cs.CEDec 16, 2025

Wearable-informed generative digital avatars predict task-conditioned post-stroke locomotion

Authors: Yanning Dai, Chenyu Tang, Ruizhi Zhang, Wenyu Yang, Yilan Zhang, Yuhui Wang, Junliang Chen, Xuhang Chen, 

Organizations: School of Instrumentation and Optoelectronic Engineering, Beihang University, 100191, Beijing, China · Centers of Excellence for Generative AI, King Abdullah University of Science and Technology, 23955, Thuwal, Saudi Arabia · Department of Engineering, University of Cambridge, CB2 1PZ, Cambridge, UK · Center of Excellence on Smart Health (KCSH), King Abdullah University of Science and Technology, 23955, Thuwal, Saudi Arabia · 

Abstract

Dynamic prediction of locomotor capacity after stroke could enable more individualized rehabilitation, yet current assessments largely provide static impairment scores and do not indicate whether patients can perform specific tasks such as slope walking or stair climbing. Here, we present a wearable-informed data-physics hybrid generative framework that reconstructs a stroke survivor's locomotor control from wearable inertial sensing and predicts task-conditioned post-stroke locomotion in new environments. From a single 20 m level-ground walking trial recorded by five IMUs, the framework personalizes a physics-based digital avatar using a healthy-motion prior and hybrid imitation learning, generating dynamically feasible, patient-specific movements for inclined walking and stair negotiation. Across 11 stroke inpatients, predicted postures achieved approximately 95% of the practically attainable accuracy for slope ascent and 80% for stair climbing, respectively, demonstrating reliable task-specific gait prediction. In a multicenter randomized pilot feasibility study (n = 21; 28 days), access to scenario-specific locomotion predictions to support task selection and difficulty titration was associated with larger gains in Fugl-Meyer lower-extremity scores than the control group (mean change 6.0 vs 3.7 points; p < 0.05). These results suggest that wearable-informed generative digital avatars may augment individualized gait rehabilitation planning and provide a pathway toward dynamically personalized post-stroke motor recovery strategies.

Explore similar work

Jul 8, 2026

Generating Personalized Lower-Limb Kinematics Across Walking Speeds Using Subject-Conditioned Diffusion

Personalizing exoskeleton assistance requires user-specific gait data across many locomotor tasks, yet collecting this data demands repeated motion capture sessions that are costly, time-intensive, and especially burdensome for clinical populations. This challenge is most acute across walking speeds, where gait changes substantially and deviates further in clinical gait. This work introduces a subject-conditioned residual diffusion framework that generates personalized lower-limb kinematics at unseen walking speeds from a subject's gait sequence at a single seen speed. Given sagittal-plane hip, knee, and ankle trajectories at a seen speed and a desired unseen speed, the model generates a residual that transforms the seen trajectory into the unseen one, using a transformer denoiser conditioned on the subject's gait and the two speeds through feature-wise linear modulation. Trained only on able-bodied data, the model achieved a mean absolute error (MAE) of 3.4° on held-out able-bodied subjects. Without any stroke-specific fine-tuning, it achieved a 6.0° MAE on out-of-training-distribution stroke subjects, retaining subject identity for clinical gait. The framework reduced the MAE by over 70% relative to supervised feed-forward baselines, and a single seen speed matched the accuracy of four speeds within 0.4°. These results demonstrate that subject-conditioned residual diffusion can synthesize personalized gait across speeds from minimal data, reducing the collection burden for downstream exoskeleton personalization.
Sep 14, 2026

Two-Stage Personalized Gait Phase Estimation in Stroke Survivors During Exoskeleton-Assisted Walking: An Offline Feasibility Study

This study evaluated personalized gait phase estimation for stroke survivors using functional inertial measurement unit (IMU) alignment and two-stage sequential adaptation of models pre-trained on healthy gait. The estimator used signals from a thigh-mounted IMU. Heel force-sensitive resistor measurements provided reference phase labels for offline adaptation and evaluation. Stage 1 established a distillation-regularized participant-specific model, and Stage 2 performed conditional refinement using low-rank adaptation. Long Short-Term Memory (LSTM), Temporal Convolutional Network (TCN), and Transformer models were evaluated in five stroke survivors walking with a powered knee exoskeleton using leave-one-subject-out hyperparameter selection and sequential test-then-adapt Stage 2 replay. Relative to the non-adapted baselines, Stage 1+2 reduced the mean participant-wise phase root mean square error by 84.2%, 77.0%, and 60.7%, respectively. The Transformer achieved the lowest final error (2.90 +- 1.13$% of the gait cycle) and heel-strike timing error (23.7 +- 4.5ms). Policy-specific ablations showed that every-cycle updates generally produced the lowest or near-lowest error, whereas conditional updating reduced the update frequency with small accuracy differences. After personalization, alignment produced model-dependent changes in phase error while preserving or improving heel-strike detection and reducing heel-strike timing error for the LSTM and Transformer. Concurrent embedded tests showed that the TCN and Transformer maintained 100-Hz inference during Stage 2 updates without deadline misses, whereas the LSTM missed the 10-ms deadline in 6.6% of inferences. All updates completed within 0.8s. These results support the offline feasibility and embedded computational timing of the proposed framework for exoskeleton-assisted walking.
Sep 13, 2026

Diffusion-Based Generation of Gait Trajectories

Generation of musculoskeletal gait trajectories conditioned on patient-specific parameters remains a key challenge for wearable robotics and rehabilitation. Assistive systems such as lower-limb exoskeletons require reference trajectories that adapt to individual morphology and therapeutic goals while preserving biomechanical realism. Traditional approaches rely on hand-crafted gait templates or optimization procedures that scale poorly across subjects and walking conditions. In this work, we explore conditional diffusion models for generating lower-limb joint-angle trajectories conditioned on gait parameters such as step length. We compare a baseline transformer diffusion model with a controllable diffusion transformer variant incorporating adaptive normalization and classifier-free guidance. Experiments on a dataset of 4,590 gait cycles show that diffusion models can generate realistic periodic gait trajectories while enabling some controllability variation in gait characteristics, highlighting their potential for personalized gait synthesis in assistive robotics.