Reconfigurable Intelligent Surfaces (RIS) have the potential to engineer smart radio environments for next-generation millimeter-wave (mmWave) networks. However, the prohibitive computational overhead of Channel State Information (CSI) estimation and the dimensionality explosion inherent in centralized optimization severely hinder practical large-scale deployments. To overcome these bottlenecks, we introduce a per-element CSI-free paradigm powered by a Hierarchical Multi-Agent Reinforcement Learning (HMARL) architecture to control mechanically reconfigurable reflective surfaces. By substituting pilot-based channel estimation for each element of the device with accessible user localization data, our framework leverages spatial intelligence for macro-scale wave propagation management. The control problem is decomposed into a two-tier neural architecture: a high-level controller executes temporally extended, discrete user-to-reflector allocations, while low-level controllers autonomously optimize continuous focal points using Multi-Agent Proximal Policy Optimization (MAPPO) under a Centralized Training with Decentralized Execution (CTDE) scheme. Comprehensive deterministic ray-tracing evaluations in an indoor mmWave scenario demonstrate that this hierarchical framework achieves received signal strength indicator (RSSI) improvements of up to 7.79 dB over centralized Proximal Policy Optimization (PPO) baselines. Furthermore, the system maintains resilient beam-focusing performance under practical sub-meter localization tracking errors for up to four users and two reflector arrays. By eliminating execution-time CSI overhead while preserving high-fidelity signal redirection, this work provides a scalable and cost-effective step toward intelligent indoor wireless environments.
Reconfigurable intelligent surfaces (RISs) modify signal reflections to enhance wireless communication capabilities. Classical RIS phase optimization is highly non convex and challenging in dynamic environments due to high interference and user mobility. Here we propose a hierarchical multi-objective quantum metalearning algorithm that switches among specific quantum paths based on historical success, energy cost, and current data rate. Candidate RIS control directions are arranged as switch paths between quantum neural network layers to minimize inference, and a scoring mechanism selects the top performing paths per layer. Instead of merely storing past successful settings of the RIS and picking the closest match when a new problem is encountered, the algorithm learns how to select and recombine the best parts of different solutions to solve new scenarios. In our model, high-dimensional RIS scenario features are compressed into a quantum state using the tensor product, then superimposed during quantum path selection, significantly improving quantum computational advantage. Results demonstrate efficient performance with enhanced spectral efficiency, convergence rate, and adaptability.
Accurate user equipment (UE) localization is critical for beam management in reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) based sixth-generation (6G) networks, especially if the direct base-station-UE links are unavailable. This paper proposes a beam-domain fingerprint framework that maps the received signal-to-noise ratio (SNR) across a small set of predefined RIS reflection states to the UE azimuth angle and range, without requiring channel state information (CSI). Crucially, we extend the framework to a realistic interference-impaired scenario in which a nearby cross-link interferer (CLI) corrupts the clean SNR fingerprint, yielding a signal-to-interference-plus-noise ratio (SINR) fingerprint; an interference-to-noise ratio (INR)-constrained calibration strategy keeps the interference level physically interpretable. Four machine-learning (ML) regressors are evaluated under both conditions. Simulation results at 28 GHz with a 20x20 RIS show that k-nearest neighbors (KNN) achieves the lowest angle MAE of 0.37 degrees and range MAE of 4 cm under clean conditions, rising to 1.4 degrees and 7.6 cm under interference. A key finding is that interference degrades angle estimation substantially more than range estimation across all models, a consequence of the asymmetric encoding of location information in the beam-domain fingerprint.
Md Tarek Hassan, Dmitry Zelenchuk, Muhammad Ali Babar Abbasi
Intelligent Reflecting Surfaces (IRSs) are a promising technology for enhancing the spectral and energy efficiency of millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. In these systems, accurate channel estimation remains challenging due to the passive nature of IRS elements and the high pilot overhead in large-scale deployments. This paper presents a deep learning-based Multi-Block Attention (MBA) framework for efficient cascaded channel estimation in IRS-assisted mmWave MIMO systems that utilize orthogonal frequency division multiplexing (OFDM). First, we show the optimality of the discrete Fourier transform (DFT) and Hadamard matrices as phase configurations for least squares (LS) estimation. To reduce training overhead, we selectively deactivate IRS elements and compensate for induced feature loss using a two-stage architecture: (i) a Convolutional Attention Network (CAN) for spatial correlation recovery and (ii) a Complex Multi-Convolutional Network (CMN) for noise suppression. The MBA architecture mitigates error propagation through attention-guided feature refinement and denoising. Simulation results indicate that the MBA method reduces pilot overhead by up to 87% compared to the LS estimator. Additionally, at signal-to-noise ratios of 10 dB, our proposed method achieves approximately 51% lower normalized mean squared error (NMSE) than leading methods. It also maintains low computational complexity and adapts effectively to various propagation environments.