Organizations: ETH Zurich · University of Liverpool · Harbin Engineering University · University of Ottawa · Shanghai Jiao Tong University · Imperial College London
Abstract
Outdoor robot teams need a shared dense map despite limited overlap, independent reference frames, and uncertain monocular scale. Collaborative dense SLAM systems typically resolve this with depth sensors, which add payload, power, and calibration cost. We present CoMo3R-SLAM, a collaborative monocular dense SLAM system that places learned feed-forward 3D reconstruction priors at the center of the multi-agent problem: their dense pointmaps anchor scale across agents and supply correspondences strong enough to verify inter-agent links geometrically. Each agent tracks and fuses its own keyframes from a single RGB stream, while a coordinator retrieves cross-agent keyframes over the prior's encoder features, verifies them by bidirectional dense pointmap matching, synchronizes the independent similarity gauges in closed form, and refines every keyframe in one unified multi-agent sim(3) graph. Finally, a pose-depth alternation over geometry-aware segments lets inter-agent observations constrain dense structure as well as trajectories. Requiring neither measured depth nor supplied intrinsics, CoMo3R-SLAM attains the lowest trajectory error on three of four Tanks and Temples scenes, and competitive accuracy on Waymo driving sequences, while running at approximately 6-8 FPS on RTX 3080 Ti. A long-horizon traversal, independently captured day and night streams, and teams of up to four agents further map its operating range.
Collaborative photorealistic 3D reconstruction from multiple agents enables rapid large-scale scene capture for virtual production and cooperative multi-robot exploration. While recent 3D Gaussian Splatting (3DGS) SLAM algorithms can generate high-fidelity real-time mapping, most of the existing multi-agent Gaussian SLAM methods still rely on RGB-D sensors to obtain metric depth and simplify cross-agent alignment, which limits the deployment on lightweight, low-cost, or power-constrained robotic platforms. To address this challenge, we propose MAGS-SLAM, the first RGB-only multi-agent 3DGS SLAM framework for collaborative scene reconstruction. Each agent independently builds local monocular Gaussian submaps and transmits compact submap summaries rather than raw observations or dense maps. To facilitate robust collaboration in the presence of monocular scale ambiguity, our framework integrates compact submap communication, geometry- and appearance-aware loop verification, and occupancy-aware Gaussian fusion, enabling coherent global reconstruction without active depth sensors. We further introduce ReplicaMultiagent Plus benchmark for evaluating collaborative Gaussian SLAM. Intensive experiments on synthetic and real-world datasets show that MAGS-SLAM achieves competitive tracking accuracy and comparable or superior rendering quality to state-of-the-art RGB-D collaborative Gaussian SLAM methods while relying only RGB images.
SLAM methods based on 3D Gaussian Splatting (3DGS) have demonstrated impressive tracking and mapping performance, but typically require additional geometric information from external depth sensors. Meanwhile, recent SLAM systems that leverage geometric priors from pre-trained feed-forward models enable real-time dense reconstruction, yet often discard original RGB information during optimization, thus degrading overall reconstruction quality. We present GeoGS-SLAM, an online monocular dense reconstruction system that combines the 3DGS-based map representation with learned geometric priors. Given uncalibrated RGB input, we first employ a feed-forward visual geometry model to predict camera and scene priors. The Gaussian scene map is then expanded by directly sampling Gaussian primitives from both RGB input and geometric priors. Camera poses and the scene map are jointly optimized through a coarse-to-fine strategy that minimizes both photometric and geometric losses. To ensure global consistency, we further incorporate online loop closure detection and pose graph optimization. Extensive experiments across indoor and outdoor benchmarks demonstrate that GeoGS-SLAM achieves superior rendering quality and tracking accuracy compared to state-of-the-art methods while maintaining online real-time performance. Project page: https://rlgao.github.io/geogs_slam.
Gaussian splatting has recently gained traction as a compelling map representation for SLAM systems, enabling dense and photo-realistic scene modeling. However, its application to monocular SLAM remains challenging due to the lack of reliable geometric cues from monocular input. Without geometric supervision, mapping or tracking could fall in local-minima, resulting in structural degeneracies and inaccuracies. To address this challenge, we propose GaussianFlow SLAM, a monocular 3DGS-SLAM that leverages optical flow as a geometry-aware cue to guide the optimization of both the scene structure and camera poses. By encouraging the projected motion of Gaussians, termed GaussianFlow, to align with the optical flow, our method introduces consistent structural cues to regularize both map reconstruction and pose estimation. Furthermore, we introduce normalized error-based densification and pruning modules to refine inactive and unstable Gaussians, thereby contributing to improved map quality and pose accuracy. Experiments conducted on public datasets demonstrate that our method achieves superior rendering quality and tracking accuracy compared with state-of-the-art algorithms. The source code is available at: https://github.com/url-kaist/gaussianflow-slam.