Diffusion Transformer

In diffusion transformers, low-rank branches can mitigate 4-bit weight--activation (W4A4) post-training quantization (PTQ) loss by decomposing each weight into a low-bit residual and a high-precision low-rank component. Existing low-rank PTQ approaches, however, either optimize low-rank compensation and residual quantization separately, often requiring higher ranks, or rely on second-order weight updates without explicitly modeling activation quantization error, which becomes particularly pronounced under 4-bit quantization. To address these limitations, we present \method{}, a unified framework modeling low-rank-assisted W4A4 PTQ as a coupled calibration problem and deriving optimization-based solvers from the joint objective. Eliminating the output-side low-rank factor yields a \emph{deflated Hessian} that discounts residual errors already captured by the low-rank component, while an activation-noise surrogate is incorporated to suppress activation quantization error. Across five diffusion backbones, rank-4 \method{} consistently outperforms rank-4 SVDQuant in PSNR and LPIPS. It further surpasses rank-32 SVDQuant on SANA-1.6B, FLUX.1-schnell, and FLUX.1-dev with an $8\times$ smaller rank and up to $6.25\times$ faster quantization. Furthermore, on the Qwen3-8B LLM, rank-4 \method{} improves MMLU accuracy from 61.50% to 68.17% over rank-32 SVDQuant. Overall, \method{} achieves better W4A4 performance with substantially lower rank and quantization cost.

Training-free sparse attention offers a practical acceleration solution to Diffusion Transformers (DiTs) via reducing computations without fine-tuning. It typically involves estimating the importance of query-key regions and deriving sparse masks to compute only the important candidates, which inevitably introduces approximation errors that may degrade generation quality. To better balance the efficiency-quality trade-off, we propose iCATS, integrating improved importance estimation and sparse mask construction with an efficient hardware execution strategy. Specifically, for importance estimation, unlike previous works that perform independent clustering over query and key tokens based on feature similarity to estimate attention scores, iCATS demonstrates that clustering based on query-key dot-product interactions is more accurate and further reformulates this objective as a simple quadratic form for low-cost computation. For sparse mask construction, instead of using a fixed top-p rule, we observe that tolerance to sparse approximation errors varies across denoising timesteps and therefore introduce an SNR-guided sparsity schedule to adjust sparsity dynamically, leading to higher accuracy. Finally, for hardware execution, we devise a tail-merging strategy to reduce padding overhead caused by irregular cluster sizes, improving GPU kernel utilization. Extensive experiments show that iCATS achieves $2.03\times$ acceleration with 31.017 dB PSNR on HunyuanVideo-T2V-13B and $1.55\times$ acceleration with 29.301 dB PSNR on Wan2.1-T2V-14B, delivering a state-of-the-art efficiency-quality trade-off.

Highly compressed video autoencoders offer an effective way to accelerate video diffusion models, as the Diffusion Transformer (DiT) operates on far fewer tokens. However, such autoencoders are challenging to train, since a higher compression ratio degrades reconstruction quality and recovering it requires more channels, which is known to slow the convergence of the DiT. The compressed latent also differs from the one the DiT was trained on, so the pretrained DiT must be either retrained from scratch or adapted at considerable cost. Compressing the autoencoder the DiT was trained with appears to preserve compatibility, yet optimizing it for reconstruction alone still shifts the latent away from the distribution the DiT has learned. To address this, we propose Generation-Aware Latent Compression for Efficient Video Generation (GRACE), a two-stage framework that compresses a pretrained video autoencoder while keeping it compatible with the pretrained DiT. Specifically, we keep a frozen base latent from the pretrained encoder and learn a residual latent for the information lost under stronger compression, while aligning the compressed latent with the pretrained latent in the feature space of the frozen DiT so that the autoencoder is optimized for generation. We then adapt the DiT with lightweight fine-tuning and asymmetric denoising, where the base is denoised ahead of the residual. GRACE reduces the token count of Wan2.1-I2V-14B by 8x and its latency by 11.1x at 480x832x81, while matching the generation quality of the pretrained pipeline before compression on VBench.

