Bidirectional thrust grants quadrotors a second equilibrium condition and increased control authority, expanding the envelope of possible aggressive maneuvers and enabling inverted flight, perching, and sensing. Prior geometric control approaches extend differential flatness through Hopf fibration-based attitude representations to support bidirectional thrust, but struggle with actuator saturation and motor reversal delay during inversions, requiring heuristic thrust posture scheduling and waypoint tuning. We propose a learning-based framework that modulates a constant reference trajectory to perform compact, position-constrained quadrotor inversions while remaining compatible with traditional trajectory generation and tracking across flight regimes. Separate policies are trained via reinforcement learning for nominal-to-inverted and inverted-to-nominal transitions. In JAX-based simulation, the proposed method achieves the lowest position deviation and settling time across all evaluated baselines, reducing position root mean square error (RMSE) by 32% and settling time by 57% relative to the strongest optimization-based baseline. Hardware experiments demonstrate successful inversion across multiple yaw configurations with position RMSE below 0.35m, and compatibility with downstream trajectory generation and control through circular flight in both regimes. Additionally, we provide an open-source implementation of the proposed framework.
Autonomous fall recovery is a critical capability for quadrotors operating in real-world environments, where collisions or failures may leave the vehicle resting on the ground in an arbitrary attitude. This problem is challenging because recovery must be achieved under limited onboard sensing, in constrained free space, with ground contact, and in the presence of unknown disturbances. In this letter, we present an RL-based framework for autonomous fall recovery of a quadrotor from arbitrary ground attitudes to stable hover using only lightweight onboard sensors. To address severe partial observability and intermittent sensor invalidity, we train a recurrent policy within an asymmetric actor--critic architecture, leveraging an Incremental Nonlinear Dynamic Inversion (INDI) controller to track the policy output. Combined with high-fidelity simulations of motor response and optical flow, the overall training framework significantly reduces the sim-to-real gap. Simulation ablation studies validate the importance of the main design choices, while real-world experiments demonstrate zero-shot transfer and robust recovery under different initial attitudes, wind disturbances, and additional payloads. These results demonstrate that agile quadrotor fall recovery can be achieved without explicit state estimation using only limited and unreliable onboard sensing.
Deep Reinforcement Learning (DRL) for quadrotor flight control typically relies on Domain Randomization (DR) for sim-to-real transfer, resulting in overly conservative policies that struggle with dynamic disturbances. To overcome this, we propose a novel adaptive control architecture that actively perceives and reacts to instantaneous perturbations. First, we train an optimal outer-loop policy, then replace its reliance on ground-truth disturbance data with a Residual Dynamics Predictor (RDP). The RDP estimates the external forces and moments acting on the aircraft in flight online using only the history of states and control actions. For seamless hardware transfer, we introduce a data-efficient linear calibration bridge and an online thrust correction mechanism that align the simulated latent space with reality using mere seconds of flight data. Real-world validations on a Crazyflie micro-quadrotor demonstrate that our adaptive controller significantly outperforms baselines, maintaining precise trajectory tracking under severe uncertainties including mass variations, asymmetric payloads, and dynamic slung loads
Quadrotors flying in tight formations are severely affected by turbulent aerodynamic interactions, such as downwash, that can cause catastrophic collisions if left unmodeled. To compensate for these effects, we propose a physics-informed residual dynamics learning framework that captures complex aerodynamic interactions while ensuring the joint multi-quadrotor system remains differentially flat. We leverage this preserved flatness to design a computationally efficient feedback linearization controller that is easily tunable with linear control techniques and cancels aerodynamic disturbances via feedforward compensation. Hardware experiments demonstrate our framework reduces average tracking errors by 31% compared to nominal baselines. Crucially, our lightweight approach matches the tracking performance of state-of-the-art nonlinear model predictive control (NMPC) while requiring an order of magnitude less computation. We are the first to show that stable, tight formation flight can be achieved with under 30 seconds of training data and a 5ms loop rate, unlocking high-fidelity aerodynamic compensation for compute-constrained flight stacks.