Low-Bit Quantization

The Muon optimizer has emerged as a compelling alternative to Adam for training large language models, achieving remarkable computational savings through gradient orthogonalization. However, Muon's optimizer state is more sensitive to quantization errors: because the orthogonalization discards the magnitudes of singular values and retains only directional information, even small quantization errors in singular vector directions are amplified in the update. In this work, we propose MuonQ, a low-bit Muon training framework built on the principle of directional fidelity optimization. First, we apply a pre-quantization normalization so that each step introduces quantization errors of the same magnitude, preventing the accumulated error from developing a preferred direction. Second, we introduce a structural decomposition that separately quantizes the dominant singular components via power iteration, ensuring that quantization errors perturb only singular value magnitudes rather than rotating singular vector directions. Third, we adopt $μ$-law companding quantization to allocate higher resolution to densely packed momentum values, shifting the quantization objective from outlier preservation to dense-region distinguishability. Together, these techniques enable stable 4-bit quantization of Muon's optimizer states. Pre-training experiments on GPT-style and LLaMA-style models demonstrate that MuonQ at 4-bit precision closely matches full-precision Muon in both training loss and downstream task accuracy, while reducing optimizer state memory by up to 7.3 $\times$. Our code is available at https://github.com/YupengSu/MuonQ.

Quantization is an effective strategy to reduce the storage and computation footprint of large language models (LLMs). Post-training quantization (PTQ) is a leading approach for compressing LLMs. Popular weight quantization procedures, including GPTQ and RTN, suffer in model utility, especially at aggressive quantization levels (sub-4-bit). We propose ADMM-Q, a novel weight quantization algorithm that considers the layer-wise quantization problem. Our algorithm is based on a combinatorial variant of the Alternating Direction Method of Multipliers (ADMM). Our operator-splitting procedure updates weights continuously to minimize the layer-wise reconstruction error, while gradually enforcing the quantization constraints with convergence guarantees. We propose additional algorithmic enhancements (e.g., penalty scheduling, preconditioning, and a local search post-processing step) to make ADMM-Q efficient at LLM scale. ADMM-Q is modular and can be used as a drop-in replacement for any weight quantizer within existing quantization pipelines: ADMM-Q is fully composable with existing techniques including range clipping, learned or random rotations, and activation scaling. Using ADMM-Q in place of GPTQ on Qwen3-8B, we decrease WikiText-2 perplexity in: (i) the W3A16 weight-only setting (12.85 $\rightarrow$ 10.06); (ii) the W4A8 SmoothQuant procedure (9.29 $\rightarrow$ 8.68); and (iii) the W2A4KV4 SpinQuant procedure (66.11 $\rightarrow$ 19.42).

Post-training quantization has emerged as a widely adopted technique for compressing and accelerating the inference of Large Language Models (LLMs). The primary challenges in LLMs quantization stem from activation outliers, which significantly degrade model performance especially at lower bit precision. While recent approaches attempt to mitigate outliers through linear transformations across feature dimensions, our analysis reveals that the transformed weights and activations still exhibit persistent outlier patterns with concentrated magnitude distributions. In this paper, we first model the mathematical relationship between quantization error and outliers, and then introduce a new metric Flatness to quantify the distribution of outliers. Based on this, we derive the theoretical optimal solution with respect to Flatness. Building on these insights, we propose Bidirectional Diagonal Quantization (BDQ), a novel post-training quantization framework that effectively disperses outlier patterns through optimized matrix transformations. BDQ strategically distributes outlier magnitudes across matrix dimensions via learned diagonal operations. Extensive experiments demonstrate that BDQ establishes a new quantization benchmark. It achieves less than 1% accuracy drop in W4A4 quantization on the LLaMA-3-8B model. In the more challenging W2A4KV16 experiment, compared to state-of-the-art approaches, BDQ reduces the performance gap by 39.1% on the DeepSeek-R1-Distill-LLaMA-70B model.

