Object-Centric RL
RL: Reinforcement Learning
Latest papers
8 papers4 papers in the last four weeks, against 1 the four weeks before. 0.0% of all new papers.
Geometric assembly requires fine spatiotemporal coordination to place parts without causing collisions or deadlocks under tight clearances. To address this, we present an object-centric reinforcement learning framework that treats each part as an agent and learns a shared policy for continuous assembly control. A graph neural network represents the pieces, their target poses, and their spatial relationships, and predicts translational and angular velocities for each component. Per-agent proximal policy optimization with a centralized graph critic directly learns motion and temporal coordination within a single feedback policy. We study this formulation through planar Tangram assembly, where pieces must slide and rotate into a given configuration while remaining on the assembly surface. Procedural generation of target configurations and randomized initial arrangements support training and evaluation across diverse assembly problems. Our experiments isolate the roles of relational structure and multi-agent optimization, and compare learned control with sampling-based planning. We demonstrate concurrent assembly in simulation and transfer the policy to sequential execution on a real robot, as our object-centric formulation decouples learned assembly coordination from low-level physical control. Project page: https://tangrambench.org/
Force-Driven Hook Disassembly via Constraint-Aware Object-Centric Reinforcement Learning
The growing volume of end-of-life products has intensified the need for automated disassembly, yet hook-type connections remain challengin: their orientations vary, they deform under load, and their geometry is hidden, so vision alone cannot identify a feasible non-destructive disassembly direction. This work proposes a constraint-aware reinforcement learning framework that infers feasible extraction directions online from contact forces. The policy is trained in a robot-agnostic, object-centric simulation on a simplified peg-in-hole pair and deployed zero-shot on a physical robot, where it transfers to real connections with unseen, multi-stage constraint structures. Because instantaneous contact forces are noisy and locally ambiguous, the policy is coupled with a particle filter belief that provides the policy with temporally integrated directional information and reduces redundant exploratory motion. The approach is validated on four real-world tasks, from peg-in-hole pairs to the inner propeller and front cover of an end-of-life air-conditioning unit. The full method achieves success rates of 100%, 100%, 90%, and 75% with the highest path efficiency on every task, and raises the success rate on the air-conditioning cover from 45% to 75% relative to a policy trained without the belief. These results indicate that force-driven reinforcement learning can enable disassembly without product-specific models or demonstrations.
Reframing Object-Centric Reinforcement Learning: From Absolute to Relative Representations
Object-centric reinforcement learning agents typically receive each object's position in a fixed global frame, even though their decisions usually depend on where objects are relative to one another. These absolute views often fail to capture the local context that is most relevant to the agent's behavior. As a result, an agent must relearn the same response at every location where a configuration can occur, and its performance collapses when the scene is merely shifted. In this work, we propose a shift toward Object-Relative Coordinates fixed to Anchor (ORCA), where entities are described in a relative frame of reference. To operationalize this idea, we introduce Object-Relative inductive-Bias Transformers (ORBiT), a transformer-based architecture for processing anchor-relative inputs in reinforcement learning. Our results suggest these relative representations improve performance for both MLP and transformer agents. Furthermore, we demonstrate that ORBiT outperforms the pixel-based PPO baseline, achieving an aggregate HNS IQM greater than 1.0 over 13 Atari games. ORBiT learns the game of Foosball from scratch, dominating all baselines. In our controlled Tag environment, we further show that ORCA extends to rotations, that ORBiT generalizes to unseen numbers of distractors, and that these gains require a decision-relevant anchor.
JAXtari: High-Throughput and Easy-to-Modify Arcade Learning Environment
The Arcade Learning Environment (ALE) has been a cornerstone of Deep Reinforcement Learning research, providing a standardized benchmark for evaluating general agents. However, its lack of native support for object-extraction and environment modification restricts research into evaluating whether agents learn robust causal models or rely on brittle visual heuristics. Furthermore, the ALE's dependence on CPU-based emulation creates a significant bottleneck in modern GPU-accelerated training pipelines, limiting both experimental scale and iteration frequency. In this work, we introduce JAXtari, an open-source, high-performance reimplementation of Atari 2600 environments. By leveraging massive GPU parallelization, JAXtari allows PPO agents to finish training on 100M environment steps on a single A100-GPU in under an hour. Beyond speed, it provides object-centric observations and a flexible modification system, allowing researchers to, e.g. develop neuro-symbolic methods or discover novel shortcuts and subsequently train and adapt their agents rapidly, sometimes in only minutes.
