VLM Quantization

Vision-language-action (VLA) policies repeatedly invoke inference to control robots, making graphics processing unit (GPU) energy a recurring cost of task execution. Reducing energy per inference call, however, may not reduce energy per successful task if numerical errors increase failures or slower inference prolongs execution. We therefore target GPU energy per successful task while preserving task success and keeping the inference-latency increase within 10%. Our approach builds on two observations: quantization sensitivity varies across action classes, model layers, and weights versus activations; and numerical precision changes the workload, shifting favorable GPU operating points. We introduce ActTune, an action-aware framework that connects layer-wise precision allocation with workload-dependent GPU operating-point selection over requested frequency--power-cap pairs. A lightweight decision tree learns its splits and leaf precision configurations directly from configuration action errors, then selects precision before each policy call. The controller forecasts the next workload and applies the selected GPU operating point asynchronously using a lookup table calibrated under a latency budget. A shared resident quantized weight bank enables configuration switching without weight reconstruction or additional policy evaluations. On LIBERO, a benchmark for lifelong robot learning, ActTune improves mean task success by up to 2.3% relative to state of the art. Relative to the original BF16 implementations, it delivers up to $2.02\times$ faster inference and, with GPU operating-point adaptation, reduces energy per successful task by up to 76.8%.

Post-training quantization has been shown to preserve VLA performance under standard evaluation conditions, but whether it preserves the full-precision model's robustness and generalization remains underexplored. In this study, we systematically study the robustness and generalization of post-quantized VLA policies under environmental disturbances. Empirical results show that quantized policies can become fragile to subtle environmental variations despite retaining comparable in-distribution performance. We further observe that action discrepancies are concentrated in a small subset of rollout states, while teacher guidance has opposite effects depending on discrepancy: it improves generalization at high-discrepancy states but can degrade it at low-discrepancy states. These findings reveal that effective post-quantization recovery requires selectively intervening on vulnerable states rather than globally distilling the student. We therefore propose Policy-Induced Vulnerability-Oriented Tuning (PIVOT-Q), a vulnerability-aware On-Policy Distillation (OPD) framework that selectively corrects vulnerable states encountered during quantized-student rollouts using the frozen full-precision policy as a teacher. PIVOT-Q identifies vulnerable states using discounted accumulated discrepancies over a short horizon, applies phase-balanced sparse supervision, and uses a Behavioral Anchor to prevent unnecessary changes. Experiments under seven LIBERO-Plus environmental variations demonstrate consistent recovery across multiple VLA backbones and quantization methods. Notably, PIVOT-Q consistently outperforms full-state distillation across all settings while using only 7.4% of its state-level distillation budget. Our code is available at https://github.com/ruanruan-andy/PIVOT-Q.

Post-training quantization (PTQ) lowers deployment cost for multimodal large language models, but calibration typically reconstructs fixed sequences with local objectives. This overlooks autoregressive feedback: a quantization-induced token change redirects the prefix and changes future states. Yet on-policy coverage alone is insufficient because many decision mismatches barely affect future generation. We propose OnPTQ, an on-policy framework that calibrates on trajectories visited by the current quantized policy. On shared prefixes, OnPTQ identifies quantization-eroded boundaries, evaluates competing tokens through short counterfactual rollouts, and combines current discrepancy with branch consequence into a Decision--Consequence risk. The risk prioritizes critical states, while context anchoring and trajectory refresh preserve multimodal behavior and keep calibration aligned with the updated policy. We further derive a Decision--Consequence bound linking behavioral deviation to current policy discrepancy and action-conditioned future-value span. Across vision--language and omni-modal Qwen models under multiple low-bit settings, OnPTQ improves downstream performance and yields fewer correctness flips against the corresponding Dense/FP16 references, without changing the deployed inference graph.

Vision-language navigation (VLN) models perform well but target compute-rich platforms, limiting deployment on memory- and power-constrained robotic edge devices. Compression alone does not establish whether a VLN model fits the memory, latency, and energy budgets of an edge platform while preserving navigation behavior. We introduce EdgeVLN, a runtime-aware, deployment-ready quantized VLN model that closes this gap. EdgeVLN combines a quantized StreamVLN model with Latent Trajectory Termination Extractor (LATTE), a lightweight causal transformer that improves real-time stopping by predicting a Stop Action verifier rank. Both execute through our llama.cpp VLN driver, which reconstructs streaming context and prunes memory tokens on-board. We characterize a pretrained StreamVLN backbone across weight quantization from 8 to 2 bits and multiple inference runtimes to identify a feasible operating point. LATTE reuses backbone hidden states within the budget freed by quantization, requiring neither a second vision encoder nor an additional backbone forward pass. We evaluate six backbone precisions and seven candidate stop heads on BF16 and IQ4 NL across all 1,839 R2R VLN-CE val-unseen episodes. We measure success rate (SR) in simulation and latency, energy, and resident memory on an NVIDIA Jetson Orin NX 16 GB. LATTE achieves our highest SR, 58.02 percent on the deployed 4-bit model, exceeding the BF16 baseline with only 0.013 s additional latency per navigation step. Four-bit formats achieve nearly identical SR, but step energy varies 36.8 times by execution path. Only IQ4 NL under our VLN driver fits the board, using 11.35 GB resident memory while running 20.8 times faster and using 13.3 times less energy than storage-streamed BF16. INT2 collapses. Runtime selection, memory-token pruning, and quantization are essential for efficient edge deployment.