Large-scale visual generative models have achieved remarkable performance. However, their high computational and memory costs make deployment challenging in resource-constrained scenarios, such as interactive applications and personal single-GPU usage. Post-training quantization (PTQ) offers a practical solution by compressing pretrained models without expensive retraining. However, existing PTQ methods still suffer from severe quality degradation under extremely low-bit settings. In this paper, we identify channel ordering as an important but underexplored factor in per-group quantization. In this setting, each contiguous group shares one quantization scale. When channels with very different statistics are placed in the same group, the scale can be dominated by outliers and cause large quantization errors. Based on this observation, we propose PermuQuant, a simple and effective PTQ framework for low-bit diffusion models. PermuQuant sorts channels by a joint second-moment criterion before per-group quantization, placing channels with similar activation and weight statistics into the same group. It further uses a calibration-based acceptance rule to apply reordering only when the selected permutation reduces quantization error on calibration data. The selected permutations are absorbed into adjacent modules or applied to weights offline, avoiding explicit runtime permutation operations. Extensive experiments on multiple large diffusion models show that PermuQuant consistently reduces quantization error and outperforms existing PTQ baselines. On FLUX.1-dev with an RTX 5090, PermuQuant achieves up to a 1.7$\times$ single step speedup and reduces the DiT memory footprint by 3.5$\times$ under W4A4 NVFP4 quantization. Code will be available at https://github.com/yscheng04/PermuQuant.

Large language models (LLMs) achieve strong performance but incur high deployment costs, motivating extremely low-bit but lossy quantization. Existing quantization algorithms mainly focus on improving the numerical accuracy of forward computation to eliminate performance degradation. In this paper, we show that extremely quantized LLMs suffer from systematic smoothness degradation beyond numerical precision loss. Through a smoothness proxy, we observe that such degradation becomes increasingly severe as the quantization bit-width decreases. Furthermore, based on sequence neighborhood modeling, we find that quantized models exhibit a rapid reduction of effective token candidates within the prediction neighborhood, which directly leads to a sparser decoding tree and degraded generation quality. To validate it, we introduce a simple smoothness-preserving principle in both post-training quantization and quantization-aware training, and demonstrate that preserving smoothness brings additional gains beyond numerical accuracy. The core goal of this paper is to highlight smoothness preservation as an important design consideration for future extreme quantization methods. Code is available at https://github.com/xuyuzhuang11/FINE.

Microscaling is a critical technique for preserving the quality of Large Language Models (LLMs) quantized to ultra-low precision formats. Intuitively, finer block sizes should yield lower quantization error; however, a paradox recently identified by Fasoli et al. (2026) demonstrates that standard abs-max scaling can actually result in degraded model quality as block sizes shrink. In this work, we investigate the underlying mechanics of this phenomenon. We demonstrate that this degradation is not an inherent limitation of finer granularity, but is primarily driven by how elements in smaller blocks statistically cluster closer to their local block maximum, interacting poorly with the coarse subnormal E4M3 values used as scaling factors. Specifically, we show that i) preventing the scaling factor from underflowing to zero mitigates errors caused by extreme underflow, ii) targeted algorithmic interventions like the 4-over-6 methodology that give more flexibility to the choice of scaling factor resolve the paradox for larger values, and iii) a brute-force search establishes an optimal baseline, confirming that the theoretical Mean Squared Error (MSE) strictly improves with finer block sizes. Ultimately, our findings highlight a critical insight for hardware-software co-design: the block-size paradox is partially an artifact of naive scale selection. While using hierarchical scaling factors or wider formats like UE5M3 interchangeably resolves much of the quality loss, we found the 4-over-6 scale selection heuristic can even further improve quality, especially for very small block sizes. Consequently, maximizing the performance of next-generation ML accelerators will require treating silicon format specifications and software scaling algorithms as tightly coupled design choices.

Low-precision number formats are widely used in modern machine learning systems due to their efficiency. Accurate direction representation is key to the accuracy of vector operations. This work precisely explores the extent to which the direction of a vector can be represented by selecting its scalar elements from a common finite alphabet of a given size. This is standard practice in machine learning, where low-precision significands may be narrow-width floating-point or integer values. A geometric framework is introduced for analyzing the directional coverage of such product-structured codes. This work analytically quantifies the suboptimality gap between such product-structured codes and spherical codes for the vector as a whole, in both low and asymptotically high dimensions. Furthermore, within the product code class, it is proven that the standard formats of two's complement, fixed-point, and floating-point are suboptimal, again with quantified gap, pointing to the potential to develop new scalar number formats. Such scalar alphabets are numerically optimized across multiple block dimensions for directional coverage, including the dimension used in NVIDIA's NVFP4 format. Experimental results are presented comparing the performance of standard formats and the optimized alphabet. We find that for four bits, NVIDIA's choice of E2M1 closely approximates the optimized alphabet, providing a geometric explanation for its strong performance in low-precision machine learning workloads and an analytical understanding of the link between that superiority and block size. We provide open-source formal proofs in Lean for the theorems in this work, along with the experimental code and the optimized alphabets obtained.

