Abstract
Frequency Modulated Continuous Wave (FMCW) radar is a promising sensor for aided inertial navigation, due to its robustness in environments that challenge traditional alternatives, such as LiDAR and vision. However, its widespread adoption is hindered by complex, noisy measurements, which make reliable estimation difficult. This manuscript addresses these challenges by analyzing the fundamental measurement relations of FMCW radar sensing and developing a reliable estimator. Noise models are derived by applying first principles to the underlying signal processing of a typical radar sensor. These models guide the design of a factor graph-based estimator, utilizing a first-order approximation for the measurement noise propagation. The approach is first examined through simulation, evaluating the significance of different noise sources, the validity of the first-order approximation, and the state-dependent nature of the covariance expressions. Extensive experiments demonstrate the superior robustness and accuracy of the proposed method across diverse field environments and flight profiles, including beyond the radar's standard operating range. Furthermore, the experiments confirm the insights from the simulation regarding the behavior and performance of different estimator configurations relative to their operating conditions. The evaluation data and estimator implementation are made available at https://github.com/ntnu-arl/rig.
Explore similar work
Mar 14, 2026cs.RO
Millimeter-wave radar enables robust perception in visually degraded environments, yet radar-inertial estimation remains prone to drift: sparse body-frame velocity measurements weakly constrain absolute orientation, leaving IMU biases poorly observable over the short horizons of sliding-window estimators. We propose a tightly coupled, hierarchical radar-inertial factor graph that decouples estimation into a high-rate resetting graph and a persistent global graph. The resetting graph fuses IMU preintegration, radar velocities, and adaptive ZUPT to produce smooth, low-latency odometry for real-time control. The persistent graph maintains a full state (poses, velocities, and biases) via keyframe-based geometric mapping and loop closures. Fully observable biases and their exact covariances are continuously injected from the persistent graph as priors into the resetting graph, anchoring the high-rate estimator against integration drift. Extensive evaluations demonstrate high accuracy and drift-reduced estimation at faster than real-time speeds. Code and datasets will be released upon paper acceptance.
Ali Alridha Abdulkarim, Mikhail Litvinov, Dzmitry Tsetserukou
Aug 4, 2025cs.RO
4D millimeter wave radars (4D radars) are new emerging sensors that provide point clouds of objects with both position and radial velocity measurements. Compared to LiDARs, they are more affordable and reliable sensors for robots' perception under extreme weather conditions. On the other hand, point cloud registration is an essential perception module that provides robot's pose feedback information in applications such as Simultaneous Localization and Mapping (SLAM). Nevertheless, the 4D radar point clouds are sparse and noisy compared to those of LiDAR, and hence we shall confront great challenges in registering the radar point clouds. To address this issue, we propose a point cloud registration framework for 4D radars based on Generalized Method of Moments. The method does not require explicit point-to-point correspondences between the source and target point clouds, which is difficult to compute for sparse 4D radar point clouds. Moreover, we show the consistency of the proposed method. Experiments on both synthetic and real-world datasets show that our approach achieves higher accuracy and robustness than benchmarks, and the accuracy is even comparable to LiDAR-based frameworks.
Xingyi Li, Han Zhang, Ziliang Wang +2
Apr 24, 2026cs.RO
Radar-Inertial Odometry (RIO) based on the Extended Kalman Filter (EKF) relies on accurate extrinsic calibration between the radar and the Inertial Measurement Unit (IMU) and is sensitive to disturbances, as large linearization errors can degrade performance or even cause divergence. To address these limitations, this letter proposes an Equivariant Filter (EqF) for RIO based on a Lie group symmetry that geometrically couples navigation states and IMU biases, extending it to incorporate radar-IMU extrinsic calibration and multi-state constraint updates. This equivariant formulation inherently preserves consistency and enhances robustness, enabling reliable state estimation even under poor or completely wrong initialization of calibration states. Real-world experiments on two different Uncrewed Aerial Vehicles (UAVs) show that the proposed EqF-RIO achieves state-of-the-art accuracy under correct extrinsic calibration and offers improved convergence under large calibration errors, where the conventional EKF-RIO fails. Evaluation code is open-sourced.
Giulio Delama, Jan Michalczyk, Morten Nissov +4