Post-training quantization reduces the deployment cost of vision-language models (VLMs), but preserving multimodal capabilities at low bit widths remains challenging. Existing methods rely on modality- or token-level gradient statistics, which are susceptible to cross-sample variations in visual-to-textual token ratios and the positions of visual information, limiting statistical stability. Moreover, overly coarse aggregation through absolute values and averaging discards gradient signs and channel-wise differences, limiting the separation of modality-specific sensitivities. In contrast, the channel space provides a shared coordinate system across samples, making it a more natural basis for capturing stable task-sensitive structures. We therefore propose SubRot, a signed gradient subspace calibration method for VLM rotation quantization. Through eigendecomposition of the empirical Fisher matrix of activation gradients, SubRot identifies a sensitive channel subspace with three properties: cross-sample stability, clear sensitivity separation, and consistent signed effects on the autoregressive loss along certain directions. Guided by a local Taylor expansion, SubRot combines signed first-order guidance along sign-stable directions with second-order constraints along the remaining sensitive directions, while retaining MSE for overall reconstruction quality. This objective steers quantization errors toward loss-decreasing directions while controlling their magnitude. Experiments on five VLMs across five benchmarks show consistent average-score improvements over FlatQuant under W4A6 and W4A4, reaching 1.4 percentage points on LLaVA-NeXT-7B. Under W4A4, average accuracy degradation from FP16 remains within 1.4 percentage points across all evaluated models, while LLaVA-v1.5-13B exceeds its FP16 average score by 0.4 percentage points.

Vision language models have achieved strong performance across a wide range of multimodal applications, yet their substantial computational and memory costs hinder efficient deployment. Visual token pruning and post-training quantization reduce inference overhead along two complementary dimensions, namely sequence length and numerical precision. Existing workflows typically optimize these techniques independently or apply them sequentially. Their distinct optimization objectives leave critical interactions unaddressed and constrain the achievable compression performance. We revisit these designs and present P4Q, a practical co-design framework that jointly optimizes visual token pruning and low-bit quantization for efficient VLM inference. First, P4Q introduces a quantization-aware visual token selection strategy before the LLM. It applies fake quantization to copies of the features produced by the projector and selects visual tokens using statistics computed from these fake-quantized features, thereby conditioning the selector's feature-based decisions on simulated low-bit perturbations. Second, P4Q introduces a pruning-aware quantization calibration strategy. It uses the same selection strategy as pruning to calibrate the quantized model on the retained-token distribution, thereby aligning the calibration process with the pruned execution path used during deployment. By coupling these two components, P4Q achieves substantial inference speedups while maintaining comparable task performance, resulting in a better efficiency-accuracy trade-off than independently optimized pipelines. For instance, on LLaVA-NeXT, P4Q achieves an average end-to-end inference speedup of 2.8x across eight distinct test sets, while retaining higher accuracy than prior compression and quantization methods.

Post-training quantization (PTQ) enables efficient deployment of large vision-language models (LVLMs), but is typically calibrated on a small set while expected to generalize across diverse downstream tasks. Although recent PTQ methods for LVLMs incorporate sensitivity signals, they still minimize reconstruction loss with respect to the full-precision model, potentially over-preserving FP behavior and calibration-specific bias. Rather than treating quantization solely as an error to be minimized, we observe that it can also provide beneficial regularization for certain layers and modalities. Motivated by this observation, we propose Balanced Fitting, a quantization effect-based framework that balances precision and regularization beyond reconstruction-based optimization. By measuring layer- and component-wise quantization effects for weights, vision activations, and text activations, Balanced Fitting combines fine-grained fitting for sensitive components with coarser fitting to exploit potential regularization benefits. Experiments on multiple LVLMs show that our method consistently outperforms prior PTQ approaches under both weight-only and weight-activation quantization, while lower reconstruction loss does not reliably translate into better downstream performance. The source code is publicly available at https://github.com/kmc3661/BFQ

