A Simulation Platform for Flapping-Wing Vehicles

The initial development phase of UAV swarms largely depends on simulation for experimental design and validation, yet existing open-source tools are often unmaintained, have steep learning curves, or are built around a single fixed scenario. The need for a comprehensive, modular simulation platform is a recognized research gap. This paper presents SwarmFly, a MATLAB-based simulation and test platform for multi- UAV swarms that addresses these gaps. SwarmFly combines a real-time operational map, four swarm coordination modes (leader-follower, decentralized, heterogeneous relay, and heterogeneous speed), simulated IMU telemetry, and IP-based geolocation with a plugin architecture that lets researchers add behaviors, fault models, and analysis tools without touching the core code. Eight bundled plugins extend the base simulator into a full test harness. The SwarmFly platform exposes multi-agent aerial swarms to a wide range of internal and external disruptions, enabling observation and quantification of underlying swarm control and behavioral mechanisms. This study verifies and characterizes each subsystem through eight experiments that measure formation accuracy, wind tolerance, fault recovery, energy endurance, and airspace compliance. The platform runs entirely in MATLAB. Its modular design supports straightforward extension toward hardware-in-the-loop testing, larger swarms, and higher-fidelity dynamics. An open-source release is available at [https://github.com/abhishekphadke/SwarmFly.git]

Tailless flapping-wing micro-aerial vehicles (FWMAVs) mimic the impressive flight performance of hummingbirds, utilising unsteady aerodynamic effects. However, existing designs are still limited and purpose-built with a restricted flight envelope and poor endurance. We therefore propose an adaptable tiltwing framework enabling bioinspired aerial robots to switch between hovering flight, high-speed directional flight, and energy-efficient gliding flight. The proposed framework utilises thrust vectoring with a wide actuation range via two fully independent propulsion units, each flapping a single wing, for effective control and enhanced manoeuvrability. For this, we developed a hybrid Scotch-yoke-based flapping mechanism that ensures a symmetric motion profile with a modular design guaranteeing an arbitrarily wide flapping angle to exploit the lift-enhancing clap-and-fling effect. Additionally, we implemented a passive wing-rotation mechanism, which, in combination with our dual-wing thrust-vectoring approach, allows unprecedented wing-design freedom, unlocking potential for precise optimisation. A contactless leading-edge tracking sensor provides accurate feedback on the wing's orientation and, in the gliding mode, enables dihedral-angle control, augmenting the active wing-pitch control. Extensive testing of a propulsion unit was conducted with a six-axis force/torque sensor, demonstrating the flapping mechanism's performance while optimising transmission efficiency and the passive wing-pitch mechanism. At full throttle, the average lift force generated by a single wing, flapping with a 188° amplitude, was 21.1 gf for a small 3.1 g 1S BLDC motor. Additional tests covering the full range of the wide-angle tilting capability showed an effective thrust-vectoring control architecture with a linear and symmetric response curve of the moments generated.

High-quality, large-scale synthetic data from simulations is becoming a cornerstone for pushing the capabilities of robot algorithms. While aerial robotics simulators have evolved to support specialized needs such as fidelity, differentiability, and swarms independently, a unified platform that can synthesize data across all these domains is missing. In this work, we propose Crazyflow, a simulator designed to push the limits of aerial-robotics algorithm development, from model-based to data-driven methods, gradient-based to sampling-based approaches, and single-agent to multi-agent systems. Compared to existing state-of-the-art drone simulators, it achieves speeds more than an order of magnitude faster for a single drone and can simulate thousands of swarms of 4000 drones each. Real-world experiments show Crazyflow supports both analytical-gradient-based policy learning, achieving sub-centimeter trajectory tracking accuracy without domain randomization, and sampling-based obstacle avoidance at speeds exceeding half a billion steps per second. Breaking the traditional train-then-deploy paradigm, we show that its unprecedented speed even enables in-flight reinforcement learning; we demonstrate this by throwing a physical drone into the air and training a recovery policy from scratch in 0.38 seconds, successfully stabilizing the drone. Crazyflow supports multiple levels of simulation abstraction, is directly compatible with all open-source Crazyflie models, and enables rapid reconfiguration across custom drone platforms and applications by providing a light-weight system identification pipeline. By pushing accuracy, speed, and differentiability simultaneously, Crazyflow serves as an open-source resource for synthetic data generation, with emerging capabilities for large-scale parallelization for online, in-execution learning and optimization, opening the door to novel algorithm development.