Unsupervised Surrogate-Assisted Synthesis of Free-Form Planar Antenna Topologies for IoT Applications
Authors: Khadijeh Askaripour, Adrian Bekasiewicz, Slawomir Koziel
Organizations: Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, Gdansk, Poland · Department of Engineering, Reykjavik University, Reykjavik, Iceland
Design of antenna structures for Internet of Things (IoT) applications is a challenging problem. Contemporary radiators are often subject to a number of electric and/or radiation-related requirements, but also constraints imposed by specifics of IoT systems and/or intended operational environments. Conventional approaches to antenna design typically involve manual development of topology intertwined with its tuning. Although proved useful, the approach is prone to errors and engineering bias. Alternatively, geometries can be generated and optimized without supervision of the designer. The process can be controlled by suitable algorithms to determine and then adjust the antenna geometry according to the specifications. Unfortunately, automatic design of IoT radiators is associated with challenges such as determination of desirable geometries or high optimization cost. In this work, a variable-fidelity framework for performance-oriented development of free-form antennas represented using the generic simulation models is proposed. The method employs a surrogate-assisted classifier capable of identifying a suitable radiator topology from a set of automatically generated (and stored for potential re-use) candidate designs. The obtained geometry is then subject to a bi-stage tuning performed using a gradient-based optimization engine. The presented framework is demonstrated based on six numerical experiments concerning unsupervised development of bandwidth-enhanced patch antennas dedicated to work within 5 GHz to 6 GHz and 6 GHz to 7 GHz bands, respectively. Extensive benchmarks of the method, as well as the generated topologies are also performed.
Development of modern antennas is a cognitive process that intertwines experience-driven determination of topology and tuning of its parameters to fulfill the performance specifications. Alternatively, the task can be formulated as an optimization problem so as to reduce reliance of geometry selection on engineering insight. In this work, a bi-stage framework for automatic generation of antennas is considered. The method determines free-form topology through optimization of interconnections between components (so-called pixels) that constitute the radiator. Here, the process involves global optimization of connections between pixels followed by fine-tuning of the resulting topology using a surrogate-assisted local-search algorithm to fulfill the design re-quirements. The approach has been demonstrated based on two case studies concerning development of broadband and dual-band monopole antennas.
Khadijeh Askaripour, Adrian Bekasiewicz, Slawomir Koziel
Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland · Department of Engineering, Reykjavik University, Menntavegur 1, 102 Reykjavik, Iceland
A machine learning-assisted framework for the inverse design of pixelated millimetre-wave patch antennas targeting the 22--30 GHz band is presented. The antenna surface is represented as a 19x23 binary pixel grid on a Rogers RT/duroid 5880 substrate, where each pixel is either metal or empty, with a continuous electrical path from the feed enforced by design. An initial dataset of approximately 6,000 full-wave CST simulations was collected from structured random pixel patterns, of which only around 40% achieved a resonance with |S11| <= -10 dB anywhere in the band, resulting in an imbalanced dataset. To improve simulation efficiency, an XGBoost binary classifier was trained on this data to distinguish resonant from non-resonant patterns before simulation. Using the classifier as a pre-simulation filter, an additional 4,000 patterns were selected and simulated, raising the overall proportion of resonant designs in the combined 10,000-sample dataset from approximately 40% to 52%. A hybrid CNN-BiLSTM forward surrogate was then trained on this augmented dataset to predict the full complex S11 response across 801 frequency points, using a physics-guided composite loss that explicitly emphasises resonance dip accuracy. Finally, an inverse design model was developed that optimises in a compact 64-dimensional latent space using gradient descent to generate pixel patterns matching a desired S11 specification. The results show good agreement between the surrogate-predicted and CST-simulated |S11| responses for the generated designs and demonstrate the feasibility of automatically designing and reconfiguring antenna structures.
Nadeem Rather, Holger Claussen, Lester Ho
Tyndall National Institute, Dublin, Ireland · University College Cork, Ireland
Full-wave electromagnetic (EM) simulation enables accurate patch-antenna analysis but is computationally expensive for large-scale forward prediction and inverse design. We present a mesh-native, physics-augmented graph-learning framework that treats radiation-pattern prediction as signal reconstruction on an irregular surface mesh. For the forward problem, a GPS graph transformer is trained with Physics-Augmented Intermediate Supervision (PAIS), an auxiliary node-level objective that predicts complex surface currents, the physical intermediate linking geometry to radiation. PAIS improves multiple GNN backbones at no inference-time cost, while shuffled-current and non-physical controls show the gain comes from physical correspondence. Direction-conditioned decoding and a differentiable radiation-integral consistency loss further exploit this structure. On an 80,000-sample CST benchmark, GPS+PAIS reaches MSE 0.17 / PSNR 19.67, generalizes to a PCA split, and transfers zero-shot to canonical patches. For inverse design, surrogate-filtered diffusion beats nearest-neighbor retrieval by 32% relative MSE.