Post-training quantization of vision--language models (VLMs) is typically assessed through aggregate task accuracy and memory savings, but preserving a headline score does not guarantee preservation of visual grounding behavior. We present GHOST-Q, a cross-precision controlled evaluation of three 8B VLM families under FP16, INT8, and NF4 across utility and hallucination-sensitive benchmarks. Rather than comparing only aggregate accuracy, we pair FP16 and quantized predictions item by-item to quantify how compression redistributes grounding successes and failures. Five of six quantized variants preserve MMStar accuracy within $\pm2$ percentage points, yet 10 of 36 paired effects remain significant after false-discovery-rate correction, nine on hallucination-sensitive conditions. Same-device A100 profiling further demonstrates that substantial memory reduction does not necessarily mean lower inference latency. Finally, an open-ended AMBER audit reveals strong generation budget censoring whose severity varies by architecture and precision. These results show that quantized VLMs should be evaluated jointly for aggregate utility, grounding reliability, generation behavior, and realized deployment efficiency.

Large vision-language models (VLMs) can be efficiently deployed under stringent memory and latency constraints through post training quantization (PTQ). However, most PTQ methods are designed for unimodal large language models (LLMs). These methods treat quantization errors as isotropic perturbations under the Euclidean assumption, which provides weak guidance on directions most sensitive to quantization in VLMs. Consequently, directly adapting unimodal PTQ approaches or solely employing modality-specific scaling often leads to uneven bit-width distribution and inconsistent performance in low-bit settings. To address these challenges, we propose Riemannian Geometry-Sensitive Quantization (RGSQ), which formulates quantization as a reconstruction problem under a unified Fisher-Riemannian metric. RGSQ identifies modality-specific sensitive directions via Riemannian manifold mappings built from modality-partitioned empirical Fisher factors and fused into a modality-aware Kronecker-structured metric. We then apply geometry-aligned rotations to reorient the local tangent frame, steering low-bit perturbations toward loss-insensitive axes. Finally, we apply a whitening transformation that maps the Riemannian objective to an equivalent Euclidean form, enabling standard unimodal PTQ methods to evaluate multimodal quantization error under their original assumptions. Across an extensive and diverse set of mainstream VLM benchmarks, RGSQ achieves the highest accuracy and stability under extremely low-bit settings (W2A8 and W3A8). It outperforms VLM-aware baselines, such as MBQ and MQuant, by up to 5.9% and surpasses single-modality improvements by up to 8.6%.

Recent foundation models are moving toward native multimodal Vision-Language Models (VLMs), making VLMs a central form of next-generation foundation models. However, their large language backbones make edge deployment difficult due to high memory footprint and memory-bound autoregressive decoding. Weight-only post-training quantization is a practical solution, but pushing VLMs to extreme low bit-widths remains challenging: existing rotation-free methods suffer from outliers at 2-3 bits, while rotation-based methods improve accuracy at the cost of additional runtime overhead. We propose SPHQuant, a rotation-free spherical weight-only quantization framework for VLMs. Instead of quantizing weights directly in Cartesian coordinates, SPHQuant decomposes each 8D weight vector into coordinate signs, radius, and a positive unit direction. This representation isolates outlier magnitude into the radius while keeping directions bounded and statistically regular. Based on this insight, SPHQuant allocates extra precision to the radius to mitigate accuracy degradation induced by outliers. It further uses a compact positive-direction codebook and fine-tunes codebook entries through angular parameterization to preserve the unit-sphere constraint. We also design a hardware-friendly GEMV kernel that keeps the direction codebook small enough for shared-memory lookup and packs radial bits efficiently. Experiments show that SPHQuant matches the performance of state-of-the-art extreme low-bit quantization methods while improving decode throughput over QTIP by 30.3% on RTX A6000. Code will be released in https://github.com/Pushazf/SPHQuant.

Low-bit vision-language-action inference must reduce observation-to-action latency while preserving robot behavior. We present FoldQuantVLA, a post-training quantization framework that carries a consistent activation representation through calibration, weight rounding, and native integer execution. It combines channel scaling and block Hadamard transforms with dynamic per-token quantization, without policy retraining. Custom TensorRT plugins execute projections in both the language backbone and iterative action expert with four-bit weights and activations (W4A4) on Ada GPUs and Jetson AGX Orin. Evaluation spans LIBERO, SimplerEnv, and two robot platforms. Across three GR00T checkpoints and $π_{0.5}$, W4A4 achieves $1.20$ to $1.33\times$ speedups over floating-point TensorRT on Orin and $1.25$ to $1.52\times$ on desktop. Retaining language attention-output and feed-forward down projections at eight bits (W8A8) improves held-out action fidelity on all four checkpoints. Across four real-robot tasks, this configuration raises observed GR00T N1.7 success from $80.0\%$ with uniform W4A4 to $92.5\%$ over 80 trials per configuration, with a measured additional Orin latency of 1 ms.