Text-to-image diffusion models fail predictably on compositional prompts: attributes bind to the wrong objects, spatial relations invert, and multi-object scenes lose count. Recent architectures already augment CLIP with a T5 encoder precisely because CLIP's contrastive embedding loses compositional structure, yet these failures persist. We argue the binding problem is therefore not one of missing information but of misaligned information: a text encoder preserves compositional structure, but in a representation space shaped by language modelling rather than vision, and the denoising objective does not directly reward aligning the two. We show this correspondence can be supplied as an explicit training signal, that the relevant cross-modal information is concentrated in a low-rank subspace of self-supervised visual features, and that supplying it can be folded into diffusion training as a single auxiliary loss. Our method, ORCA (Orthogonal Residual Compositional Alignment), aligns the latent of a diffusion transformer with a low-rank target derived from a frozen visual encoder, through a predictor whose orthogonal basis is parameterised by a learned residual between T5 and CLIP embeddings, which provides a prompt-dependent signal for selecting the visual readout subspace. We prove that the cross-modal information recoverable at a given rank is bounded by the spectral mass of the visual encoder's covariance in the top components. Across three diffusion-transformer backbones (DiT-B/2, DiT-L/2, U-ViT-L), ORCA improves FID and GenEval over both vanilla and REPA baselines at zero inference-time cost; on DiT-L/2 it reaches FID 16.65 and GenEval 0.291 at 200K steps, exceeding the strongest 400K baseline at half the training cost, with the largest gains concentrated on attribute binding, spatial relations, and multi-object prompts.

Pixel-space diffusion models avoid the lossy VAE of latent models, which suggests an advantage on downstream tasks where fine-grained detail matters. We test this claim along both routes to a pixel-space backbone. We pretrain Iris-3B, a 3B-parameter pixel-space text-to-image transformer, from scratch through a $256\to512\to1024$ curriculum, after first ablating the prediction target and representation alignment at $256^2$ to decide what to scale. We also convert a pretrained latent model, FLUX.2 Klein base 4B, to pixel space. We fine-tune both families for monocular depth estimation and for image restoration/super-resolution. We find no significant improvement from using a pixel-space generative prior. Fine-tuned for depth with one matched direct-regression recipe, Iris-3B is level with the latent FLUX.2 Klein and the converted pixel FLUX.2 Klein falls behind it, and on $4\times$ DIV2K restoration neither pixel model beats a latent FLUX.2 Klein fine-tune, the converted one trailing it slightly. We document the recipes, the failure modes and the remaining confounds behind this negative result. Nevertheless, Iris-3B shows that pixel-space pretraining with the pixel-transformer (PiT) head of PixelDiT scales to 3B parameters and to text-to-image quality competitive with latent models, matching Qwen-Image on OneIG under the official evaluators at $1024^2$. We release its weights and training code in the hope that they help pave the way for further work on pixel-space generation.

Diffusion Transformers (DiTs) have achieved strong performance in image and video generation, but the quadratic complexity of full attention makes high-resolution generation computationally expensive. Window attention offers an efficient alternative, yet existing methods face a practical trade-off: partitioned window attention typically achieves computational efficiency consistent with its theoretical complexity. However, isolated windows block cross-window interaction, often introducing visible grid-like artifacts in the generated results. Fine-grained sliding-window attention effectively restores interactions across neighboring windows and improves visual quality. However, its irregular computation patterns create a substantial gap between theoretical and practical speedups and require specialized kernels tailored to each hardware backend. To tackle these challenges, we propose BASA, a backend-agnostic sparse attention, which brings the best of both worlds: visual quality and practical acceleration. Specifically, BASA replaces visual self-attention with shifted local-window attention. By introducing a structured window-shifting scheme across DiT blocks, we allow tokens divided by window boundaries in one layer to communicate in the following layers, thereby achieving global information exchange and eliminating window-induced visual artifacts. Notably, our design introduces no additional irregular operators or customized kernels, making it readily deployable on existing attention backends and closing the gap between theoretical sparsity and practical acceleration. Experiments demonstrate that BASA achieves measured speedups exceeding 90% of the theoretical estimates on FLUX and delivers a 4.52$\times$ attention speedup on Wan while maintaining competitive generation quality. Codes are publicly available at: https://github.com/lama0110/BASA.

Multi-reference image generation requires preserving the appearance of multiple subjects while composing them into a coherent scene. However, existing diffusion transformers commonly encode references as dense visual token grids and jointly process them with global attention, making conditioning increasingly expensive as the number and resolution of references grow. We present RefRoute, a framework that addresses both reference representation cost and attention overhead through two complementary mechanisms. Compact residual conditioning combines low-resolution latent tokens with lightweight residual features extracted from full-resolution pixels, reducing reference token counts while retaining fine-grained appearance cues. Condition routing and attention routing align reference tokens with their assigned target regions and restrict cross-reference interactions, while allowing selective reference access beyond region boundaries for scene integration. We further introduce RefRoute-Data for training many-reference generation models and ManyRef100, a benchmark spanning human, object, and mixed compositions with 10-17 references. After many-reference fine-tuning, RefRoute achieves an overall Weighted-Ref-VIEScore of 36.06 on ManyRef100, compared with 8.88 for FLUX.2-Klein-9B. Separate inference-cost evaluations show substantially slower latency growth as the reference count increases: at 16 references, our 50-step and 4-step configurations achieve $18.3\times$ and $14.2\times$ speedups over their corresponding FLUX baselines, respectively. These results establish compact reference representations and spatially routed attention as an effective approach to scalable many-reference image generation.

