Organizations: Department of Mechanical Engineering, The University of Tokyo,Tokyo, Japan. · Department of Mechano Informatics, The University of Tokyo,Tokyo, Japan.
Abstract
Multirotor aerial robots excel at maneuvering in three-dimensional space, and recent advances enable nimble navigation in cluttered and confined environments, especially for small airframes. By contrast, platforms built for high-altitude work tend to be larger to deliver high thrust for stable physical interaction with the environment. However, these conflicting design requirements create a long-standing trade-off between nimble navigation and robust aerial manipulation. Here, we present LEGION units, which are reconfigurable modular aerial robots capable of in-flight self-assembly for cooperative manipulation, drawing inspiration from the self-organized collectives formed by ants. Each unit retains nimble maneuverability while joint-equipped docking interfaces at both ends enable end-to-end self-assembly into a flying manipulator. We show that multiple units autonomously dock in flight; once latched, they maintain a zero-clearance interlock by controlling the contact force and torque, enabling reliable aggregation and articulated motion even outdoors. We further show that self-reconfigurability enables morphological switching between nimble individual flight and collective articulated manipulation, while realizing core in-flight manipulation primitives including pushing, pulling, rotating, grasping, and carrying. LEGION's self-organization enables aerial robots, especially in swarms, to shift from passive observers to active participants in their environment, broadening the scope of aerial physical interaction.
Infrastructure maintenance, contact-based inspection, and emergency response can benefit from aerial vehicles that act as a flying human hand with extreme maneuverability, manipulation, and resiliency (MMR): maneuverability to fly in arbitrary orientations to reach remote and tight locations; manipulation to point sensors, turn valves, and press tools at arbitrary orientations; resiliency to maintain accurate motion and force control despite disturbances from arbitrary directions, such as wind, ground effects, and friction. Realizing MMR on aerial vehicles requires not only omnidirectional flight; it also requires (I) vectoring of maximum thrust in any direction, to maximize capacity for contact-force application and disturbance rejection, (II) global stability, to enable control over any orientation/position, and (III) compact, standard designs that build upon platforms such as quadrotors to inherit technological know-how. No current aerial vehicle simultaneously enables I--III, due to structural and control limitations that constrain actuation. We present MorphQuad: a morphable quadrotor that enjoys MMR. Key to our approach is a hardware and control co-design: on hardware, we independently articulate each of the four rotor systems via two-axis gimbals; on control, we introduce globally-stable control, and energy-optimal thrust allocation that permits inter-rotor thrust cancellations only to avoid downwash interference and gimbal lock. With fully-onboard autonomy, MorphQuad demonstrates multi-revolution rotation while translating or hovering, for pipe inspection and target tracking (maneuverability); valve turning, perching, and object pressing and pushing with human-level strengths (manipulation); and wind rejection from any direction, even directed to a single rotor, and push-pull recovery (resiliency).
Aerial robots are increasingly moving from remote observation toward physical interaction with objects, surfaces, structures, loads, and surrounding flows. This review argues that aerial manipulation cannot be understood as classical manipulation simply mounted on a flying base. Because flying agents remain aloft through continuous momentum and energy exchange with the surrounding medium, support, locomotion, stabilization, and task-directed interaction are intrinsically coupled. Building on broad views of manipulation as intentional environmental regulation through physical interaction, we propose a medium-aware interpretation of aerial manipulation in which interaction may be mediated by contact, by the surrounding fluid, or by both. The review organizes biological and robotic examples into a repertoire of interaction modes and a capability ladder, then develops an actuation-geometric viewpoint in which redundancy induces task-equivalent fibers. Internal motion along these fibers can trade energy for active readiness, aerodynamic promptness, and passive medium coupling. This perspective clarifies why aerial manipulation is difficult, why biological flyers remain broader than robotic systems, and how future platforms may command forces while also shaping how the medium acts back on them.
Aerial manipulation with multirotor platforms enables physical interaction in complex environments, but rotor-induced airflow remains a critical limitation for tasks involving airflow-sensitive targets or surroundings. This paper presents an optimization-based design framework for modular aerial manipulators that jointly considers task wrench feasibility, end-effector placement, and airflow exposure constraints. We first introduce a novel categorization of target-side airflow tolerance and formulate the corresponding exposure requirements as geometric constraints. To efficiently model rotor-induced airflow, we introduce a compact cone-sphere envelope that approximates the spreading structure of a quadrotor's airflow while preserving computational tractability for optimization. Building on this formulation, we propose a reconfiguration optimization that adapts a modular aerial manipulator to diverse task wrench requirements while enforcing both target-side airflow exposure and intra-platform airflow interference constraints. Unlike prior designs that assume a fixed end-effector location, the proposed framework optimizes the end-effector placement together with the platform configuration. Scalability experiments and ablation studies validate the effectiveness of the proposed framework.