The deployment of Vision-Language Models (VLMs) on edge devices is severely bottlenecked by memory bandwidth, necessitating aggressive sub-8-bit quantization. Since edge accelerators are strictly constrained by area and power, they require end-to-end quantized models. However, the extreme dynamic range gap between multi-modal tokens causes standard block formats to suffer "microscaling collapse," where a single massive outlier hijacks the shared exponent, underflowing surrounding elements and destroying attention maps. To break this bottleneck, we propose Micro-Inverted-Scaling (MiX), a novel format that mathematically inverts the microscaling paradigm: rather than grouping multiple mantissas under one shared exponent, MiX groups private, per-element exponents under a single shared mantissa. To handle asymmetric VLM outlier topologies, we introduce an adaptive dual-format (MiX-MX) inference framework. By algebraically factoring out the shared MiX mantissa, this framework maps to a custom accelerator, replacing multipliers with efficient shifters. Evaluated end-to-end on multiple VLMs, our 4.5-bit MiX formulation exhibits equivalent or superior accuracy on multi-modal benchmarks compared to NVFP4. Simultaneously, the MiX accelerator delivers a 25% improvement in area efficiency over the NVFP4 baseline and a 2.3-4.5x speedup with 1.4-2.9x energy reduction across models compared to the state-of-the-art accelerator Focus, proving the inverted-scaling datapath is physically superior for efficient VLM deployment.

Large-scale vision-language models (VLM) such as CLIP enable strong open-vocabulary reasoning, yet deploying these capabilities on resource-constrained edge devices remains challenging. EdgeVL addresses this problem by distilling CLIP representations into lightweight multi-modal encoders and applying quantization-aware training (QAT) for efficient Open-Vocabulary Classification (OVC) on edge hardware. However, its two-stage optimization applies different objectives for distillation and QAT, and contrastive learning is performed within the quantized student space, which can result in inconsistent optimization and reduced training efficiency. Moreover, identical supervision across RGB and non-RGB modalities may lead to modality imbalance. We propose a unified framework for quantized semantic distillation tailored to edge deployment. By jointly optimizing distillation and quantization within a unified teacher-anchored framework, our method ensures consistent training under quantization, suppressing hard negatives and enlarging decision margins. Additionally, we design a lightweight cross-attention adapter that enhances non-RGB representations through RGB-guided semantic transfer, narrowing the modality gap. Extensive experiments demonstrate consistent improvements on non-RGB modalities while maintaining deployment efficiency.

Vision-language models (VLMs) deployed on consumer hardware must decide when to answer and when to defer, and that decision depends on having a confidence signal that tracks correctness. A practitioner with a fixed memory budget faces a choice between a small model at full precision, the same small model quantized, and a larger model quantized into the same footprint -- three configurations that push the confidence signal in opposing directions. We measure, on identical inputs, how model scale and 4-bit quantization affect two confidence signals in the Qwen2-VL family: the confidence a model states in natural language, and its own mean token probability over the answer it generates. Across 5,700 predictions spanning six realistic photographic degradations at three severities, we find that scale sharply improves the model's internal uncertainty signal (mean error-detection AUROC 0.80 to 0.98 from 2B to 7B) while its verbalized confidence stays weak and often at chance (mean 0.61 to 0.69): the gap between what the model knows and what it says widens rather than closes with size. We find that 4-bit quantization is nearly free for accuracy (-1.6 points) but expensive for the confidence signal (internal AUROC 0.95 to 0.80, and the verbalized-confidence parse rate collapses from 99% to 64%). For a fixed memory budget the recommendation is therefore to prefer a larger quantized model over a smaller full-precision one: 7B-4bit gives both the best accuracy and the best uncertainty signal (internal AUROC 0.98) of the three configurations that fit. We frame the results as selective-prediction operating points so they translate directly into a deployment recommendation, and we argue that error-detection AUROC, not calibration error, is the metric that exposes the difference between the two signals.

Multimodal large language models (MLLMs) require huge memory and computational costs, which limits their practical deployment. Post-training quantization (PTQ) techniques offer an efficient solution for model compression and inference acceleration. Yet, the quantized model faces performance degradation due to outlier channels, which are highly sensitive to quantization and substantially impair activation fidelity and task accuracy. To protect these salient channels during quantization, existing PTQ methods leverage modality- or token-level metrics to guide channel-wise scaling (CWS) of LLM decoders. However, these orthogonal measurements fail to capture channel-wise impacts on task-specific loss, and the misalignment between importance and scaling factors ultimately leads to suboptimal performance. To address this issue, we propose C-PTQ, a unified channel-wise PTQ method that harmonizes task-specific loss perturbation and quantization error. Motivated by second-order derivatives, we design a Fisher-weighted objective as a tractable Hessian approximation, seamlessly injecting task sensitivity into the scaling process. Notably, we achieve state-of-the-art performance without auxiliary modules like LoRA, thereby maintaining high efficiency. Experiments on Qwen2.5VL, InternVL2 and LLaVA-OV across 8 benchmarks demonstrate our effectiveness in both weight-only and weight-activation settings.