X-Reset: Scaling Object-Centric Reinforcement Learning via Cross-Embodiment Resets
Reinforcement learning (RL) in simulation can train dexterous manipulation policies without robot demonstrations, but training a single generalist policy with task-agnostic rewards faces a severe exploration problem: approaching, grasping, and reorienting diverse objects with many degrees of freedom is difficult to discover from scratch. Prior works make exploration tractable with high-quality robot demonstrations, per-task reward shaping, or by restricting policies to narrow modes of behavior. We propose X-Reset, a framework that instead resolves exploration with human hand-object demonstrations. Rather than imitating or tracking retargeted human motion, X-Reset kinematically retargets hand-object states to noisy robot states, filters out states that are unstable in simulation, and samples the remainder as resets during RL training with general-purpose object-centric rewards. The resulting policy depends only on object state and goal, with demonstrations entering training through the reset distribution. We show that X-Reset trains generalist policies on 20 objects across three embodiments---a 22-DoF hand on two different arms and a parallel-jaw gripper---and resolves the exploration challenges of RL from scratch. X-Reset scales with the number of training objects, generalizes to unseen objects, can learn from imperfect hand-pose estimates, and transfers behaviors zero-shot from sim-to-real.
GORDON: Graph-based Object-centric Rewards for Decomposition of Long-Horizon Manipulation
Learning long-horizon manipulation skills with reinforcement learning remains challenging due to the complexity of reward design, the limited guidance of sparse rewards, and the high cost of manual subtask annotation. Visual demonstrations can provide supervision for reward learning, but rewards learned from raw pixels can be brittle and sensitive to visual variation, background appearance, and robot motion. In this work, we propose GORDON, a graph-based object-centric reward learning framework that learns dense rewards from action-free video demonstrations. Each visual scene is represented as a graph of detected objects and spatial relations, and a graph neural network is trained in a self-supervised manner to embed these graphs into a task-aligned latent space. To align the representation with semantic task progress, we introduce an activity-aware weighted pooling mechanism that emphasizes task-relevant objects while masking robot-dominated motion. The dense reward is then computed as distances in the learned latent space of the current state to demonstrated goal configurations, providing a measure of task progress. In long-horizon tasks, the temporal profile of this reward reveals stage-wise object-state transitions, enabling automatic subtask discovery without manual segmentation. The discovered segments are then used to train subtask-specific rewards and specialized policies that are composed sequentially. Experiments on seven manipulation tasks on MAGICAL and ManiSkill3 benchmarks show that our object-centric reward improves reinforcement learning in short-horizon settings and enables successful policy learning in complex long-horizon tasks through automatic decomposition, achieving an average success rate of 74.4% across the long-horizon tasks (on average approximately +35 p.p. vs. best learned baseline and approximately +25 p.p. vs. oracle).
Explainable Reinforcement Learning for Adaptive Traffic Signal Control
Reinforcement Learning (RL) has emerged as a powerful paradigm for adaptive traffic signal control. However, in safety-critical infrastructure like traffic control, the opaque, black-box nature of deep RL models poses challenges for transportation agency acceptance, regulatory compliance, operational trust, troubleshooting, and fine-tuning. To bridge this gap between high-performance optimization and human-comprehensible interpretability, this effort introduces a novel, explainable entity centric RL framework for safe and transparent traffic signal control. Rather than processing traffic states through monolithic, flat vectors, the proposed architecture disaggregates real-time intersection observations into distinct, high-dimensional lane entities and phase temporal configurations to inherently preserve the structural topology and geometric configurations of the intersection. Relational dependencies and inter-lane conflicts are dynamically extracted via a dual-stage attention network featuring sequential multi-head cross-attention and self-attention blocks. This design yields a real time affinity matrix that quantifies the direct influence of signal phases on specific approach volumes and queues, providing full visual and analytical interpretability. To ensure strict operational reliability, a deterministic action-masking interface is integrated directly into the Proximal Policy Optimization pipeline, explicitly blocking invalid phase transitions to guarantee absolute compliance with established signal timing and safety constraints. Evaluated in a microscopic simulation environment, outperforms state-of-the-art baselines in delay minimization. More importantly, the emergent attention weights align precisely with established traffic engineering principles, offering an auditable, trust-enabling, and deployable architecture for next-generation adaptive traffic control systems.
Object-Centric Residual RL for Zero-Shot Sim-to-Real VLA Enhancement
Vision-Language-Action (VLA) models can generalize across diverse manipulation tasks, but their imitation-learning-based policies remain brittle in precise physical interactions due to compounding execution errors; Can a reinforcement learning policy trained purely in simulation improve the robustness of real-world VLAs zero-shot? Residual RL, which learns a corrective policy on top of a frozen VLA, offers a natural framework, but existing approaches face a fundamental sim-to-real dilemma: privileged-state methods require lossy distillation for deployment; image-based methods suffer from the visual domain gap; and real-world RL is costly and unsafe. We propose an object-centric residual RL framework that refines VLA actions using object poses, enabling a compact observation space that transfers consistently between simulation and reality. To align the two domains, we additionally replay the same teleoperation demonstrations in simulation to train a sim counterpart of the real-world VLA. The residual RL policy is trained only in simulation with pose noise injection and dropout, and transfers zero-shot to the real robot. Across five manipulation tasks on a real Franka Research 3 (FR3) robot, our method improves the success rate from 42% to 76% zero-shot, and the improved rollouts can be further reused to retrain the base VLA for self-improvement without additional teleoperation. Project page: https://www.microsoft.com/en-us/research/articles/object-centric-residual-rl/