Looped language models (LoopLMs) increase effective computational depth by repeatedly applying shared Transformer blocks without increasing the parameter count. However, this reuse makes them particularly sensitive to post-training quantization (PTQ). We systematically study PTQ in LoopLMs and identify three sources of degradation: distribution shift across roles, state reuse across loop transitions, and recursive error accumulation. We propose LoopQ, a loop-aware PTQ framework that preserves a shared quantized backbone while introducing lightweight adaptations. LoopQ combines loop-aware activation scaling and selective transformations to accommodate changing hidden-state distributions, cross-loop state alignment to stabilize transitions, and trajectory-aware calibration to limit accumulated error. Under W4A4 quantization, LoopQ achieves a 67.8% average relative improvement in five-task mean accuracy across four backbones and a conservative estimate of 75.2% for the average relative perplexity reduction across eight backbone-dataset pairs, compared with the strongest static PTQ baseline for each comparison.

Large Language Models (LLMs) have demonstrated remarkable capabilities. However, their massive parameter scale leads to significant resource consumption and latency during inference. Post-training weight-only quantization offers a promising solution by reducing model size and accelerating token generation through alleviating the memory-bound issue. Nevertheless, the presence of inherent systematic outliers in weights continues to be a major obstacle. While existing methods, such as scaling and rotation, attempt to address this issue, the performance remains unsatisfactory. In this paper, we propose Outlier Self-Absorption Quantization (OSAQ), which performs additive weight suppression guided by the second-order low-rank property for low-bit weight-only quantization of LLMs. Specifically, we observe that the Hessian exhibits low-rank consistency across different inputs, with certain directions consistently showing vanishing curvature. Leveraging this property, we identify a stable null space of the Hessian and then construct an additive weight transformation by linearly combining the vectors within this null space, thereby suppressing weight outliers without affecting the task loss. This additive transformation can be absorbed into the weights offline, requiring no inter-layer transformations and introducing no inference overhead. Moreover, the construction is efficiently achieved by a closed-form solution, without resource-intensive training or iterative procedures. Extensive experiments demonstrate that OSAQ effectively suppresses outliers and enhances low-bit quantization performance. For instance, in 2-bit quantization, OSAQ, when integrated with GPTQ, achieves over 40% lower perplexity compared to vanilla GPTQ.

Model quantization has become essential for efficient large language model deployment, yet existing approaches involve clear trade-offs: methods such as GPTQ and AWQ achieve practical compression but are lossy, while lossless techniques preserve fidelity but typically do not accelerate inference. This paper explores the middle ground of statistically-lossless compression through three complementary notions of losslessness for quantized LLMs. First, task-lossless compression preserves zero-shot benchmark accuracy within natural sampling variance and remains achievable at aggressive bitwidths. Second, we formalize the stricter notion of distribution-lossless compression, requiring the quantized model's next-token distribution to be practically indistinguishable from the original, and propose the Expected Acceptance Rate (EAR), the maximum token-agreement probability under optimal coupling, as a directly interpretable fidelity metric (for example, EAR >= 0.99 indicates 99% agreement). Third, we prove a gamma-squared variance law showing that symmetric quantization inflates noise variance by gamma squared relative to asymmetric quantization, making asymmetry necessary for distribution-lossless fidelity but not for task-level preservation. Using SLQ, a layer-wise non-uniform method with asymmetric quantization and wide bitwidth search, we achieve task-lossless compression at well below 4 bits per parameter (as low as 3.3 bits depending on the model), distribution-lossless compression at 5 to 6 bits per parameter on average, and inference speedups of 1.7 to 3.6x relative to FP16 with optimized kernels. Source code is available at https://github.com/IST-DASLab/SLQ.