Efficient multimodal inference is increasingly constrained not only by model quality or FLOP count, but also by the cost of preserving, moving, routing, caching, and quantizing multimodal representations under latency, memory, and energy constraints. This paper reviews recent advances in efficient vision-language and multimodal large language models, covering visual token compression, video token management, KV-cache optimization, Mixture-of-Experts (MoE) routing, low-bit quantization, edge deployment, and hardware-aware benchmarking. We argue that these techniques cannot be treated as independent optimizations. Visual token compression alters downstream feature distributions and MoE routing decisions, routing behavior affects expert utilization and quantization sensitivity, quantized router logits influence expert assignment, KV-cache policies determine retained multimodal evidence, and hardware constraints often transform computational savings into memory and communication bottlenecks. We organize the literature around these interactions and identify key design trade-offs, including accuracy versus token budget, static versus adaptive compression, sparse routing efficiency versus expert collapse, and low-bit inference versus modality-specific degradation. Finally, we introduce Temporal Routing Consistency as a diagnostic for video MoE models and highlight open research directions in routing-aware compression, cross-modal cache management, hardware-aware co-design, and unified benchmarking for multimodal edge intelligence.

Deploying a vision-language model with full UI understanding on end devices has long been trapped between accuracy and efficiency: on one side is the accuracy bar for OCR, screen understanding, visual question answering, and element grounding; on the other is the strict compute, memory, and power budget of mobile chips. Existing work either trades one for the other, or stops at simulation without real-device validation. We present StepX-Edge, a 0.9B-parameter on-device UI vision-language model that resolves this tension through three-layer co-design of architecture, training, and deployment. Architecturally, UI-aware Layered Visual Encoding (ULVE) and a Progressive Dimensionality Projection (PDP) connector target the extreme aspect ratios and fine-grained perception of screens, while standard full attention throughout ensures native compatibility with mainstream mobile NPU operators. For training, the five-stage StepX-Curriculum framework is designed around our observation of mutual-promotion effects among UI subtasks, so that all four capabilities grow synergistically under a tight parameter budget rather than interfering. For deployment, a module-wise differentiated two-stage PTQ-to-QAT quantization scheme keeps the post-quantization accuracy loss within 1%. StepX-Edge achieves the strongest overall UI understanding among <=1B models, surpassing all 2B-2.3B baselines on ScreenQA (88.76 F1) and Chinese OCRBench v2 (57.25), and matching 1.3B-2.3B general VLMs on RefCOCO (92.0%) and OCRBench v1 (831) with far fewer parameters. After W4A16+KV8 quantization, the model runs stably on Snapdragon 8 Gen5 devices with ~0.84 s TTFT, 98 tok/s decode, and 1.4 GB peak memory. We will open-source the training data, the full training recipe, and the quantization deployment pipeline.

The emergence of vision language models with fewer than 3 billion parameters has accelerated the implementation of on-device multimodal intelligence. However, a detailed understanding of component-wise quantization remains a bottleneck for optimal deployment. This paper presents a systematic evaluation framework for empirically validating five hypotheses across six quantization configurations on the Jetson Orin NX and AGX. By separating the vision encoder, projector, and large language model backbone yields the following results: (1) Quantization sensitivity is governed by the structural paradigm (MoE vs. dense) rather than scale alone, with MoE backbones mitigating INT4 noise where dense backbones degrade; (2) SigLIP encoders incur disproportionate INT8 latency on Jetson Ampere--a deployment-specific encoder-kernel-hardware interaction, not a SigLIP flaw; (3) Although INT4 quantization of LLMs greatly reduces VRAM consumption, it also causes slower token generation due to dequantization overhead; (4) Composite quantization errors are largely additive, except along the modality-alignment path, which is architecture-dependent; (5) The intelligence-per-joule profile varies significantly across platforms owing to memory bandwidth constraints.

Large Vision-Language Models (LVLMs) have achieved remarkable progress in multimodal understanding, yet their enormous parameter scale and cross-modal computation incur substantial memory and latency overhead, severely limiting real-world deployment on resource-constrained devices. Binarization offers an attractive solution by drastically reducing storage and computational costs. However, existing binarization methods neglect the varying importance of weights across different layers and modalities. This causes parameters irrelevant to downstream tasks to be unnecessarily retained, whereas modality-critical weights may not be adequately optimized, resulting in significant performance degradation. To address these challenges, we develop a novel \underline{S}ignificance-\underline{A}ware \underline{B}inarization for \underline{L}arge \underline{V}ision-\underline{L}anguage \underline{M}odels (SAB-LVLM). Specifically, after constructing Hessian matrices for textual and visual inputs, we propose a spatial significance map to distinguish full-precision weights activated under a single modality from those activated across modalities. We then devise a modality-guided integration strategy to obtain the significance-aware binarization map, which measures weight significance across layers and modalities. Subsequently, this binarization map is incorporated into the binarization objective as an error reweighting term, and binarization fitting is performed through an alternating significance-weighted update scheme. Extensive experiments illustrate the superiority of our SAB-LVLM over existing binary PTQ methods under an approximately 1-bit compression constraint. Our code is accessible at https://github.com/LyuQi127/SAB_LVLM.