Multimodal Diffusion Transformers (MM-DiTs) jointly process visual and textual representations throughout generation. These models repeatedly update the text tokens through multimodal attention, forming dynamic contextual tokens whose function is not well understood. In this work, we introduce a framework for reading this contextual space through natural-language interrogation. We train a lightweight bottleneck network that maps intermediate contextual tokens into the input space of a frozen Large Language Model (LLM), allowing the LLM to answer questions about the emerging image directly from these hidden representations. Our reader reveals that contextual tokens encode a rich, global representation of the emerging scene: generation-specific semantics, including attributes left underspecified by the prompt, are accessible surprisingly early in denoising, while increasingly fine-grained details become readable over time. Remarkably, this information remains decodable even when the MM-DiT receives an empty prompt, showing that contextual tokens accumulate substantial image-specific information from the evolving visual representation itself. We further find that generations with more readable contextual representations tend to receive higher human-preference scores. Building on these observations, we introduce Contextual Alignment, a training technique that explicitly reinforces the visual-semantic information encoded in the contextual tokens, improving generation quality and distributional coverage. Together, our results establish contextual tokens as both an interpretable view into the internal dynamics of MM-DiTs and an effective target for improving generative models.

Sparse attention is a primary approach to reducing the latency of diffusion transformers in long-sequence generation tasks, such as video and high-resolution 3D asset generation. However, existing methods can degrade generation quality and fidelity at high sparsity levels. Through controlled oracle comparisons, we trace this degradation to three sources: constraints imposed by token grouping, inaccurate interaction selection, and the attention contributions lost when tokens are discarded. Guided by this analysis, we propose Meta-Cached Sparse Attention (MC-Sparse), a training-free framework that selects individual key-value (KV) tokens while organizing similar queries into tile-aligned groups for efficient GPU execution. MC-Sparse caches metadata comprising query groups, KV indices selected using exact attention probabilities, and residuals between dense and sparse attention outputs, and reuses them across subsequent denoising steps. Across video and 3D generation models, MC-Sparse achieves higher fidelity to dense-attention outputs and larger denoising speedups than existing sparse-attention baselines, without visible quality degradation. Relative to dense attention, it delivers a $1.80\times$ denoising speedup on Minimax-H3-Base and a $2.32\times$ speedup on 3D asset generation, both with negligible quality loss.

Diffusion transformers (DiTs) achieve state-of-the-art image generation, but their sampling cost limits deployment. Quantizing both weights and activations to 4 bits reduces this cost, yet existing methods fall short in one of two ways. Calibration-based methods are tied to a specific checkpoint and prompt distribution, whereas data-free Hadamard rotation, effective for LLMs, loses quality on DiTs. We show that this loss has a structural cause. Adaptive layer-norm conditioning adds a per-token mean to the activations, and at the widths of the evaluated DiTs, the Hadamard rotations used by data-free methods cannot spread this mean uniformly across coordinates. A single dominant direction therefore survives the rotation and sets the quantization range. We introduce CentriQ, a calibration-free quantizer that centers each token before rotation and restores the mean exactly through a rank-1 full-precision branch, so that per-token scales follow in closed form without data. Weights are fitted under a robust $\ell_p$ objective that tracks the dense mode of each group and discounts heavy tails. Across three DiTs, CentriQ matches the quality of calibrated SVDQuant at 4 bits, whereas calibration-free weight quantizers with plain per-token activation quantization collapse or degrade substantially. CentriQ outperforms the strongest calibration-free method reported to date at 2-bit weights. It is also the first calibration-free method to retain usable image quality at 2-bit activations.

Image and video diffusion models allocate equal computation to every region, even when the intended scene calls for varying levels of detail. The spatial distribution of detail can often be anticipated before generation, indicating where computation can be reduced. We introduce Level-of-Token (LoT) Diffusion, a framework that turns this knowledge into an explicit multiresolution token layout (Level-of-Token layout) for adaptive and efficient generation. Tokens represent rectangular patches of varying sizes and shapes, allocating finer tokens where detail is needed and coarser tokens elsewhere. We adapt pretrained diffusion transformers to LoT layouts through a patch-wise asymmetric flow parametrization and embeddings for multiresolution tokens, preserving full-resolution flow prediction at every denoising step while processing only a reduced token sequence. LoT Diffusion enables layout-adaptive generation while preserving pretrained generative priors. We demonstrate LoT with layouts derived from semantic masks, bounding boxes, texture variance, and depth-of-field cues, as well as agentic plans. Across image and video generation, LoT offers favorable quality-efficiency tradeoffs, with significant speedups determined by the layout's token budget. Our project website is at https://georgenakayama.github.io/lotdiffusion/.

