AI-Aided Advancements in Autonomous Underwater Vehicle Navigation

Autonomous Underwater Vehicles (AUVs) rely heavily on the fusion of inertial sensors and Doppler velocity logs (DVLs) for navigation. In standard autonomous navigation systems, the DVL measures four beam velocities, thereby enabling the estimation of the AUV velocity vector. However, during real-world missions, the DVL may receive noisy or incomplete beam measurements due to marine obstacles, seabed reflections, or environmental disturbances. Furthermore, some low-cost underwater platforms operate without inertial sensors to reduce system complexity and cost. In such cases, reliable estimation of the AUV velocity vector in real-world missing beam scenarios becomes challenging, leading to degraded navigation solutions. To circumvent these challenges and enable resilient underwater navigation, we propose DVL-DeepONet, a physics-guided deep neural operator framework along with three variants. The proposed models are designed to estimate DVL-based velocity information under multiple operational scenarios, including (i) noise-resilient estimation in coupled inertial/DVL measurements, (ii) DVL-only learning, and (iii) beam measurement recovery. By learning a nonlinear operator that maps temporal inertial/DVL observations directly to vehicle velocity while enforcing DVL measurement physics through a consistency constraint, the proposed approach enables robust velocity estimation even under degraded sensing conditions. The proposed framework is validated using real-world AUV experiments, comprising a cumulative path length of approximately 10,000 m. Experimental results demonstrate that the proposed DVL-DeepONet architectures outperform baseline model-based approaches and learning-based algorithms by 40%.

The Doppler velocity log (DVL) velocity measurements are critical to the accuracy of autonomous underwater vehicle (AUV) navigation solutions and, consequently, to mission success. To ensure accurate measurements, the DVL is commonly calibrated before mission start while the AUV sails on the water surface, receiving global navigation satellite system (GNSS) signals that provide accurate reference measurements. Conventionally, Kalman filter-based approaches are employed during calibration to estimate the scale factor and misalignment errors. However, in certain environments, GNSS signals may be unavailable, rendering conventional calibration impossible and forcing the use of uncalibrated DVL measurements, which degrades navigation performance. To address this limitation, this work proposes information-aided calibration (IAC) with two main contributions: first, improving the accuracy of conventional Kalman filter-based calibration in GNSS-enabled environments, and second, enabling GNSS-free DVL self-calibration. Using real-world AUV datasets, the proposed IAC models achieve up to a 20% average improvement in GNSS-enabled environments and up to a 35% improvement in velocity vector estimation during GNSS-free DVL self-calibration. Overall, the proposed approach improves navigation accuracy, reduces navigation drift, and consequently enhances mission reliability.

Autonomous Underwater Vehicles (AUVs) traditionally rely on complex, heavily engineered pipelines for perception, path planning, and motion control. This paper explores the feasibility of an end-to-end Deep Reinforcement Learning (DRL) approach that maps raw sensor data directly to thruster commands, reducing manual engineering. We propose a hierarchical reinforcement learning (HRL) architecture splitting the problem into two Markov Decision Processes. A High-Level (HL) policy operating at 2Hz processes raw $84 \times 84$ pixel monocular camera frames, stacked $100 \times 100$ pixel forward-looking imaging sonar, and proprioceptive data to generate spatial subgoals. Simultaneously, a Low-Level (LL) policy operating at 10Hz converts these subgoals into thruster commands. The HL policy is trained using Reinforcement Learning from Prior Demonstrations (RLPD) within a modified Sample-Efficient Robotic Reinforcement Learning (SERL) framework, while the LL policy utilizes Soft Actor-Critic (SAC) combined with Hindsight Experience Replay (HER). Evaluated in the high-fidelity HoloOcean simulator, our method demonstrates successful obstacle avoidance, achieving trajectory lengths closely approximating (within 4% to 6% of) an $\text{RRT}^*$ planning baseline. Furthermore, the learned policy exhibits strong robustness to simulated sensor noise and decreased visibility. While the system navigates familiar geometries effectively, experiments reveal generalization limitations when encountering unvisited areas with novel obstacle shapes. Ultimately, this work demonstrates the promise of sample-efficient, end-to-end DRL for underwater navigation using minimal computational hardware.