A ROS 2 Wrapper for Florence-2: Multi-Mode Local Vision-Language Inference for Robotic Systems

Industrial demand changes the paradigms of production. Due to smaller batch sizes and more variations in products, companies face a growing challenge to adopt more adaptive production systems. In particular, robot-based automation is usually static and fails to respond to constantly changing processes. Vision-Language-Action (VLA) Models are a promising opportunity to mitigate this challenge by generating robot actions based on the observed system state. However, current research either focuses on large models that cannot be computed on premise, creating compliance and security challenges, or use lab-grade robot hardware that obscures exploitation in real industrial settings. In this work, we adapt Hugging Face's SmolVLA for Universal Robots lightweight robots. Further, we release the open-source repository ROS2SmolVLA that implements an interface for ROS 2 to SmolVLA, and makes it applicable for industrial-grade hardware. By this, we allow a lenient adoption into lab and industrial environments. We validate the functionality of SmolVLA for a Universal Robots UR10e using a pick-and-place task and give implementation guidelines. Our findings support that SmolVLA is a well-suited option for small-sized tasks that need to be computed on premise.

Vision-Language-Action (VLA) models show high robotic manipulation capabilities via a two-stage design: a Vision-Language Model (VLM) stage followed by an Action Diffusion Transformer (ADiT) stage. Since robots must meet strict Service-Level Objectives (SLOs) for safety, VLA inference is inherently latency-critical. Meeting these SLOs requires high-end GPUs, yet weight, cost, and power constraints preclude integrating such GPUs on-robot. Prior works offload VLA inference to edge servers that serve many robots on VLA models. However, current VLA systems lack support for multi-request, multi-model execution on a multi-GPU server under SLOs, while existing serving systems for multi-stage models are optimized for throughput and stage disaggregation across separate GPUs, which are ill-suited for the millisecond-scale stages of VLA models. We design Robion, the first VLA serving and management system for multi-robot, multi-model requests on multi-GPU edge servers that meets SLOs. Our serving engine disaggregates the VLM and ADiT stages within a GPU via two streams, dynamically restricting the SMs on VLM stream so ADiT always finds SMs to run alongside it, and co-locates multiple models by sharing these streams across them, prioritizing requests by least remaining SLO time. Our management engine enables flexible model placements on multi-GPU servers, and integrates an intelligent traffic controller that maximizes per-model batching under the chosen placement while bounding each GPU's load to meet SLOs. For individual models, Robion serves on average 6.7$\times$ and 1.5$\times$ higher robot load within 98% SLO attainment over vLLM-Omni, the most widely used multi-stage serving system, and Monolithic, which runs VLM and ADiT as a single pipeline, respectively. In a large-scale experiment of serving 8 different models on a 4-GPU server, Robion can serve up to 64 robots within 98% SLO attainment.

Vision-language-action (VLA) models commonly adopt an LLM-centric $V \to L \to A$ pathway, processing visual observations and language instructions through a large language model before predicting robot actions. Although effective, this design incurs substantial computation and memory overhead. In this work, we introduce TurboVLA, a compact VLA architecture built on a direct $V + L \to A$ mapping. Instead of using a large language model as the central interface between perception and action, TurboVLA independently encodes visual observations and language instructions, directly exchanges information between them through lightweight bidirectional vision-language interaction, and predicts continuous action chunks with a compact decoder. This simple design directly constructs task-conditioned representations while avoiding the overhead of an LLM-centered execution pathway. On LIBERO, TurboVLA achieves 97.6% average success with only 0.2B parameters, 31.2 ms inference latency, and 0.9 GiB inference VRAM on a consumer-grade RTX 4090. Notably, a 0.4B TurboVLA achieves 88.06% success on RoboTwin 2.0, even matching or outperforming substantially larger VLA policies. These results demonstrate that the simple $V + L \to A$ design of TurboVLA can achieve high performance without requiring an LLM-centric execution pathway, offering a new perspective on how vision, language, and action can be connected for efficient robotic manipulation. Code is available at https://github.com/H-EmbodVis/TurboVLA.