The Doppler velocity log (DVL) velocity measurements are critical to the accuracy of autonomous underwater vehicle (AUV) navigation solutions and, consequently, to mission success. To ensure accurate measurements, the DVL is commonly calibrated before mission start while the AUV sails on the water surface, receiving global navigation satellite system (GNSS) signals that provide accurate reference measurements. Conventionally, Kalman filter-based approaches are employed during calibration to estimate the scale factor and misalignment errors. However, in certain environments, GNSS signals may be unavailable, rendering conventional calibration impossible and forcing the use of uncalibrated DVL measurements, which degrades navigation performance. To address this limitation, this work proposes information-aided calibration (IAC) with two main contributions: first, improving the accuracy of conventional Kalman filter-based calibration in GNSS-enabled environments, and second, enabling GNSS-free DVL self-calibration. Using real-world AUV datasets, the proposed IAC models achieve up to a 20% average improvement in GNSS-enabled environments and up to a 35% improvement in velocity vector estimation during GNSS-free DVL self-calibration. Overall, the proposed approach improves navigation accuracy, reduces navigation drift, and consequently enhances mission reliability.
Autonomous Underwater Vehicles (AUVs) rely heavily on the fusion of inertial sensors and Doppler velocity logs (DVLs) for navigation. In standard autonomous navigation systems, the DVL measures four beam velocities, thereby enabling the estimation of the AUV velocity vector. However, during real-world missions, the DVL may receive noisy or incomplete beam measurements due to marine obstacles, seabed reflections, or environmental disturbances. Furthermore, some low-cost underwater platforms operate without inertial sensors to reduce system complexity and cost. In such cases, reliable estimation of the AUV velocity vector in real-world missing beam scenarios becomes challenging, leading to degraded navigation solutions. To circumvent these challenges and enable resilient underwater navigation, we propose DVL-DeepONet, a physics-guided deep neural operator framework along with three variants. The proposed models are designed to estimate DVL-based velocity information under multiple operational scenarios, including (i) noise-resilient estimation in coupled inertial/DVL measurements, (ii) DVL-only learning, and (iii) beam measurement recovery. By learning a nonlinear operator that maps temporal inertial/DVL observations directly to vehicle velocity while enforcing DVL measurement physics through a consistency constraint, the proposed approach enables robust velocity estimation even under degraded sensing conditions. The proposed framework is validated using real-world AUV experiments, comprising a cumulative path length of approximately 10,000 m. Experimental results demonstrate that the proposed DVL-DeepONet architectures outperform baseline model-based approaches and learning-based algorithms by 40%.
The calibration of extrinsic parameters and clock offsets between sensors for high-accuracy performance in underwater SLAM systems remains insufficiently explored. Existing methods for Doppler Velocity Log (DVL) calibration are either constrained to specific sensor configurations or rely on oversimplified assumptions, and none jointly estimate translational extrinsics and time offsets. We propose a Unified Iterative Calibration (UIC) framework for general DVL sensor setups, formulated as a Maximum A Posteriori (MAP) estimation with a Gaussian Process (GP) motion prior for high-fidelity motion interpolation. UIC alternates between efficient GP-based motion state updates and gradient-based calibration variable updates, supported by a provably statistically consistent sequential initialization scheme. The proposed UIC can be applied to IMU, cameras and other modalities as co-sensors. We release an open-source DVL-camera calibration toolbox. Beyond underwater applications, several aspects of UIC-such as the integration of GP priors for MAP-based calibration and the design of provably reliable initialization procedures-are broadly applicable to other multi-sensor calibration problems. Finally, simulations and real-world tests validate our approach.
Autonomous Underwater Vehicles (AUVs) navigating without GPS typically fuse inertial measurements with acoustic Doppler Velocity Log (DVL) velocities and pressure-derived depth. Posing the navigation state on a Lie group improves accuracy and consistency. However, state-of-the-art filters based on the Invariant Extended Kalman Filter (IEKF) append the Inertial Measurement Unit (IMU) biases as a Euclidean extension, which breaks the group-affine structure required for exact log-linear error dynamics, causing the reported covariance to degrade alongside the estimate. We apply the Tangent-Group (TG) symmetry, which carries the biases within the geometry of the state space, to derive an Equivariant Filter (EqF) for this system, leaving zero linearization error in the navigation states and second-order error only in the biases. We develop an equivariant output model for the DVL, whose update incurs only third-order linearization error, together with a direct pressure output. Monte Carlo simulations benchmark the TG-EqF against a Two-Frame-Group IEKF and a Multiplicative EKF. The TG-EqF reduces error by 18--25% against both alternatives in each of attitude, velocity, and position. The main benefit is in the covariance it estimates: its Average Normalized Estimation Error Squared (ANEES) stays closer to its nominal value of one than that of the others. Offline analysis on AUV field data corroborates the findings of the simulations, demonstrating reduced position drift.
Arihant Lunawat, Pieter van Goor, Frank Dellaert +1