Low-bit quantization is a practical route for efficiently deploying vision Transformers, yet activation outliers complicate fully quantized deployment. Existing methods either handle quantization post-training or suppress large activations during training; however, aggressively restricting outliers in vision models can lead to a poorer trade-off between full-precision and quantized accuracy. We argue that rather than simply suppressing outliers, the training objective should control the structural amplification that makes them harmful. To this end, we introduce Colinearity-Decay (CD), a structural regularizer for ordered matrix pairs within Transformer blocks. CD penalizes detrimental cross-matrix alignment and mitigates extreme activations without altering the architecture or task loss. Applied as a decoupled update, CD is non-invasive and introduces minimal training overhead. Across ImageNet-1K pre-training, COCO detection, and downstream fine-tuning, CD consistently boosts quantized accuracy across multiple pipelines while preserving, or even improving, full-precision performance. Ultimately, our results demonstrate that structural regularization effectively prepares vision Transformers for low-bit deployment with zero inference-time overhead.

Large language models (LLMs) have driven major progress in NLP, yet their substantial memory and compute demands still hinder practical deployment. Binarization can compress weights to 1 bit, fundamentally lowering compute and bandwidth cost. However, existing methods cannot address activation heavy tails and thus must keep activations in high precision, preventing true end-to-end acceleration. To overcome this limitation, we propose BWLA (Binarized Weights and Low-bit Activations), the first post-training quantization framework that preserves high accuracy while achieving 1-bit weight quantization together with low-bit activations (e.g., 6 bits). The Orthogonal-Kronecker Transformation (OKT) learns an orthogonal mapping via EM minimization, converting unimodal weights into symmetric bimodal forms while suppressing activation tails and incoherence. The Proximal SVD Projection (PSP) then performs lightweight low-rank refinement through proximal SVD projection, further enhancing quantizability with minimal overhead. On Qwen3-32B, BWLA reaches a Wikitext2 perplexity of 11.92 under 6-bit activations (vs. 38 from SOTA), improves five zero-shot tasks by more than 70%, and delivers 3.26 times inference speedup, demonstrating strong potential for real-world LLM compression and acceleration.

We present Activation Residual Hessian Quantization (ARHQ), a post-training weight splitting method designed to mitigate error propagation in low-bit activation-weight quantization. By constructing an input-side residual Hessian from activation quantization residuals (G_x), ARHQ analytically identifies and isolates error-sensitive weight directions into a high-precision low-rank branch. This is achieved via a closed-form truncated SVD on the scaled weight matrix W G^{1/2}_x . Experimental results on Qwen3-4B-Thinking-2507 demonstrate that ARHQ significantly improves layer-wise SNR and preserves downstream reasoning performance on ZebraLogic even under aggressive quantization. The code is available at https://github.com/BeautMoonQ/ARHQ.

Post-training quantization (PTQ) has become an important technique for reducing the inference cost of Large Language Models (LLMs). While recent mixed-precision methods improve ultra-low bit quantization by preserving critical subspaces in high precision, they typically construct these subspaces relying solely on activation statistics. This ignores the fundamental nature of linear operations, where the output perturbation is jointly driven by both activation and weight quantization noise. In this paper, we propose CoQuant, a joint weight-activation subspace projection method. By theoretically modeling the expected output error, CoQuant formulates a closed-form weighted PCA solution that balances activation and weight covariances to select the optimal high-precision subspace. Extensive experiments on Llama-3.2 and Qwen2.5 models show that CoQuant consistently outperforms strong PTQ baselines in both WikiText perplexity and zero-shot common-sense reasoning accuracy. These results demonstrate that joint weight-activation subspace modeling provides a principled and effective direction for low-bit LLM quantization. The source code is available at https://github.com/Zachary5895/CoQuant.

FlashAttention improves efficiency through tiling, but its online softmax still relies on floating-point arithmetic for numerical stability, making full quantization difficult. We identify three main obstacles to integer-only FlashAttention: (1) scale explosion during tile-wise accumulation, (2) inefficient shift-based exponential operations on GPUs, and (3) quantization granularity constraints requiring uniform scales for integer comparison. To address these challenges, we propose QFlash, an end-to-end integer FlashAttention design that performs softmax entirely in the integer domain and runs as a single Triton kernel. On seven attention workloads from ViT, DeiT, and Swin models, QFlash achieves up to 6.73$\times$ speedup over I-ViT and up to 8.69$\times$ speedup on Swin, while reducing energy consumption by 18.8% compared to FP16 FlashAttention, without sacrificing Top-1 accuracy on ViT/DeiT and remaining competitive on Swin under per-tensor quantization. Our code is publicly available at https://github.com/EfficientCompLab/qflash.