We introduce Loop Flow Transformers (LiFT), a family of looped generative models that scales computation by repeatedly applying a shared Diffusion Transformer (DiT) core, with only light changes to the standard architecture. Rather than asking every recurrent step for the final prediction, LiFT trains each step with a single regression target: a point on a straight path from the model's initial estimate to the flow-matching target. Because we index these targets by a continuous depth coordinate, a trained model can loop far beyond its training depth with no retraining, early exits, or other modifications. In our experiments, these longer rollouts improve generation, so inference computation can grow without adding parameters. On ImageNet at 256x256, LiFT-L/2 achieves an FID 3.34 points lower than our dense DiT-XL/2 baseline while using approximately 60% fewer parameters, 32% fewer training FLOPs, and 52% fewer inference FLOPs.

Generative foundation models are attracting interest for their ability to produce desired outputs from demonstrations given at inference time, without updating parameters. However, since a few demonstrations cannot uniquely identify the intended task, the challenge is how to learn and sample from an output distribution that reflects this task uncertainty. In this work, we theoretically analyze how a Diffusion Transformer (DiT), pretrained across diverse tasks, learns and generates predictive distributions for a new query from demonstrations. We first show that the natural target to generate from finite demonstrations is not an output derived from estimating a single task, but rather a predictive distribution that captures the task uncertainty remaining after observing the demonstrations. We then prove that a DiT can learn this predictive distribution through score estimation, using attention to aggregate information from demonstrations and diffusion to generate samples. Owing to this property, with sufficient pretraining resources and diffusion sampling steps, the resulting DiT achieves the minimax optimal rate over a Hölder class of test-time tasks. These results imply that DiT acts as a statistically grounded in-context generator capable of generating distributions adapted to new tasks while retaining the uncertainty inherent in finite demonstrations.

In diffusion transformers, a class label or a text prompt is embedded once, and the same condition is reused at every denoising step. We ask whether predicted embeddings can serve as this condition instead. Next-Embedding Predictive Autoregression (NEPA) trains a Transformer to predict the next continuous embedding in a sequence. In generation, the clean image follows the noisy image, so its embeddings are the next embeddings after the condition and the noisy image. We train a NEPA model to predict them all at once with Multi-Embedding Prediction, and in Embedding Conditioned Generation, a DiT generator is conditioned on these predictions, recomputed at every denoising step, so the conditioning signal adapts to the current noisy state. Experiments on class-conditional ImageNet $256\times256$ study the condition of the generator, the design of Multi-Embedding Prediction, and the scaling of both models. The NEPA model adds a second network to every sampling step; with it, and combined with REPA, our final model, NEPA-DiT-XL, reaches an FID of 1.32 using about a third of the training compute of REPA.

Representation alignment has become an effective way to accelerate diffusion training, but its benefits do not transfer reliably to pixel-space clean-image prediction. In JiT, we find that auxiliary feature alignment can improve access to semantic features while reducing access to image variation needed for clean-image prediction, creating a mismatch between the auxiliary objective and the denoising task. This suggests a different principle: auxiliary supervision should improve the prediction target itself rather than impose a separate representation target. We introduce JAx (Just Align x), a prediction-supervision method that aligns clean-image predictions across noise levels. JAx couples a noisier student observation with a cleaner observation through a Markov degradation that preserves the original JiT input distribution. Under this coupling, the oracle prediction from the cleaner state has the same conditional mean as the optimal JiT target, while its conditional target covariance is no greater. Thus, oracle prediction alignment preserves the population JiT objective up to a constant while providing a lower-variance training target. To make this construction practical with an imperfect EMA teacher, JAx combines ground-truth supervision with a reliability-gated coupling band that selects nearby teacher states based on prediction risk. On ImageNet 256x256, JAx consistently improves FID and accelerates convergence across JiT-B/16, L/16, and H/16, without an external encoder or changes to the architecture or sampling procedure. Gradient diagnostics further show reduced minibatch gradient variance, while ablations demonstrate that the gains cannot be explained by time reweighting alone. These results show that prediction-space supervision provides a simple and principled alternative to representation alignment for pixel-space generative models.

