Reactive Planning based Control for Mobile Robots in Obstacle-Cluttered Environments

Reactive control can gracefully coordinate the motion of the base and the arm of a mobile manipulator. However, incorporating an accurate representation of the environment to avoid obstacles without involving costly planning remains a challenge. In this work, we present ReMoSPLAT, a reactive controller based on a quadratic program formulation for mobile manipulation that leverages a Gaussian Splat representation for collision avoidance. By integrating additional constraints and costs into the optimisation formulation, a mobile manipulator platform can reach its intended end effector pose while avoiding obstacles, even in cluttered scenes. We investigate the trade-offs of two methods for efficiently calculating robot-obstacle distances, comparing a purely geometric approach with a rasterisation-based approach. Our simulation experiments on both synthetic and real-world scans demonstrate the feasibility of the proposed method, achieving performance comparable to controllers that rely on perfect ground-truth information. We further validate the approach on a real robot platform more details: https://remosplat.github.io

Real-time collision avoidance for robotic manipulators requires fast reactions to unexpected obstacle motion and lookahead to avoid becoming trapped by near-future constraints. Full model predictive control can provide this foresight, but its online cost may grow quickly with horizon length, model fidelity, and the number of active geometric constraints. Conversely, horizon-free reactive methods are computationally efficient but can be short-sighted in dynamic clutter. We present a task-space receding-horizon controller that uses a short contact-consistent rollout to generate a terminal kinematic reference satisfying internal non-penetration constraints, then computes only the first input of a smooth minimum-acceleration transition toward that reference. Starting from a closed-loop inverse-kinematics regulation law, the rollout is performed with an iterative dynamics solver operating on inflated convex robot and obstacle geometries, so that robot-obstacle contacts, dynamic obstacle motion, and self-collisions can shape the terminal reference without requiring full constrained trajectory optimization. We analyze the contact-inactive closed loop and show local exponential task-space regulation under standard regularity assumptions. For contacts activated inside the rollout, we characterize the corresponding discrete updates and bound the effect of moving obstacles on regular operating sets. Simulations on a 40-DOF multi-chain system show that intermediate horizons balance anticipation, responsiveness, and computational cost. Hardware experiments on a 6-DOF platform demonstrate consistent sim-to-real behavior without accurate inertial parameter estimation, and comparisons against dynamic optimization fabrics and model predictive control (MPC) baselines show improved success rates in dynamic clutter while preserving solve times compatible with real-time execution in the tested regimes.

To enable an efficient interaction of non-communicating mobile robots in collision avoidance scenarios, we present a novel combined trajectory planning and prediction algorithm. Inverse optimal control is used to estimate unknown goal states of all robots based on observed past trajectories. Each robot also takes the perspective of other robots in considering self-prediction and solves a joint prediction problem using the estimated goal states. The resulting predictions are then considered for planning. Simulation results of scenarios with 2-8 robots show that the median of the durations until all vehicles reach their goals is 9.8 % faster compared to planning with constant acceleration based estimated goal states. Moreover, the proposed approach never leads to the solver being unable to find a solution to the planning or prediction problem.