The deployment of intelligent reinforcement learning (RL) agents on resource-constrained edge devices remains a fundamental challenge due to the substantial memory, computational, and energy requirements of modern deep learning systems. While large language models (LLMs) have emerged as powerful architectures for decision-making agents, their multi-billion parameter scale confines them to cloud-based deployment, raising concerns about latency, privacy, and connectivity dependence. We introduce BitRL, a framework for building RL agents using 1-bit quantized language models that enables practical on-device learning and inference under severe resource constraints. Leveraging the BitNet b1.58 architecture with ternary weights (-1, 0, +1) and an optimized inference stack, BitRL achieves 10-16x memory reduction and 3-5x energy efficiency improvements over full-precision baselines while maintaining 85-98 percent of task performance across benchmarks. We provide theoretical analysis of quantization as structured parameter perturbation, derive convergence bounds for quantized policy gradients under frozen-backbone architectures, and identify the exploration-stability trade-off in extreme quantization. Our framework systematically integrates 1-bit quantized language models with reinforcement learning for edge deployment and demonstrates effectiveness on commodity hardware.

Efficient single-image super-resolution (SISR) requires balancing reconstruction fidelity, model compactness, and robustness under low-bit deployment, which is especially challenging for x3 SR. We present a deployment-oriented quantized SISR framework based on an extract-refine-upsample design. The student performs most computation in the low-resolution space and uses a lightweight re-parameterizable backbone with PixelShuffle reconstruction, yielding a compact inference graph. To improve quality without significantly increasing complexity, we adopt a three-stage training pipeline: Stage 1 learns a basic reconstruction mapping with spatial supervision; Stage 2 refines fidelity using Charbonnier loss, DCT-domain supervision, and confidence-weighted output-level distillation from a Mamba-based teacher; and Stage 3 applies quantization-aware training directly on the fused deploy graph. We further use weight clipping and BatchNorm recalibration to improve quantization stability. On the MAI 2026 Quantized 4K Image Super-Resolution Challenge test set, our final AIO MAI submission achieves 29.79 dB PSNR and 0.8634 SSIM, obtaining a final score of 1.8 under the target mobile INT8 deployment setting. Ablation on Stage 3 optimization shows that teacher-guided supervision improves the dynamic INT8 TFLite reconstruction from 29.91 dB/0.853 to 30.0003 dB/0.856, while the fixed-shape deployable INT8 TFLite artifact attains 30.006 dB/0.857.

Post-Training Quantization (PTQ) is critical for the efficient deployment of Large Language Models (LLMs). While 4-bit quantization is widely regarded as an optimal trade-off, reducing the precision to 2-bit usually triggers a catastrophic ``performance cliff.'' It remains unclear whether the underlying mechanisms differ fundamentally. Consequently, we conduct a systematic mechanistic analysis, revealing two qualitatively distinct failure modes: Signal Degradation, where the computational patterns remain intact but information precision is impaired by cumulative error; and Computation Collapse, where key components fail to function, preventing correct information processing and destroying the signal in the early layers. Guided by this diagnosis, we conduct mechanism-aware interventions, demonstrating that targeted, training-free repair can mitigate Signal Degradation, but remains ineffective for Computation Collapse. Our findings provide a systematic diagnostic framework for PTQ failures and suggest that addressing Computation Collapse requires structural reconstruction rather than mere compensation.

This technical note revisits the relationship between RaBitQ and TurboQuant under a unified comparison framework. We compare the two methods in terms of methodology, theoretical guarantees, and empirical performance, using a reproducible, transparent, and symmetric setup. Our results show that, despite the claimed advantage of TurboQuant, TurboQuant performs worse than RaBitQ in most tested settings of inner-product estimation, nearest-neighbor search and KV cache quantization. We further find that several reported runtime and recall results in the TurboQuant paper could not be reproduced from the released implementation under the stated configuration. Overall, this note clarifies the shared structure and genuine differences between the two lines of work, while documenting reproducibility issues in the experimental results reported by the TurboQuant paper.

