Learning Reactive Dexterous Grasping via Hierarchical Task-Space RL Planning and Joint-Space QP Control
Authors: Ho Jae Lee, Yonghyeon Lee, Alexander Alexiev, Tzu-Yuan Lin, Se Hwan Jeon, Sangbae Kim
Abstract
In this work, we propose a hybrid hierarchical control framework for reactive dexterous grasping that explicitly decouples high-level spatial intent from low-level joint execution. We introduce a multi-agent reinforcement learning architecture, specialized into distinct arm and hand agents, that acts as a high-level planner by generating desired task-space velocity commands. These commands are then processed by a GPU-parallelized quadratic programming controller, which translates them into feasible joint velocities while strictly enforcing kinematic limits and collision avoidance. This structural isolation not only accelerates training convergence but also strictly enforces hardware safety. Furthermore, the architecture unlocks zero-shot steerability, allowing system operators to dynamically adjust safety margins and avoid dynamic obstacles without retraining the policy. We extensively validate the proposed framework through a rigorous simulation-to-reality pipeline. Real-world hardware experiments on a 7-DoF arm equipped with a 20-DoF anthropomorphic hand demonstrate highly robust zero-shot transferability for dexterous grasping to a diverse set of unseen objects, highlighting the system's ability to reactively recover from unexpected physical disturbances in unstructured environments.
This work addresses sequentially grasping multiple objects with a single dexterous hand without releasing those already held. Most dexterous grasping methods commit all of the hand's degrees of freedom to a single object, underutilizing its dexterity and leaving no redundancy for subsequent grasps. The proposed solution, MoDex, is a diffusion policy that predicts the next gripper pose directly from observations, conditioned on an opposition space and point cloud. The opposition space condition specifies which fingers participate in the current grasp, enabling the gripper to use only a subset of its available degrees of freedom while reserving the remaining degrees of freedom for subsequent grasps. To facilitate sim-to-real transfer, MoDex is trained in two stages: first through imitation learning on expert demonstrations, and subsequently through reinforcement learning fine-tuning, which consistently improves success rates over the pre-trained policy. We evaluate MoDex in simulation on a MuJoCo-based Franka Emika Panda robot equipped with an Allegro Hand and on the corresponding real-world hardware platform. Across both simulation and real-world experiments, MoDex achieves higher success rates than the evaluated learning-based baselines, improving performance by 2.92-17.92% and 6.67-17.78%, respectively. Project page: https://modex2026.github.io/.
Dexterous manipulation requires planning a grasp configuration suited to the object and task, which is then executed through coordinated multi-finger control. However, specifying grasp plans with dense pose or contact targets for every object and task is impractical. Meanwhile, end-to-end reinforcement learning from task rewards alone lacks controllability, making it difficult for users to intervene when failures occur. To this end, we present GRIT, a two-stage framework that learns dexterous control from sparse taxonomy guidance. GRIT first predicts a taxonomy-based grasp specification from the scene and task context. Conditioned on this sparse command, a policy generates continuous finger motions that accomplish the task while preserving the intended grasp structure. Our result shows that certain grasp taxonomies are more effective for specific object geometries. By leveraging this relationship, GRIT improves generalization to novel objects over baselines and achieves an overall success rate of 87.9%. Moreover, real-world experiments demonstrate controllability, enabling grasp strategies to be adjusted through high-level taxonomy selection based on object geometry and task intent.
Human-like dexterous hands with multiple fingers offer human-level manipulation capabilities but remain difficult to train the control policies that can deploy on real hardware due to contact-rich physics and imperfect actuation. We present a sim-to-real reinforcement learning method that leverages dense tactile feedback combined with joint torque sensing to explicitly regulate physical interactions. To enable effective sim-to-real transfer, we introduce (i) a computationally fast tactile simulation that computes distances between dense virtual tactile units and the object via parallel forward kinematics, providing high-rate, high-resolution touch signals needed by RL; (ii) a current-to-torque calibration that eliminates the need for torque sensors on dexterous hands by mapping motor current to joint torque; and (iii) actuator dynamics modeling with randomization to account for non-ideal torque-speed effects and bridge the actuation gaps. Using an asymmetric actor-critic PPO pipeline, we train policies entirely in simulation and deploy them directly to a five-finger hand. The resulting policies demonstrate two essential human-hand skills: (1) command-based controllable grasp force tracking and (2) reorientation of objects in the hand, both of which are robustly executed without fine-tuning on the robot. By combining tactile and torque in the observation space with scalable sensing and actuation modeling, our system provides a practical solution to achieve reliable dexterous manipulation. To our knowledge, this is the first demonstration of controllable grasping on a multi-finger dexterous hand trained entirely in simulation and transferred zero-shot on real hardware.