Displacement Fields

Internal voids are ubiquitous defects in manufactured structures, yet their characterization remains challenging because their geometry is hidden and can only be inferred indirectly from accessible measurements. Here we introduce \textit{GenVoid}, a physics-informed generative model-based framework for identifying internal voids in complex two- and three-dimensional solids from surface displacement measurements alone. By incorporating the governing mechanics into a generative inference framework, \textit{GenVoid} enables void identification across linear elastic, hyperelastic and plastic material behaviours and accommodates complex two- and three-dimensional structural geometries. Importantly, the framework explicitly accounts for uncertainty and noise in displacement measurements, producing probabilistic reconstructions of internal void geometry rather than a single deterministic estimate. We demonstrate the approach using high-fidelity synthetic datasets and experimentally measured displacement fields obtained from in-situ mechanical experiments, establishing its ability to infer hidden voids from realistic displacement measurements. To quantify the fundamental limits of such inference, we further introduce an observability measure that characterizes the sensitivity of boundary measurements to localized stiffness perturbations within the interior under an ensemble of applied loads. This framework provides a direct connection between defect location, sensor configuration and reconstruction fidelity, enabling systematic assessment of how the number and spatial distribution of boundary measurements govern void-identification accuracy. To this end, these results establish a physics-informed and uncertainty-aware approach for non-invasive characterization of hidden defects and provide a quantitative basis for designing measurement strategies for inverse problems in solid mechanics.

Understanding and inferring dislocation microstructures from diffraction patterns remains an open challenge in materials characterization, as diffraction measurements provide only indirect information about the underlying dislocation structure. In this work, a cross-modal learning framework is developed to enable the prediction of 3D dislocation structures directly from diffraction data. Dislocation density fields generated from discrete dislocation dynamics simulations are paired with corresponding virtual X-ray diffraction patterns and embedded into a shared 2D latent space using contrastive learning. The alignment between structural and diffraction representations of dislocation structures is evaluated directly in the learned latent space using correlations between corresponding latent features. To estimate the role of dataset size for this approach, farthest point sampling is employed to construct representative and diverse training subsets of varying sizes. The results show strong cross-modal alignment and that model performance improves rapidly with increasing dataset size. Near-saturation is achieved with approximately 500 representative observations from a dataset of 10,000 observations, enabling accurate prediction of dislocation density fields from previously unseen diffraction data of the same distribution. Qualitative comparisons confirm that the predicted structures capture the dominant spatial features of the underlying dislocation microstructures. These findings demonstrate an efficient approach for learning structure-diffraction relationships and highlight the potential for inferring structural characteristics of dislocation networks directly from diffraction patterns, providing a pathway toward diffraction-based structural analysis and future extension to experimental data.

Digital volume correlation (DVC) provides three-dimensional full-field displacement measurements from volumetric images, but how the internal resolution of a machine-learning-based DVC model affects accuracy and operating range remains poorly understood. Here, we present RAFT-DVC, a resolution-aware family of recurrent all-pairs field transforms (RAFT)-based DVC solvers with encoder downsampling factors s = 2, 4, and 8. Using a matched design, we find that the three solvers localize displacement to approximately 0.017 feature-grid voxel, giving an empirical raw-volume error scaling of approximately 0.017s voxel. The solvers exhibit complementary operating regimes governed jointly by displacement reach and volumetric-texture compatibility. Synthetic benchmarks show that RAFT-DVC achieves errors of the same order as tuned classical DVC under fine-texture, small-to-moderate-displacement conditions and becomes competitive or advantageous under coarse-texture, large-displacement conditions. Frequency-swept tests quantify deformation spatial resolution, while tiled inference enables dense estimation on large volumes. Evaluation on confocal volumetric images acquired during indentation illustrates the importance of matching solver operating regime to deformation magnitude and image texture. Tests on micro-CT images of elastomeric foam, despite training only on particle-labeled synthetic data, provide evidence of cross-texture transfer. We also identify coordinate-order inconsistencies in three-dimensional RAFT correlation sampling and introduce a non-cubic impulse test to verify sampler geometry independently of network training. Correcting the sampler improves native-input accuracy and generalization to unseen volume dimensions. Together, these results establish RAFT-DVC as a fast, resolution-aware framework for dense DVC with characterized accuracy and operating regimes.

pyALDIC is an open-source Python implementation of augmented Lagrangian digital image correlation (AL-DIC) for full-field displacement and strain measurement. The software combines a graphical user interface with a scriptable Python API and supports adaptive quadtree meshing, mask-aware subset splitting near cracks and holes, and selectable Local DIC and AL-DIC solver modes. Numba acceleration enables efficient analysis, while automated tests, documentation, and reproducible examples support reliable use acrossWindows, macOS, and Linux. Verification cases include synthetic displacement fields, rigid-body motion, Mode-I cracking, adaptive refinement, and experimental uniaxial tension. pyALDIC is distributed through PyPI, GitHub, and Zenodo under a BSD-3-Clause license for reproducibility. pyALDIC is openly available at https://github.com/zachtong/pyALDIC.