Representation alignment (REPA) accelerates diffusion transformer training, but its alignment targets are almost exclusively semantic encoders such as DINOv2 and CLIP. Recent analysis points to spatial structure, not global semantics, as the carrier of the alignment effect, yet dense-prediction foundation models trained to predict that structure remain overlooked as REPA targets. In pixel-space diffusion, SAM2, Depth Anything v2, and Metric3D v2 each outperform the DINOv2-only GenEval baseline, with the two geometric teachers leading the segmentation teacher. A flat sum of all four teachers, however, lands below the best single geometric teacher, as semantic and geometric gradients compete for one denoiser projection. We introduce PixelDense, which routes DINOv2 and SAM2 through a semantic projection stream, routes Depth Anything v2 and Metric3D v2 through a geometric projection stream, and adds a weight-space orthogonality penalty that keeps the two streams in disjoint subspaces. All four teachers are frozen during training and dropped at inference. Applied to PixelGen and DeCo with a single recipe, PixelDense improves GenEval, DPG-Bench, and HPS v2.1, raises PixelGen-XXL's GenEval Overall from 0.7927 to 0.8093, and beats every single-teacher and unfactored multi-teacher variant. In partial-noise reconstruction, independent panoptic, depth, and surface-normal probes show up to 53.1% PQ gain and 36.0% depth AbsRel reduction at $τ=0.5$ across COCO and Flickr30K. From random initialization, PixelDense also reaches the baseline's peak GenEval 1.23x faster. In SDEdit editing on PIE-Bench, PixelDense keeps more of the source background and layout at every edit strength, raising background PSNR by up to 2.2 dB.

Improving text-to-image models has traditionally relied on increasing model size or the number of denoising steps. In this work, we explore an alternative way to scale computation by repeatedly running shared Transformer blocks within each denoising step, effectively increasing computational depth while keeping the parameter count fixed. This looped computation enables iterative refinement of internal representations without explicit reasoning tokens. However, naive looping fails to consistently improve image quality. We trace this problem to weak supervision across intermediate loops and unregulated attention updates that progressively erode local information. To overcome these challenges, we propose Looped Diffusion Transformer (Looped-DiT), which combines deep supervision across intermediate loops with self-modulating attention to stabilize looped feature updates. Under matched-parameter and matched-compute settings, Looped-DiT consistently outperforms non-looped baselines. Notably, a 260M-parameter looped model can surpass a model 6.5x larger across multiple text-to-image benchmarks while requiring 4.9x lower inference compute. Beyond this performance gain, we find that looped computation can offer a more effective form of iterative computation for diffusion models, with increasing loop depth yielding larger gains than adding more denoising steps under a fixed inference budget. Furthermore, deeper loops can progressively correct mistakes made in earlier loops, exhibiting behaviors suggestive of latent reasoning. Together, these results show that looped computation offers a promising way to scale visual generation models.

Sparse autoencoders (SAEs) reveal visual structure in diffusion transformers (DiTs), but interpreting a feature does not establish whether it can be used to control generation. We introduce D-Scope (Diffusion Scope), a framework that connects feature interpretation to generation control through shared visual evidence. D-Scope aggregates SigLIP2 embeddings of highly activating image patches into visual centroids. Matching target text descriptions against these visual centroids in the shared image-text embedding space then enables retrieval of individual features without per-feature text annotations. The underlying patches provide evidence for inspecting each selection, while spatially masked interventions test the corresponding decoder direction at varying strengths under fixed generation conditions. We characterize 150 SAEs across two model families and five layers, and introduce a benchmark of 100 target concepts with ten contexts each spanning under-specified and explicit-conflict conditions. Our empirical results show that high reconstruction fidelity can coexist with low dictionary utilization and limited visual-evidence coverage. Under per-case best-of-sweep strength selection, contrastive retrieval yields larger mean regional SigLIP2 gains than direct retrieval across the tested steering configurations, without consistently improving outside-region preservation. D-Scope provides an inspectable framework for evaluating sparse DiT features through their visual evidence and the effects of their decoder directions on generation. The demo is available at https://jiahaozhang-public.github.io/d-scope/.

Diffusion Transformers (DiTs) have become a dominant architecture for video generation, but their efficiency is limited by the quadratic complexity of full attention. Sparse attention reduces this cost by retrieving important blocks and computing attention only within them, but inaccurate retrieval can either degrade generation quality or yield unnecessary computation. We identify two retrieval mismatches in methods that retrieve blocks using the averaged representations of query and key blocks: (i) query-side aggregation mismatch, where averaging queries before Softmax fails to preserve their individual attention preferences, and (ii) key-side clustering metric mismatch, where standard Euclidean clustering in the original key space can group keys with dissimilar QK scores under the current query, so their average representation may not accurately represent how the current query scores individual keys. These mismatches can lead to inaccurate block retrieval. To address these mismatches, we propose PARK, a training-free sparse attention method for accurate block retrieval. PARK retains every original query, independently normalizes its attention over key blocks, and then averages these distributions within each query block. It also uses information from the current queries to transform keys before clustering, so that keys receiving similar QK scores are grouped together. A fused GPU kernel further reduces the overhead of block retrieval. Experiments on HunyuanVideo and Wan demonstrate that PARK improves block retrieval accuracy and preserves generation quality while accelerating inference, achieving the best quality-efficiency trade-off among the compared sparse attention methods.

