Investigating Target Class Influence on Neural Network Compressibility for Energy-Autonomous Avian Monitoring

Passive acoustic monitoring of tropical biodiversity is bottlenecked by the storage and battery cost of continuously recording soundscapes in which bird vocalisations typically occupy less than 10% of the audio. Autonomous recording units built on low-power microcontrollers (typically ARM Cortex-M with $\leq$256 kB of RAM) address this by triggering only on likely-positive segments, but the on-device options are unsatisfying: coarse frequency-energy triggers such as Goertzel filters flood SD cards with false positives at $\sim$71% precision, whereas neural detectors developed for temperate single-species tasks are either too large to deploy or transfer poorly to species-rich tropical settings. We present DrongoNet, a family of three INT8 CNN detectors sized for this envelope and validated on a 50,000-clip, 1,677-species Southeast Asian tropical dataset (SEABAD). The headline model, DrongoNet-Micro (919 parameters, 6.26 kB, 0.9810 AUC, 98.3% mean recall at τ = 0.35), is a drop-in replacement for the Goertzel trigger used in commodity field recorders: at α = 0.10 tropical prevalence it captures 8 pp more bird vocalisations than Goertzel and extends a 32 GB card from $\sim$28 to $\sim$45 days of monitoring. DrongoNet-Nano (5.09 kB) bounds the ultra-low-flash extreme; DrongoNet-Edge (33.06 kB, 0.9991 AUC) targets Linux SBCs. On SEABAD, Micro matches a retrained TinyChirp CNN-Mel baseline within 0.1 pp AUC at 28$\times$ fewer parameters, confirming that the family is deployment-agnostic across mel-spectrogram bird corpora but requires per-environment retraining. Full INT8 quantisation costs $<$0.12% AUC across all three variants.

Recent progress in the field of TinyML has demonstrated that low-power hardware based on microcontrollers can achieve bird species monitoring in real time based on acoustic sensor data for an entire breeding period on a single battery charge. However, the state of the art on low-power microcontrollers was so far limited to binary classification of a single species. In contrast, real fauna monitoring deployments often target multiple species simultaneously. To address this challenge we develop PolyChirp, an approach combining biological domain expertise, automated dataset curation, neural architecture optimization and novel hardware to achieve multiclass bird species detection in the wild. PolyChirp is based on newly designed tiny multiclass models that leverage recent microcontrollers and hardware acceleration with a neural processing unit (NPU). We evaluate the predictive performance of these models, and we measure their computational performance -- flash footprint, latency, energy consumption -- on common microcontroller hardware. Our results demonstrate that PolyChirp matches or exceeds the TinyChirp architectures retrained under our protocol on single-species detection, and further achieves robust classification of up to 10 species simultaneously (macro F2 up to 0.97), while still fitting the flash, latency and energy budget of a low-power microcontroller sensor. A data-driven front-end redesign additionally makes on-device mel feature extraction 7x to 11x cheaper.

Passive Acoustic Monitoring (PAM) is an efficient and non-invasive method for surveying ecosystems at a reduced cost. Typically, autonomous recorders allow the acquisition of vast bioacoustic datasets which are then analyzed. However, power consumption and data storage are both scarce and limit the duration of acquisition campaigns. To address this issue, we propose a smart PAM system which allows the in-situ analysis of the soundscape by embedding a classifier directly onto an AudioMoth microcontroller. Specifically, we propose an optimized yet simple 1D Convolutional Neural Network (1D-CNN) to classify the raw audio. The model focuses on the specific call of Scopoli Shearwater seabirds (endangered species) and is trained on a real-world dataset with a classification accuracy of 91% (balanced accuracy of 89%). We also propose a process to optimize the model to fit the severe resource constraints of the AudioMoth, achieving a ~10kB RAM memory footprint and 20ms inference time. Finally, we present an open-source tutorial of our model optimization and export strategy which can be used for embedding models beyond the scope of our study. Our modified version of the AudioMoth firmware adds two functions: (F1) which selectively records data when the target species has been detected and (F2) which logs the continuous classification results in real time. This work intends to facilitate the conception of intelligent sensors, enhancing the efficiency and scalability of bioacoustic monitoring campaigns.