We propose Mix-QVLA, a task-evidence-aware mixed-precision PTQ framework for VLA models. Mix-QVLA anchors each quantized variant to the full-precision action-token reference decision and evaluates whether quantization preserves task-relevant evidence across key VLA functional boundaries. It computes normalized gradient-weighted task-evidence maps from boundary activations and compares full-precision and quantized maps using evidence-mass and attribution-distribution distortion, capturing changes in both the strength and allocation of decision-supporting evidence. A soft-bottleneck objective aggregates boundary-level degradation into layer-wise sensitivity scores. Mix-QVLA further models sensitivity throughout task execution, capturing phase-dependent shifts in layer importance rather than assuming a fixed sensitivity profile. The resulting evidence- and time-aware scores guide mixed-precision bit allocation under model-size and BitOps budgets. Extensive evaluations on OpenVLA-style policies show that Mix-QVLA improves the accuracy-efficiency trade-off of low-bit VLA deployment. On LIBERO, Mix-QVLA reduces OpenVLA-OFT memory from 15.4 GB to 4.1 GB, retains 96.3 average success compared with 97.1 for the BF16 model, and achieves a 1.52x inference speedup.

Mixture-of-Experts Multimodal Large Language Models (MoE-MLLMs) offer remarkable performance but incur prohibitive GPU memory costs, making compression essential. Among PTQ methods, expert-level mixed-precision quantization has proven effective for MoE-LLMs, yet suffers notable degradation on MoE-MLLMs due to two overlooked biases in expert importance estimation. (1) At the cross-modal level, the numerical dominance of vision tokens causes expert selection frequency to be dominated by vision tokens, masking experts that are critical to the text modality; (2) at the intra-vision level, the large proportion of redundant vision tokens further skew frequency statistics, obscuring experts critical for informative visual content. To bridge gaps, we propose MODE, a modality-decomposed expert-level mixed-precision quantization framework for MoE-MLLMs that decomposes expert selection frequency by modality, filters redundant vision tokens to obtain denoised visual frequency, and further evaluates quantization sensitivity per modality as a complementary signal to frequency-based estimation. These signals are integrated into an Integer Linear Programming formulation to assign per-expert bit-widths under a given budget. Extensive experiments show that MODE is particularly well-suited for MoE-MLLMs, limiting average performance loss to within 2.9% at W3A16, with larger gains at the extreme 2-bit setting.

Vision-Language-Action (VLA) models unify perception, reasoning, and control within a single policy, yet their multi-billion-parameter backbones and diffusion-based action heads make on-device deployment prohibitively expensive. Prior quantization efforts offer only partial solutions, compressing the LLM backbone while leaving the DiT action head at full precision, or resorting to mixed-precision schemes, driven by the belief that uniformly quantizing the action head is inherently unstable. We challenge this assumption with Omega-QVLA, the first training-free post-training quantization framework that compresses both the language backbone and the entire diffusion action head of a VLA model to a uniform W4A4 precision, eliminating the need for mixed-precision allocation. Omega-QVLA combines a composite SVD-Hadamard rotation that equalizes per-channel weight energy while diffusing residual activation outliers with per-step DiT activation scaling quantization that absorbs dynamic-range drift across denoising steps. On LIBERO, Omega-QVLA compresses Pi 0.5 and GR00T N1.5 to W4A4 with 98.0% and 87.8% task success rates, matching or exceeding their FP16 references of 97.1% and 87.0%, while reducing the static memory footprint by 71.3%. Real-world manipulation experiments further confirm smooth, accurate manipulation where prior methods fail. Code is available at https://github.com/UCMP13753/Omega-QVLA.