Real-time diffusion-based video super-resolution (VSR) is in high demand for online streaming, yet stringent latency requirements often compromise generative fidelity. We propose ReCaVSR, a Wan2.2-based, one-step framework for streaming VSR that builds on two observations: recycled SR latents retain local temporal context, reducing the need for full historical Key-Value (KV) caches; and individual transformer layers benefit from distinct temporal scopes. ReCaVSR combines three complementary designs: (i) layer-wise cache routing with recycled SR latents: each DiT layer learns its KV-cache temporal scope under a cache budget and exports a static inference schedule, while recycled SR latents propagate local context by conditioning each new block on the model's own preceding predictions. (ii) Multi-Scope Query (MSQ) Discriminator: a compositional discriminator combining global, spatial-window, and temporal-tube feedback for holistic realism, local texture generation, and temporal stability. (iii) LR-conditioned adaptation of FlashDecoder: a VAE decoder that incorporates LR observations for efficient latent decoding. ReCaVSR enables streaming VSR without iterative sampling or full historical KV-cache materialization. Experiments on synthetic and real-world VSR benchmarks show better perceptual quality, temporal consistency, and streaming efficiency than representative VSR baselines. At $1080{\times}1920$ output resolution on a single NVIDIA A100-80GB, ReCaVSR achieves 21.20 FPS with 15.16 GB peak allocated GPU memory, running 2.72$\times$ faster while using 38.0% less peak allocated memory than FlashVSR Tiny. The code is available at https://github.com/kopperx/ReCaVSR.

Video diffusion transformers (DiTs) increasingly adopt mixture-of-experts (MoE) architectures to reduce active computation, but their full expert storage remains costly. Existing one-shot pruning criteria mainly rely on static activation or routing statistics and cannot capture layer-level re-routing after expert deletion. We introduce DIET, a training-free expert pruning framework based on deletion responses. A single all-expert calibration pass records expert outputs and router states for matched conditional and unconditional tokens. Candidate deletions are then replayed from cached tensors, requiring no additional model forward passes. The resulting deletion-response signatures characterize each expert by the changes induced when it is removed. DIET selects retained experts by minimizing Overall Diversity Loss (ODL), which preserves directional coverage in signature space, and combines intra-layer local search with an inter-layer regression-guided budget search to allocate experts across layers. On LingBot-Video 30B-A3B, pruning 50% of experts (6,144 to 3,072) reduces the checkpoint from 57 GB to 30 GB and enables single-card deployment on a 48 GB GPU without fine-tuning. Under a fixed 284-case VBench protocol, the VBench Total increases from 0.7941 to 0.8115. Across tested retention budgets, DIET consistently outperforms competitive pruning baselines adapted from large language models.

Latent Diffusion Models (LDMs) typically adopt a two-stage pipeline: an auto-encoder (AE) is first pre-trained to define a latent space, then a diffusion model is trained to perform denoising within it. Such a two-stage design introduces a representation mismatch, as the latent space is optimized for reconstruction rather than adapting the denoising dynamics. We reveal that the LDM itself is an AE, and consequently present LDM-is-AE, an end-to-end one-stage LDM training framework that eliminates the need for a separately trained tokenizer. Our key observation is that the LDM backbone actually performs a latent-to-feature-to-latent transformation at each denoising step, which can be interpreted as an internal decoding--encoding process. Leveraging this structure, we split the DiT backbone into two reciprocal components, DiT-E (i.e., DiT Encoding) and DiT-D (i.e., DiT Decoding), and impose image-space supervision on the intermediate features across all timesteps. Our model encourages the internal representation to align with the image domain throughout denoising, thereby establishing an explicit latent-to-image-to-latent path. At the zero-noise timestep, our model further performs an image-to-latent-to-image mapping, corresponding to an auto-encoding process. As a result, LDM-is-AE jointly learns latent representations and denoising dynamics in an end-to-end manner, yielding a diffusion-native latent space tailored to the generation process. Experiments demonstrate that LDM-is-AE exhibits highly competitive generation performance, achieving an FID of 1.80 and 1.90 on 256x256 and 512x512 class-conditional image generation, respectively.