Deploying large language models (LLMs) in resource-constrained environments is hindered by heavy computational and memory requirements. We present LBLLM, a lightweight binarization framework that achieves effective W(1+1)A4 quantization through a novel three-stage quantization strategy. The framework proceeds as follows: (1) initialize a high-quality quantized model via PTQ; (2) quantize binarized weights, group-wise bitmaps, and quantization parameters through layer-wise distillation while keeping activations in full precision; and (3) training learnable activation quantization factors to dynamically quantize activations to 4 bits. This decoupled design mitigates interference between weight and activation quantization, yielding greater training stability and better inference accuracy. LBLLM, trained only using 0.016B tokens with a single GPU, surpasses existing state-of-the-art binarization methods on W2A4 quantization settings across tasks of language modeling, commonsense QA, and language understanding. These results demonstrate that extreme low-bit quantization of LLMs can be both practical and highly effective without introducing any extra high-precision channels or rotational matrices commonly used in recent PTQ-based works, offering a promising path toward efficient LLM deployment in resource-limited situations.

Quantization has become a standard tool for efficient LLM deployment, especially for local inference, where models are now routinely served at 2-3 bits per parameter. The state of the art is currently split into simple scalar quantization techniques, such as GPTQ or AWQ, which are widely deployed but plateau in accuracy at 3-4 bits per parameter (bpp), and "second-generation" vector- or trellis-quantized methods, such as QTIP, GPTVQ and AQLM, which push the accuracy frontier but are notoriously hard to implement and to scale. In this paper, we ask whether this gap is fundamental, or whether a carefully optimized $\textit{scalar}$ quantizer can recover most of it. We answer in the affirmative, by introducing GSQ (Gumbel-Softmax Quantization), a post-training scalar quantization method which jointly learns the per-coordinate grid assignments and the per-group scales using a Gumbel-Softmax relaxation of the discrete grid. GSQ matches the cardinality of the relaxation to the small number of levels available in the target bit-width regime (e.g., 3-8 levels for ternary and 3 bpp, respectively), making optimization tractable. Practically, on the standard Llama-3.1-8B/70B-Instruct models, GSQ closes most of the gap between scalar quantization and the QTIP frontier at 2 and 3 bits, while using a symmetric scalar grid with group-wise quantization, and thus remains compatible with existing scalar inference kernels. We further show that the same discrete-assignment optimization can be applied to practical GGUF K-Quant checkpoints: starting from publicly released GGUF models, GSQ improves accuracy while projecting the result back into the same deployment format. Finally, GSQ scales to trillion-scale Mixture-of-Experts models such as Kimi-K2.5, where vector-quantized methods are difficult to apply. The source code is publicly available at https://github.com/IST-DASLab/GSQ.

This note clarifies the relationship between the recent TurboQuant work and the earlier DRIVE (NeurIPS 2021) and EDEN (ICML 2022) schemes. DRIVE is a 1-bit quantizer that EDEN extended to any $b>0$ bits per coordinate; we refer to them collectively as EDEN. First, TurboQuant$_{\text{mse}}$ is a special case of EDEN obtained by fixing EDEN's scalar scale parameter to $S=1$. EDEN supports both biased and unbiased quantization, each optimized by a different $S$ (chosen via methods described in the EDEN works). The fixed choice $S=1$ used by TurboQuant is generally suboptimal, although the optimal $S$ for biased EDEN converges to $1$ as the dimension grows; accordingly TurboQuant$_{\text{mse}}$ approaches EDEN's behavior for large $d$. Second, TurboQuant$_{\text{prod}}$ combines a biased $(b-1)$-bit EDEN step with an unbiased 1-bit QJL quantization of the residual. It is suboptimal in three ways: (1) its $(b-1)$-bit step uses the suboptimal $S=1$; (2) its 1-bit unbiased residual quantization has worse MSE than (unbiased) 1-bit EDEN; (3) chaining a biased $(b-1)$-bit step with a 1-bit unbiased residual step is inferior to unbiasedly quantizing the input directly with $b$-bit EDEN. Third, some of the analysis in the TurboQuant work mirrors that of the EDEN works: both exploit the connection between random rotations and the shifted Beta distribution, use the Lloyd-Max algorithm, and note that Randomized Hadamard Transforms can replace uniform random rotations. Experiments support these claims: biased EDEN (with optimized $S$) is more accurate than TurboQuant$_{\text{mse}}$, and unbiased EDEN is markedly more accurate than TurboQuant$_{\text{prod}}$, often by more than a bit (e.g., 2-bit EDEN beats 3-bit TurboQuant$_{\text{prod}}$). We also repeat all accuracy experiments from the TurboQuant paper, showing that EDEN outperforms it in every setup we have tried.

