Lightweight Test-Time Adaptation for EMG-Based Gesture Recognition
Authors: Nia Touko, Matthew O A Ellis, Cristiano Capone, Alessio Burrello, Elisa Donati, Luca Manneschi
Organizations: School of Computer Science, University of Sheffield, Sheffield, S10 2TN, United Kingdom · Natl. Center for Radiation Protection and Computational Physics, Istituto Superiore di Sanità, 00161 Rome, Italy · Politecnico di Torino, Italy · Institute of Neuroinformatics, University of Zurich and ETH Zurich, Zurich, Switzerland
Abstract
Reliable long-term decoding of gestures from surface electromyography (EMG) is hindered by signal drift caused by electrode displacement, muscle fatigue, and/or posture changes. Although modern models achieve high intra-session accuracy, their performance often degrades substantially across recording sessions. Existing approaches to mitigate this problem typically rely on large training datasets or computationally intensive pipelines that are unsuitable for energy-efficient wearable devices. We propose a lightweight test-time adaptation framework for EMG decoding. The framework includes three complementary adaptation strategies: (i) causal adaptive batch normalization for online statistical alignment, (ii) Gaussian Mixture Model alignment with experience replay to mitigate forgetting, and (iii) meta-learning for rapid few-shot calibration. We evaluate these methods on the multi-session NinaPro DB6 dataset. All approaches substantially improve inter-session robustness relative to a non-adaptive baseline while maintaining low computational overhead. Replay-regularized statistical alignment provides the most stable adaptation under limited data, while meta-learning achieves the highest accuracy when sparse calibration labels are available. Overall, our self-supervised test-time adaptation methods reach up to 82% inter-session accuracy, significantly improving upon prior approaches while maintaining resource-efficient operation. These results demonstrate that lightweight test-time adaptation can enable robust, long-term EMG decoding for wearable or prosthetic applications.
Recognition accuracy obtained during a recording session does not persist when a user puts on the electrodes again after the electrodes had previously been removed. The electrodes may have moved slightly, the skin may be drier or wetter, or the elbow may be positioned differently; these factors all contribute to day-to-day variability and therefore represent a major obstacle to implementing successful pattern-recognition based myoelectric control systems in daily practice. However, simply recalibrating a user's hand for 20 min at every doff/don event is a clearly unrealistic expectation. A montage-agnostic encoder built for cross-user, cross-montage transfer is trained here using data collected during a particular recording session, and then applied to data collected later in a different recording session without adjusting anything, on the ten intact subjects of NinaPro DB6. The performance of this approach is compared to that of a per-user LDA classification pipeline, and to that of two published approaches that only rely on source data collected from the same recording session. Carried unchanged across recording sessions, the encoder retains 0.688 macro-F1 against 0.540 for the per-user pipeline, and, on the per-window metric the published baselines use, sits above both published source-only results, a band of two points that locates the encoder rather than ranking it. Of five label-free test-time adaptations, only feature-statistic alignment improves every subject; batch-normalisation re-estimation, a standard method in the domain-adaptation literature, collapses this architecture entirely. Aligning the encoder's feature statistics to the new session recovers about what a single labelled calibration repetition would.
Reliable estimation of neuromuscular activation is a key enabler for adaptive and personalized control in wearable robotics. However, surface electromyography (EMG) remains difficult to deploy robustly outside laboratory settings due to electrode sensitivity, signal non-stationarity, and strong subject dependence. In this work, we propose an adaptive IMU-to-EMG learning framework that reconstructs continuous muscle activation envelopes from wearable inertial measurements across heterogeneous movement conditions. The approach combines a Transformer encoder with Gaussian Error Gated Linear Units (GEGLU-Transformer) to enhance cross-subject generalization and enable rapid subject-specific personalization. Under a strict leave-one-subject-out (LOSO) protocol on a multi-condition lower-limb biomechanics dataset, the proposed architecture achieves r = 0.706 +/- 0.139 and R^2 = 0.474 +/- 0.208 without subject-specific adaptation. With only 0.5% adaptation data, performance increases to r = 0.761 +/- 0.030 and R^2 = 0.559 +/- 0.047, demonstrating rapid adaptation and early performance saturation. These results support attention-based architectures combined with lightweight adaptation as a practical and scalable alternative to direct EMG sensing for real-world wearable robotic applications.
Surface electromyography provides a practical way to infer human movement intention from wearable muscle recordings, but models trained under a single acquisition setting often lose reliability when the user, session, electrode layout, or gesture protocol changes. This paper proposes AEMG, a self-supervised learning approach designed to extract reusable neuromuscular representations from diverse EMG sources. Eight public gesture datasets are first transformed into a shared signal format to reduce discrepancies in channel configuration, sensor topology, and recording protocol. Instead of relying on fixed-length sliding windows, AEMG identifies contraction events from energy variations and represents them as compact neuromuscular tokens, while ordered token groups describe the coordinated activity of multiple muscles during motion. A spatially and temporally conditioned Transformer is then used to encode these token sequences, preserving information about electrode position, activation timing, and sequential structure. For pre-training, the model constructs a discrete library of contraction prototypes through vector-quantized reconstruction and further learns contextual dependencies by recovering masked neuromuscular tokens from surrounding observations. Experiments under leave-one-subject-out and low-label adaptation settings show that the learned representation improves robustness to unseen users and reduces the amount of calibration data required for gesture recognition. These findings suggest that event-level token modeling offers a scalable route toward adaptable and data-efficient EMG-based motor-intent understanding.