Deploying Vision-Language Models on resource-constrained hardware typically requires INT8 quantization, but in joint-embedding architectures such as CLIP this introduces a failure mode distinct from quantized CNN classifiers: activation noise accumulated across transformer blocks perturbs the direction of the multimodal embedding, eroding the cosine alignment on which zero-shot retrieval depends. We characterize this as Quantization-Induced Representation Collapse (QIRC) and quantify it on INT8 CLIP ViT-B/32, where the layer-wise noise-to-signal ratio grows from below 10% in shallow blocks to 52% at Layer 11. We propose LRA-EE (Layer-wise Representation-Aware Early Exit), which bypasses noise-saturated deep layers via Spatio-Semantic Aggregation (replacing the immature shallow [CLS] with a global patch-token average), a learned multi-feature gate (confidence, top-2 margin, spatial-activation variance), and Layer-adaptive Confidence Thresholding calibrated to each layer's Information-to-Noise Ratio. On ImageNet-1K zero-shot classification, LRA-EE reduces FLOPs by 13.4% and improves Top-1 accuracy by +2.44%p (58.72% -> 61.16%) over the INT8 baseline. A four-quadrant decomposition isolates the Rescue Effect: 9.5% of samples are correctly classified at shallow exits but lost to noise at full depth, against only 7.1% suffering the inverse.

Vision-Language Models (VLMs) achieve outstanding performance, yet their huge model size severely hinders deployment on edge devices with limited resources. As an efficient model compression technique, vector quantization (VQ) excels in ultra-low-bit representation, which maps model weights to discrete codewords in a compact codebook to cut memory consumption and transmission overhead while preserving model capability. Direct VQ application to VLMs still has two core limitations. First, cross-modality weight distribution differences brought by visual and textual inputs cannot be well fitted by a single unified codebook. Second, current second-order error compensation ignores first-order gradient information, causing weight deviation from pre-trained optimal states, gradient drift and biased compensation results. This work proposes MGVQ, a novel vector quantization framework integrating multi-dimensional sensitivity perception and gradient-Hessian fusion. It consists of two core modules: sensitivity-guided structured mixed-precision quantization dynamically assigns different bit-widths according to channel sensitivity via combined global and local sensitivity analysis for refined resource allocation; gradient-aware second-order error compensation embeds first-order gradients into error correction, and adopts Kronecker and Block-LDL decomposition to ensure low computational cost. Extensive experiments on mainstream VLMs including LLaVA-onevision, InternVL2 and Qwen2-VL verify the effectiveness of MGVQ. In 2-bit quantization settings, MGVQ surpasses existing advanced post-training quantization methods significantly, achieving a maximum accuracy improvement of 4.9 points (71.4% vs 67.0% on InternVL2-26B). The proposed method realizes stable and efficient ultra-low-bit VLM quantization, greatly promoting the practical deployment of multimodal large models in resource-limited environments.

Vision-Language-Action (VLA) models exhibit remarkable action generation for embodied intelligence, but their heavy compute make deployment on edge platforms impractical. Aggressive, sub-4-bit weight quantization is the natural solution, yet existing post-training quantization (PTQ) methods suffer severe performance degradation in this regime. To address this, we introduce ActQuant, an action-guided mixed-precision PTQ framework that operates in two stages: (1) an inter-tensor bit allocator that assigns each weight matrix a single bit-width based on how much it contributes to predicting the agent's actions; (2) an intra-tensor scale optimizer tunes per-block quantization scales using action-aware curvature, so that dynamic range is concentrated on the weights most influential for control. To deliver the on-device benefits of our aggressive quantization, we further introduce OmniModel.cpp, an agentic conversion pipeline that ports architectures into a native C/C++ runtime with efficient low-bit kernels. We evaluate ActQuant both in simulation and on a real-world 6-DoF UR3 arm, with all models deployed through OmniModel.cpp. On the LIBERO benchmark, ActQuant is the only method that operates at or below 3 bits-per-weight, retaining 95.0% on OpenVLA-OFT and 94.8% on $π_{0.5}$. Pushed further, ActQuant reaches 2.5 bpw at 90.1% on OpenVLA-OFT, compressing the backbone from 14.3 GB to 2.7 GB (5.3$\times$). On the physical UR3 arm, $π_{0.5}$ quantized with ActQuant retains the baseline's success rate while reducing the memory footprint by 2.5$\times$.

Low-bit post-training quantization (PTQ) is a pivotal technique for deploying Vision-Language Models (VLMs) on resource-constrained devices. However, existing PTQ methods often degrade VLMs' accuracy due to the heterogeneous activation distributions of text and vision modalities during quantization. We find that this cross-modal heterogeneity is distributed unevenly across channels: a small subset of channels contains most modality-specific outliers, and these outliers typically reside in different channels for each modality. Motivated by this, we propose SplitQ, a channel-Splitting-driven post-training Quantization framework. At its core, SplitQ introduces a novel Modality-specific Outlier Channel Decoupling (MOCD) module that effectively isolates salient modality-specific outlier channels with minimal overhead. To further address the remaining cross-modal distribution discrepancies, we design an Adaptive Cross-Modal Calibration (ACC) module that employs dual lightweight learnable branches to dynamically mitigate modality-induced quantization errors. Extensive experiments on popular VLMs demonstrate that SplitQ significantly outperforms existing approaches across 6 popular multi-modal datasets under all evaluated quantization settings, including W4A8, W4A4, W3A3, and W3A2. Notably, SplitQ preserves 93.5% of FP16 performance under the challenging W3A3 setting (69.5 vs. 74.3), pushing the efficiency frontier for deploying advanced VLMs. Our code is available at https://github.com/EMVision-NK/SplitQ

