Reliable altitude estimation with frequency-modulated continuous wave (FMCW) radar altimeters is increasingly a challenge due to in-band interference from modern communication systems. In this paper, we present a temporal convolutional autoencoder (TCAE) that directly processes in-phase and quadrature (IQ) samples to suppress structured interference while preserving signal phase and frequency content for range estimation. The model is trained and initially evaluated within a full radar altimeter simulation chain, then further validated via over-the-air (OTA) experiments using a universal software radio peripheral (USRP)-based testbed. Results show that the TCAE reduces altitude estimation error by more than 85% compared to least mean squares (LMS) adaptive filtering under severe interference conditions, including low signal-to-interference-plus-noise ratio (SINR) and full temporal overlap between interfering and radar signals. Unlike conventional methods, the TCAE maintains phase fidelity and beat structure, enabling accurate range estimation even when interferers occupy more than one-quarter of the radar bandwidth. The implemented TCAE performs mitigation directly on fixed-length IQ windows using a single feed-forward pass and was integrated into the MATLAB/ONNX-based evaluation chain used for both simulation and OTA testing. These findings demonstrate that learned IQ-domain interference mitigation can enhance radar-altimeter resilience under a range of tested interference conditions.
Frequency Modulated Continuous Wave (FMCW) radar systems traditionally rely on Fourier-based methods, such as the Fast Fourier Transform (FFT), to estimate target range and velocity. While computationally efficient, these approaches require storing and processing large blocks of data, which can become a bottleneck in memory-constrained or low-latency applications. In this work, we propose a neuromorphic-inspired signal processing method based on adaptive resonate-and-fire (ARF) neurons formulated as a discrete-time dynamical system. Each neuron dynamically adjusts its internal frequency to match dominant frequency components of the input radar signal, enabling direct estimation of target ranges and velocities without computing the full frequency spectrum. The proposed model operates in a sample-by-sample fashion, resulting in memory requirements that scale with the number of tracked targets rather than the signal length. A feedback mechanism is also introduced to enable multiple neurons to lock on distinct frequency components in multi-target cases. Results on simulated and experimental data demonstrate that the method can successfully track multiple targets. Compared to conventional FFT-based approaches, the proposed method offers reduced memory usage proportional only to the number of tracked targets, making it suitable for resource-constrained and edge-based radar applications.
Frequency Modulated Continuous Wave (FMCW) radar is a promising sensor for aided inertial navigation, due to its robustness in environments that challenge traditional alternatives, such as LiDAR and vision. However, its widespread adoption is hindered by complex, noisy measurements, which make reliable estimation difficult. This manuscript addresses these challenges by analyzing the fundamental measurement relations of FMCW radar sensing and developing a reliable estimator. Noise models are derived by applying first principles to the underlying signal processing of a typical radar sensor. These models guide the design of a factor graph-based estimator, utilizing a first-order approximation for the measurement noise propagation. The approach is first examined through simulation, evaluating the significance of different noise sources, the validity of the first-order approximation, and the state-dependent nature of the covariance expressions. Extensive experiments demonstrate the superior robustness and accuracy of the proposed method across diverse field environments and flight profiles, including beyond the radar's standard operating range. Furthermore, the experiments confirm the insights from the simulation regarding the behavior and performance of different estimator configurations relative to their operating conditions. The evaluation data and estimator implementation are made available at https://github.com/ntnu-arl/rig.
Reference-based adaptive interference cancellation is evaluated for stereo audio recordings corrupted by real train noise and environmental background. The observed signal is modeled as a clean stereo program contaminated by an additive disturbance generated by an external acoustic source through unknown propagation paths. A second stereo recording, representing another filtered observation of the same physical noise source, is used as the reference input of a multi-reference recursive least-squares (RLS) estimator. The estimated train-interference component is subtracted from the noisy audio and followed by a finite-impulse-response low-pass postfilter. Three 74.01 s real audio sequences sampled at 11.025 kHz are processed under identical algorithmic parameters. Since clean ground truth is not available, performance is assessed with no-reference indicators: waveform behavior, Welch spectral estimates, RMS change, and residual normalized correlation with the reference. With 30 taps per reference channel, 15 anti-causal taps, and forgetting factor 0.999, the maximum reference correlation is reduced from 0.386--0.832 before processing to 0.011--0.016 after processing. The corresponding correlation-ratio reduction is approximately 30.6--34.1 dB, while the output RMS decreases by 1.8--4.8 dB depending on section and stereo channel. The results demonstrate that real train interference, including environmental acoustic effects, can be substantially attenuated when a correlated reference recording is available.