On the Generalization in Topology Optimization via Sensitivity-Conditioned Bernoulli Flow Matching

Topology optimisation (TO) often requires repeated finite element analysis and sensitivity-based material updates, which can be costly when multiple candidate designs are needed under varying physical and design conditions. Generative TO offers a route to rapid design exploration, but existing models may rely on adversarial training, long reverse-diffusion sampling, or external guidance to maintain structural feasibility and physical consistency. This study develops a flow matching-based topology optimisation (FMTO) framework for conditional topology generation. Linear FMTO is first formulated as an endpoint-based baseline by interpolating between a Gaussian source field and the BESO reference topology. To introduce mechanically meaningful intermediate states, a trajectory-aware FMTO formulation is proposed, where volume-fraction-indexed BESO states are used to construct the probability path and target velocity field. This incorporates physics-guided optimisation history into generative flow learning without adding inference-time optimisation. A path--velocity mismatch analysis explains why moderate trajectory weighting can improve generation stability, whereas excessive guidance may over-constrain the learned transport. Numerical examples show that FMTO generates diverse topology candidates with improved compliance-related performance, volume-fraction satisfaction, topology fidelity, and substantially fewer sampling steps than a diffusion-based baseline. Under limited training data, trajectory-aware FMTO achieves the best overall performance with a moderate trajectory weight. Studies on trajectory-anchor density and three-dimensional topology generation further demonstrate the influence of path design and the applicability of the proposed framework beyond two-dimensional problems.

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

Natural load-bearing patterns such as leaf venation, trabecular bone, and spider webs achieve high stiffness per unit mass, yet classical topology optimizers rarely reach such geometries, and few let engineers express structural design intent through natural language. This work treats a frozen text-to-image diffusion model as a training-free source of design knowledge and distills it into the physics loop of density-based topology optimization via score distillation sampling, so that a text prompt becomes an explicit, machine-interpretable representation of engineer intent. The prompt-induced generative gradient and the finite element sensitivity are combined at every iteration, letting physics decide which prompt-induced features survive. In 245 primary SDS runs spanning four geometric domains and two physics regimes, 38 of 49 prompt--domain combinations achieved statistically significant compliance reductions (up to $-31.5\%$ mechanical and $-23.0\%$ thermoelastic), outperforming gradient-based baselines. Cross-domain morphological analysis identifies a recurring structural signature of improvement: in most domains the generative prior suppresses dead-end branches in the rib skeleton, with endpoint--compliance correlation $r = +0.56$ to $+0.99$. A Heaviside projection with $\beta$-continuation resolves a pronounced intermediate-density tendency in this diffusion--physics coupling ($42.6\%$ to $<3\%$), and an automated skeleton-based pipeline converts optimized density fields into \rev{candidate geometry ready for computer-aided design. By retargeting the generative prior across domains, loading conditions, and physics objectives through a change of text prompt, with each new problem's physics setup specified separately, the framework uses a pretrained generative model as a reusable, training-free prior for engineering design.