Deploying Vision-Language Models (VLMs) under aggressive low-bit inference remains challenging because inference cost is dominated by the long visual-token prefix during prefill and the growing KV cache during autoregressive decoding. Token pruning and low-bit quantization are complementary for reducing these costs, yet naive stage-wise combinations are often brittle due to a mismatch between quantization calibration and pruning execution. We present a collaborative quantization-and-pruning framework that unifies low-bit inference and deterministic visual-token pruning in a single deployable pipeline. The framework introduces the Quantization Unified Offline Token Allocator (QUOTA), which converts low-bit calibration signals into a layer-wise token allocation schedule and materializes it as a pruning recipe. Token importance is evaluated under deployed W4A4 operators with a quantized KV cache by combining activation magnitude, attention cues, and an explicit low-bit risk signal, enabling consistent budgeted top-$k$ selection. Experiments on standard VLM benchmarks show improved robustness over stage-wise baselines under the same low-bit regime, achieving 95.65% average retention while retaining only 30% of visual tokens, compared with about 94.3% retention for representative stage-wise combinations. The code will be released.

Large Language Models (LLMs) are widely used across many domains, but their scale makes deployment challenging. Post-Training Quantization (PTQ) reduces memory footprint without retraining by leveraging a small calibration set. Recent Hessian-based PTQ methods compensate quantization error via cross-channel dependencies, but such approaches degrade at low bit-widths due to noisy curvature estimates from limited calibration data. We propose DASH-Q, a robust PTQ framework using diagonal Hessian approximation and iterative weighted least squares. By discarding noise-prone dependencies, DASH-Q filters sampling noise while prioritizing the preservation of salient feature power. We outperform other PTQ baselines in ultra low-bit regime, improving zero-shot accuracy by 7.01% on average and up to 14.01% over the strongest baselines across five baseline LLM models, while showing robust and stable performance with very small calibration data.

Rotation-based Post-Training Quantization (PTQ) has emerged as a promising solution for mitigating activation outliers in the quantization of Large Language Models (LLMs). Global rotation methods achieve inference efficiency by fusing activation rotations into attention and FFN blocks, but suffer from limited expressivity as they are constrained to use a single learnable rotation matrix across all layers. To tackle this, layer-wise transformation methods emerged, achieving superior accuracy through localized adaptation. However, layer-wise methods cannot fuse activation rotation matrices into weights, requiring online computations and causing significant overhead. In this paper, we propose ReSpinQuant, a quantization framework that resolves such overhead by leveraging offline activation rotation fusion and matching basis using efficient residual subspace rotation. This design reconciles the high expressivity of layer-wise adaptation with only negligible inference overhead. Extensive experiments on W4A4 and W3A3 quantization demonstrate that ReSpinQuant achieves state-of-the-art performance, outperforming global rotation methods and matching the accuracy of computationally expensive layer-wise methods with minimal overhead.

Large language models (LLMs) have shown remarkable performance in various domains, but they are constrained by massive computational and storage costs. Quantization, an effective technique for compressing models to fit resource-limited devices while preserving generative quality, encompasses two primary methods: quantization aware training (QAT) and post-training quantization (PTQ). QAT involves additional retraining or fine-tuning, thus inevitably resulting in high training cost and making it unsuitable for LLMs. Consequently, PTQ has become the research hotspot in recent quantization methods. However, existing PTQ methods usually rely on various complex computation procedures and suffer from considerable performance degradation under low-bit quantization settings. To alleviate the above issues, we propose a simple and effective post-training quantization paradigm for LLMs, named SEPTQ. Specifically, SEPTQ first calculates the importance score for each element in the weight matrix and determines the quantization locations in a static global manner. Then it utilizes the mask matrix which represents the important locations to quantize and update the associated weights column-by-column until the appropriate quantized weight matrix is obtained. Compared with previous methods, SEPTQ simplifies the post-training quantization procedure into only two steps, and considers the effectiveness and efficiency simultaneously. Experimental results on various datasets across a suite of models ranging from millions to billions in different quantization bit-levels demonstrate that SEPTQ significantly outperforms other strong baselines, especially in low-bit quantization scenarios.