Estimating spatially heterogeneous elastic properties from low-resolution displacement measurements is a severely ill-posed inverse elasticity problem because low resolution obscures spatial details needed to distinguish heterogeneous property variations, and small measurement perturbations or fitting errors are amplified through inverse estimation. Existing inverse methods often rely on high-fidelity observations and manually prespecified loss weights, limiting their adaptability and making them sensitive to noise and resolution degradation. We propose a Probabilistic Inverse Elasticity Physics-Informed Neural Network (PIE-PINN) framework for robust estimation of Young's modulus and Poisson's ratio from noisy, low-resolution displacement data. PIE-PINN models displacement observation, strain-discrepancy, and equilibrium residuals using Laplace distributions within a unified probabilistic model. To improve robustness, the framework combines a B-spline-guided displacement network with a hierarchical half-Cauchy model for displacement residual scales. The B-spline provides a smooth global representation of the displacement field, while the neural network correction captures local variations. The hierarchical scale model adaptively downweights severe displacement fitting errors, enabling more robust recovery of the latent mean displacement field. An alternating maximum-likelihood training strategy updates the mean through weighted residual minimization and updates the scales to adjust the loss weights. Systematic case studies across varying noise levels and observation resolutions demonstrate the robustness of PIE-PINN.

This work aims to develop a fast and physically consistent surrogate model for real-time structural health monitoring of fractured elastic domains. We propose a physics-informed DeepONet framework that predicts displacement fields from both boundary conditions and fracture geometry, using a dedicated encoding strategy for the latter and without relying on finite-element-generated training data. The traction-free condition on the fracture boundary is imposed weakly through a localized penalty term. The presented numerical example focuses on one representative fracture geometry, demonstrating the feasibility of the formulation and laying the groundwork for extensions to surrogate modeling across diverse fracture geometries.

Identifying anisotropic yield functions remains challenging since yielding is not directly observed in full-field mechanical measurements, directional calibration can require many loading directions, and selecting an appropriate analytical form is nontrivial. This study proposes a physics-informed framework for discovering yield functions from full-field displacement data and reaction force data, without stress observations, plastic strain measurements, direct yield surface data, or a prescribed parametric yield function. The framework identifies the yield function as a mechanically constrained constitutive component inside elastoplastic stress integration, rather than through direct stress-space supervision. The yield function is represented by a convex neural network that enforces convexity and positive homogeneity of degree one while imposing the assumed tension-compression symmetry, and this neural yield function is trained with a differentiable stress update and a physics-informed force equilibrium loss across multiple loading cases. The proposed framework is validated using finite element (FE) benchmark studies with von Mises, Hill 1948, and Yld2000-2d yield functions, assessing yield contour agreement, displacement-noise sensitivity, identifiability through plastically active stress states, epistemic uncertainty, and polynomial-surrogate deployment. This study provides a mechanics-constrained pathway for discovering anisotropic yield functions from displacement and force data while keeping the identified component within the structure of elastoplastic stress integration.

We present a probabilistic modeling framework for incorporating small-scale spatial heterogeneity into macroscopic descriptions of material behavior for polycrystalline metallic materials. Spatially heterogeneous material state fields are represented using probability density functions (PDFs), providing a principled statistical description of microstructural variability and state evolution across different computational polycrystalline realizations. The framework is built on the inverse identification of a probabilistic transport model, formulated as a Liouville equation with an unknown drift term. To enable accurate, stable, and interpretable inference of this drift field in high-dimensional, transport-dominated settings, we develop a Separable Probability Learning Technique via Physics-Informed Neural Networks (SPLIT-PINN). This method incorporates a marginal-correction drift decomposition, orthogonality constraints, and residual-based adaptive training to enhance well-posedness, numerical stability, and physical consistency without imposing restrictive parametric assumptions. Using SPLIT-PINN, the drift field governing the temporal evolution of joint state PDFs is inferred directly from data. After benchmark validation, the framework is applied to physical computational datasets describing the evolution of polycrystalline microstructural states, including von Mises stress, dislocation density, and equivalent plastic strain rate. The learned Liouville model, trained on a single dataset, is subsequently used in forward predictions of the temporal evolution of joint and marginal PDFs for multiple unseen polycrystal realizations. Quantitative comparisons with reference PDFs demonstrate that the proposed framework yields accurate and robust probabilistic predictions and generalizes effectively across datasets.