Precipitation nowcasting demands accurate short-term forecasts under strong spatiotemporal variability. Diffusion models are well suited to modeling complex precipitation distributions, yet existing approaches often introduce increasingly specialized designs, leaving the capability of a standard diffusion architecture underexplored. We show that a standard Diffusion Transformer already provides a simple and scalable foundation for precipitation nowcasting, with domain-specific requirements accommodated naturally within its design space. Based on this principle, we develop NowcastDiT and instantiate this flexibility through two complementary adaptations: a dynamics-aware noise prior for temporally coherent forecasts, and end-to-end reinforcement learning with timestep-aware rewards for meteorological skill. Experiments on SEVIR and MRMS benchmarks show that NowcastDiT achieves state-of-the-art performance in both perceptual quality and meteorological skill. These results suggest that standard DiT can serve as an effective foundation for precipitation nowcasting.

Diffusion Transformers (DiTs) enable high-quality video generation but suffer from substantial inference latency, primarily attributable to the computationally expensive full spatio-temporal attention. While sparse attention methods offer potential solutions, existing approaches face an inherent flexibility--efficiency dilemma: predefined masks lack the flexibility to capture diverse attention patterns, while runtime-determined masks introduce overheads and sacrifice hardware efficiency. We identify the lack of a unified structural characterization of DiT attention as a key limitation of existing methods, and establish that video DiT attention exhibits \textbf{periodic diagonal stripe structures} along both temporal and spatial dimensions. To formally encode these structured patterns within a single efficient kernel, we present {\bf PSA}, a parameterized stripe attention that formalizes the observed stripe regularity, unifying diverse attention patterns for efficient mask generation. This unified representation enables a single hardware-efficient CUDA kernel to process all sparse patterns, achieving FlashAttention-3-level Model FLOPs Utilization. To determine optimal sparsity configurations, we propose a training-free offline search algorithm that automatically maximizes sparsity under a specified error tolerance for each attention head. Experiments on HunyuanVideo and Wan~2.1 demonstrate that PSA achieves 1.57$\times$ and 1.37$\times$ end-to-end speedups over FlashAttention-3 baselines, with acceptable visual quality degradation.

Text-to-video (T2V) diffusion models can generate realistic depictions of actions such as kicking, stabbing, and shooting, raising safety concerns that motivate targeted concept erasure. Although concept erasure has been extensively studied for static concepts in text-to-image and T2V models, erasing motion concepts remains largely unexplored. We present a systematic study of motion concept erasure in video Diffusion Transformers (DiTs). Through causal interventions, we show that text-conditioning attention carries concept-specific motion information and supports selective intervention, whereas perturbing temporal positional encoding suppresses both target and non-target dynamics. We further find that directly adapting ESD, a representative weight-level image erasure method, to a video DiT yields modest and uneven motion suppression: reducing its erasure training loss does not by itself remove the concept signal from the difference between the conditional and unconditional predictions, which classifier-free guidance (CFG) then scales at every denoising step. From these findings, we derive three requirements for motion concept erasure: concept specificity, spatial selectivity, and temporal naturalness. Each determines one component of MUTE (Motion concept Unlearning in Text-to-video gEneration): at each denoising step, MUTE extracts a concept direction through token neutralization, derives a spatial gate from the direction's intrinsic structure, and subtracts the resulting correction from the velocity output before CFG is applied. MUTE is training-free and requires no weight modification. Experiments on 20 motion concepts show that MUTE outperforms representative prompt-level, weight-level, and inference-time baselines on Wan2.1-T2V, and the same formulation transfers to CogVideoX, supporting its applicability across distinct T2V attention architectures.

Diffusion-based video restoration recovers realistic details, but its practical deployment is limited by two efficiency bottlenecks: costly VAE encoding and decoding, and the quadratic cost of full self-attention in diffusion transformers (DiTs). This paper presents FastVR, a streaming video restoration framework built on a one-step diffusion model, which delivers strong restoration quality and temporal consistency while processing 1080p video at 11 FPS on a single H20 GPU. To improve inference efficiency, FastVR combines a lightweight VAE with chunk-wise causal attention, which substantially reduces the computational cost. During training, it further adopts velocity consistency regularization and continuous trajectory learning, which improve restoration quality. Extensive experiments show that FastVR is more efficient than the evaluated diffusion baselines while achieving state-of-the-art performance on synthetic and real-world benchmarks. We hope that this work supports further progress in the community.