Recently, video language models (VLMs) have been applied in various fields. However, the visual token sequence of the VLM is too long, which may cause intolerant inference latency and GPU memory usage. Existing methods propose mixed-precision quantization to the key-value (KV) cache in VLMs based on token granularity, which is time-consuming in the search process and hardware inefficient during computation. This paper introduces a novel approach called WindowQuant, which employs window-adaptive mixed-precision quantization to optimize the KV cache. WindowQuant consists of two modules: window-level quantization search and window-level KV cache computation. Window-level quantization search quickly determines the optimal bit-width configuration of the KV cache windows based on the similarity scores between the corresponding visual token windows and the text prompt, maintaining the model accuracy. Furthermore, window-level KV cache computation reorders the KV cache windows before quantization, avoiding the hardware inefficiency caused by mixed-precision quantization in inference computation. Extensive experiments demonstrate that WindowQuant outperforms state-of-the-art VLM models and KV cache quantization methods on various datasets.

Deploying Vision-Language Models (VLMs) under aggressive low-bit inference remains challenging because inference cost is dominated by the long visual-token prefix during prefill and the growing KV cache during autoregressive decoding. Token pruning and low-bit quantization are complementary for reducing these costs, yet naive stage-wise combinations are often brittle due to a mismatch between quantization calibration and pruning execution. We present a collaborative quantization-and-pruning framework that unifies low-bit inference and deterministic visual-token pruning in a single deployable pipeline. The framework introduces the \textbf{Q}uantization \textbf{U}nified \textbf{O}ffline \textbf{T}oken \textbf{A}llocator (\textbf{QUOTA}), which converts low-bit calibration signals into a layer-wise token allocation schedule and materializes it as a pruning recipe. Token importance is evaluated under deployed W4A4 operators with a quantized KV cache by combining activation magnitude, attention cues, and an explicit low-bit risk signal, enabling consistent budgeted top-$k$ selection. Experiments on standard VLM benchmarks show improved robustness over stage-wise baselines under the same low-bit regime, achieving 95.65% average retention while retaining only 30% of visual tokens, compared with about 94.3% retention for representative stage-wise combinations. The code will be released.

Vision-language-action (VLA) models achieve favorable task performance, yet runtime errors in closed-loop execution evolve with alternating updates of actions and observations. Existing VLA quantization methods mainly trade off inference speed and model performance while rarely investigating how quantization alters runtime errors. By comparing error distributions between full-precision and quantized models, we identify distinct evolutionary patterns for the two types of errors: quantization enlarges the variance of translation error distributions and increases their dispersion, whereas the distribution center of rotation errors gradually shifts across execution steps, demonstrating cumulative drift. Motivated by this observation, we rethink the optimal quantization strategy for VLA models and propose \textit{DyQ-VLA}, a runtime-error-aware quantization framework, which dynamically selects activation precision according to execution steps and tracks as well as compensates rotation errors via accumulated quantization residuals. Corresponding operators and runtime adaptation strategies are devised within the framework to enable dynamic-precision execution. Experiments show that \textit{DyQ-VLA} achieves a 1.88 to 1.93 inference speedups while maintaining comparable or higher average task success rates. Moreover, it reduces mean execution steps by 17.7% to 19.8%. Our code is here: https://anonymous.4open.science/r/DyQ-VLA-7F51/.

Vision-Language Models (VLMs) achieve strong multimodal performance but are costly to deploy, and post-training quantization often causes significant accuracy loss. Despite its potential, quantization-aware training for VLMs remains underexplored. We propose GRACE, a framework unifying knowledge distillation and QAT under the Information Bottleneck principle: quantization constrains information capacity while distillation guides what to preserve within this budget. Treating the teacher as a proxy for task-relevant information, we introduce confidence-gated decoupled distillation to filter unreliable supervision, relational centered kernel alignment to transfer visual token structures, and an adaptive controller via Lagrangian relaxation to balance fidelity against capacity constraints. Across extensive benchmarks on LLaVA and Qwen families, our INT4 models consistently outperform FP16 baselines (e.g., LLaVA-1.5-7B: 70.1 vs. 66.8 on SQA; Qwen2-VL-2B: 76.9 vs. 72.6 on MMBench), nearly matching teacher performance. Using real INT4 kernel, we achieve 3$\times$ throughput with 54% memory reduction. This principled framework significantly outperforms existing quantization methods, making GRACE a compelling solution for resource-constrained deployment. Code and data are available at: https://github.com/ForeverBlue816/GRACE.