance than classical baselines, particularly for multi-material datasets. These findings indicate that combining physically meaningful dimensionless representations with pretrained tabular models can improve data-efficient melt pool modeling and support more transferable process-window identification in LPBF.