Generative and representation learning remain asymmetrically connected: semantic representations are used to improve diffusion generation, whereas the models' own representations are often treated as a by-product of synthesis. We ask whether diffusion models can instead be trained to learn substantially stronger semantic representations without sacrificing generation quality. SelfFlow takes a step in this direction by introducing self-supervised patch alignment into flow matching, but its main gains remain in faster convergence and improved generation. Inspired by DINO and iBOT, we extend this framework with cross-view class-token alignment to further strengthen semantic representations. Specifically, we form two independently noised, dual-timestep observations of each image and align each student class-token representation with the stop-gradient EMA-teacher target from the other observation. This objective is optimized jointly with the inherited flow-matching and local patch objectives. Notably, although the additional objective acts only on the class token, it strengthens both class-token and patch representations. Compared with a matched two-view baseline, ImageNet linear-probing accuracy improves by 9.4% using the class token and 10.1% using mean-pooled patch tokens, while frozen-backbone VOC2012 segmentation improves by 3.6 mIoU. These representation gains are achieved while maintaining comparable ImageNet generation FID. In text-to-image training, the same objective also improves generation FID, reducing it from 2.52 to 2.37 at matched checkpoints. Our results show that representation need not remain a by-product of generation or merely a tool for improving it: it can be directly optimized as a first-class capability of diffusion pretraining alongside generation.

Pixel-space diffusion Transformers (DiTs) directly operate on high-dimensional visual data, yet their hidden representations typically undergo uniform refinement across depth. Natural images, however, are inherently organized at different levels of granularity. Global structure can often be represented compactly, whereas local textures and fine details require richer representations. Motivated by this, we introduce heterogeneous refinement in pixel-space DiTs, assigning different feature groups distinct refinement budgets across depth. Consequently, an ordered feature specialization emerges: sparsely refined features predominantly encode global visual structure, whereas more frequently refined features increasingly specialize toward localized, high-frequency details. We refer to these two groups as persistent and active features, respectively. Building on this emergent specialization, we introduce Persistence Forcing (PerF), which explicitly exploits this persistent--active feature organization for pixel-space image generation. This enables persistent features to continuously condition actively refined features, allowing stable global information to guide the ongoing refinement of finer visual details. During generative sampling, this interaction further induces a meaningful guidance direction that promotes coherent global structure and naturally complements classifier-free guidance. On ImageNet $256\times256$, PerF-L achieves FID of $1.91$, approaching $1.86$ of JiT-H with only half the parameters, while PerF-H further achieves FID of $1.63$ and $1.76$ on ImageNet $256\times256$ and $512\times512$, respectively.

Recent representation alignment (REPA) methods accelerate diffusion transformer training by aligning projections of the transformer's hidden states with representations from pretrained visual encoders. In this work, we explore a reverse and complementary direction to REPA: rather than projecting diffusion representations into the encoder's space, we inject encoder representations into the diffusion transformer, allowing them to actively participate in the denoising process. To this end, we introduce \textit{REPresentation Injection} (REPI), a training framework based on a scaffold-to-internalization strategy, in which projected encoder representations initially serve as a temporary scaffold and are then progressively internalized by the diffusion transformer. REPI outperforms REPA across a wide range of backbones and is highly complementary to it: combining the two yields substantial gains over either alone. Notably, with only 160K training steps, REPI + REPA matches vanilla SiT trained for 7M steps, a speedup of over $43.5\times$. Code will be available at https://jeneveuxpas.github.io/REPI

Representation alignment speeds up diffusion transformer training by pulling an intermediate block of the model (student) toward features of a frozen pretrained encoder (teacher). Which teacher layer to align, and for how long, is still set by convention, and each alternative costs a training run. We find that alignment helps where the student cannot linearly recover the teacher's features, not where it already resembles them. Since a deep teacher layer is largely predictable from the one below, we isolate what each layer adds, its increment, and measure how much of it an unaligned student recovers. The student fills the teacher's hierarchy from the bottom up and stalls near the top, which we call hierarchy filling: even after 400K steps it recovers almost none of the deepest. The recoverability gap is the unrecovered share of an increment, read from one unaligned checkpoint. In short runs that each align one teacher layer at one block, the gap nearly reproduces their ranking by FID improvement, and CKA, a measure of feature similarity, largely reverses it. Representation Alignment and Recoverability Estimation (RARE) picks the teacher layer with the largest gap before training. During training, it tracks each token's remaining distance to that layer, the online counterpart of the gap, weights tokens by it, and phases out the loss once the average distance stops falling. With SiT-B/2 on ImageNet $256\times256$, RARE reaches an FID of 18.02 without guidance and 4.46 with it, ahead of seven alignment baselines including REPA, iREPA and HASTE. It also trains in 14% fewer GPU-hours than iREPA. Its FID stays below iREPA's across model scales, teachers, datasets and backbones.