Reliable displacement measurement is fundamental for structural health monitoring and digital engineering workflows, as it provides direct structural response information. Vision-based measurement has emerged as a promising approach for low-cost, non-contact displacement monitoring. However, its deployment often remains constrained by task-specific model training or on-site preparation, such as marker installation or manual camera calibration. This study presents a Vision Foundation Model-based framework for Structural Displacement Measurement (VFM-SDM) that integrates VFM-inferred camera parameter estimation and point tracking to reconstruct multi-directional structural displacements via triangulation without task-specific training or on-site preparation, enabling efficient non-contact deployment in real-world applications. Structural geometry constraints are incorporated to suppress physically implausible deviations and improve estimation consistency. A multi-modal field dataset collected from an in-service pedestrian bridge is introduced alongside a unified benchmarking protocol to support reproducible evaluation. Representative results show low amplitude errors (NRMSE$_{\text{range}}$: 0.11/0.12), strong temporal agreement (correlation coefficient: 0.86/0.88), and small peak-to-peak amplitude errors (RPPAE: 0.01/0.02) for vertical and lateral displacements, indicating robust performance under real-world conditions. The proposed framework advances automated, scalable displacement monitoring and lays the groundwork for VFM-enabled structural response measurements in digital twin and data-centric construction workflows.

Optimal transport (OT) is a central framework for modeling distribution shifts. Because OT compares distributions directly in input space, a well-designed ground metric between observations is essential to ensure that the optimizer does not violate the true geometry of change. We propose Displacement-Reshaped Optimal Transport (ReshapeOT), a method that reshapes the ground metric by integrating observed sample displacements as an additional source of knowledge. Technically, ReshapeOT replaces the Euclidean metric with a Mahalanobis distance estimated from displacement second moments. This effectively carves expressways through the input space, inviting transport solutions that better align with observed displacements. Our method is computationally lightweight, integrates seamlessly into any OT solver that operates on a cost matrix, and can be kernelized for further flexibility. Experiments on synthetic and real-world data show that ReshapeOT achieves substantial gains in transport reliability. We further demonstrate our method's usefulness in two practical use cases.

Whole-body Positron Emission Tomography (PET) registration is essential for multi-parametric tumor characterization and assessment of metastatic disease progression. In deep learning-based deformable registration, the dense displacement field (DDF) regularizer is crucial for stabilizing optimization and preventing unrealistic deformations in large 3D volumes. A key challenge in whole-body deformable registration is anatomical heterogeneity, rigid structures (e.g., bones) should undergo stronger regularization, whereas soft tissues require more flexible deformation and weaker constraints. In this work, we propose a simple yet effective CT-guided spatially-varying regularization strategy for whole-body cross-tracer deformable PET registration. The key idea is to use the paired CT volume from the PET/CT acquisition to construct a voxel-wise regularization map for the DDF, replacing the conventional single global regularization weight. This yields anatomy-adaptive regularization strength across rigid and soft tissues. The proposed method is evaluated on a real clinical cross-tracer PET/CT dataset of 296 patients involving 18F-PSMA and 18F-FDG, showing that the proposed method achieves statistically significant improvements over weakly-supervised registration baseline in both whole-body registration performance and organ-wise alignment.

Directed energy deposition (DED) produces complex thermo-mechanical responses that can lead to distortion and reduced dimensional accuracy of a manufactured part. Thermo-mechanical finite element simulations are widely used to estimate these effects, but their computational cost and the complexity of accurately capturing DED physics limit their use in design iteration and process optimization. This paper introduces FLARE (Field Prediction via Linear Affine Reconstruction in wEight-space), a data-efficient surrogate modeling framework for predicting post-cooling displacement fields in DED from geometric and process parameters. We develop a predefined-geometry DED simulation workflow using an open-source finite element framework and generate a dataset of simulations with varying geometry, laser power, and deposition velocity. Each simulation provides full-field displacement, stress, strain, and temperature data throughout the manufacturing process. FLARE encodes each simulation as an implicit neural field and regularizes the corresponding neural-network weights so that they follow the affine structure of the input parameter space. This enables prediction of unseen parameter combinations by reconstructing network weights through affine mixing of training examples. On this DED benchmark, the method shows improved accuracy compared to baseline methods in both in-distribution and extrapolation settings. Although the present study focuses on DED displacement prediction, the proposed affine weight-space reconstruction framework offers a promising approach for data-efficient surrogate modeling of physical fields.