Additive quantization enables extreme LLM compression with O(1) lookup-table dequantization, making it attractive for edge deployment. Yet at 2-bit precision, it often fails catastrophically, even with extensive search and finetuning. We show that the dominant bottleneck is codebook initialisation. Greedy sequential initialisation frequently places the model in poor optimisation regions that subsequent beam search and PV-tuning struggle to overcome. We analyse this behaviour through the representational ratio \r{ho} = N/KM, which characterises the relationship between weight groups and codebook capacity, and propose OA-EM, an output-aware EM initialisation method using Hessian-weighted Mahalanobis distance. Across compression rates, search budgets, and three architectures (Llama 3.2 3B, Llama 3.1 8B, Qwen 2.5 3B), OA-EM consistently produces better solutions after PV-tuning and dominates the quality-compute frontier. The severity of the bottleneck scales with \r{ho}: moderate at 3 bpp but extreme at 2 bpp, where poor initialisation can degrade perplexity by orders of magnitude. More broadly, our results highlight the importance of optimisation geometry in compressed model spaces, where initialisation can dominate subsequent search and fine-tuning.

Training LLMs at ultra-low precision remains a formidable challenge. Direct low-bit QAT often suffers from convergence instability and substantial training costs, exacerbated by quantization noise from heavy-tailed outlier channels and error accumulation across layers. To address these issues, we present Bit-by-Bit, a progressive QAT framework with outlier channel splitting. Our approach integrates three key components: (1) block-wise progressive training that reduces precision stage by stage, ensuring stable initialization for low-bit optimization; (2) nested structure of integer quantization grids to enable a "train once, deploy any precision" paradigm, allowing a single model to support multiple bit-widths without retraining; (3) rounding-aware outlier channel splitting, which mitigates quantization error while acting as an identity transform that preserves the quantized outputs. Furthermore, we follow microscaling groups with E4M3 scales, capturing dynamic activation ranges in alignment with OCP/NVIDIA standards. To address the lack of efficient 2-bit kernels, we developed custom operators for both W2A2 and W2A16 configurations, achieving up to 11$\times$ speedup over BF16. Under W2A2 settings, Bit-by-Bit significantly outperforms baselines like BitDistiller and EfficientQAT on both Llama2/3, achieving a loss of only 2.25 WikiText2 PPL compared to full-precision models.

Foundation models have achieved remarkable results in medical image analysis. However, its large network architecture and high computational complexity significantly impact inference speed, limiting its application on terminal medical devices. Quantization, a technique that compresses models into low-bit versions, is a solution to this challenge. In this paper, we propose a post-training quantization algorithm, Permutation-COMQ. It eliminates the need for backpropagation by using simple dot products and rounding operations, thereby removing hyperparameter tuning and simplifying the process. Additionally, we introduce a weight-aware strategy that reorders the weight within each layer to address the accuracy degradation induced by channel-wise scaling during quantization, while preserving channel structure. Experiments demonstrate that our method achieves the best results in 2-bit, 4-bit, and 8-bit quantization.

Ultra low-bit quantization brings substantial efficiency for Transformer-based models, but the accuracy degradation and limited GPU support hinder its wide usage. In this paper, we analyze zero-point distortion in binarization and propose a Binary Weights & Ternary Activations (BWTA) quantization scheme, which projects tiny values to zero and preserves the accuracy of extremely low-bit models. For training, we propose Smooth Multi-Stage Quantization, combining a Levelwise Degradation Strategy and a Magnitude-Alignment Projection Factor to enable stable and fast convergence. For inference, we develop a BWTA MatMul CUDA kernel with instruction-level parallel bit-packing and comprehensive binary/ternary MatMul implementations for both linear and attention operators, allowing seamless integration across Transformer architectures. Experiments show that BWTA approaches full-precision performance for BERT, with an average 3.5% drop on GLUE and less than 2% drop on five tasks, and achieves comparable perplexity and accuracy for LLMs. In efficiency, it delivers 16 to 24 times kernel-level speedup over FP16 on NVIDIA GPUs, and 216 to 330 tokens/s end-to-end prefill speedup with lower memory footprint on LLMs. As an algorithm-hardware co-design, BWTA demonstrates practical, low-latency ultra-low-bit inference without sacrificing model quality.