TouchDrive: Electronics-Free Tactile Sensing Interface for Assistive Grasping

We present FlexiTac, a low-cost, open-source, and scalable piezoresistive tactile sensing solution designed for robotic end-effectors. FlexiTac is a practical "plug-in" module consisting of (i) thin, flexible tactile sensor pads that provide dense tactile signals and (ii) a compact multi-channel readout board that streams synchronized measurements for real-time control and large-scale data collection. FlexiTac pads adopt a sealed three-layer laminate stack (FPC-Velostat-FPC) with electrode patterns directly integrated into flexible printed circuits, substantially improving fabrication throughput and repeatability while maintaining mechanical compliance for deployment on both rigid and soft grippers. The readout electronics use widely available, low-cost components and stream tactile signals to a host computer at 100 Hz via serial communication. Across multiple configurations, including fingertip pads and larger tactile mats, FlexiTac can be mounted on diverse platforms without major mechanical redesign. We further show that FlexiTac supports modern tactile learning pipelines, including 3D visuo-tactile fusion for contact-aware decision making, cross-embodiment skill transfer, and real-to-sim-to-real fine-tuning with GPU-parallel tactile simulation. Our project page is available at https://flexitac.github.io/.

Soft wearable robotic systems have emerged as a promising solution for assisting individuals with reduced hand function. This paper presents SoFiE, a modular soft finger exoskeleton designed to assist index-finger flexion during grasping tasks. The proposed system is primarily fabricated using 3D-printed flexible materials, enabling a lightweight, low-profile, and modular design. Actuation is achieved through a tendon-driven mechanism powered by a compact DC motor, while passive extension is provided by a compliant conductive spring. This element, termed StretchSense, also functions as a proprioceptive sensor by exhibiting resistance changes under deformation. Furthermore, a novel tactile sensing approach, MagSense, is introduced, using a magnet and magnetometer pair embedded in a soft fingertip structure to estimate contact force and object compliance. The system is fully untethered and controlled by an embedded microcontroller. In addition, actuator-level sensing through motor encoder feedback enables estimation of the system state, providing a foundation for safe and adaptive control strategies. Experimental validation demonstrates the capability of the system to provide reliable pose estimation, distinguish between materials with different stiffness, and generate distinct sensor signatures across different grasping tasks. This paper details the design, fabrication, and sensing concepts of the proposed exoskeleton as a proof of concept toward modular, soft, and assistive wearable robotics.

Humans achieve stable and adaptive grasps by seamlessly integrating visual perception and tactile feedback, a capability that remains challenging to replicate in robotic systems. Existing robotic grasping approaches predominantly rely on visual inputs and lack mechanisms for tactile-guided adaptation after contact, limiting robustness and generalization. To address this challenge, we propose a unified visuo-tactile-fusion grasping framework that integrates grasp generation, feasibility prediction, and adaptive refinement. At its core, our method introduces an efficient visuo-tactile representation that tightly fuses object geometry with tactile feedback by associating tactile signals with finger identities. This unified representation supports contact-aware grasp pose generation during planning and tactile-guided refinement after contact, enabling the system to reason about fine-grained finger-object interactions and adjust grasps dynamically. Comprehensive experiments in both simulation and real-world environments demonstrate that our approach significantly enhances grasp success rates and generalization across diverse objects.