VOLT: Vision and Language Trajectory Segmentation for Faster-than-Demonstration Policies
Authors: Robert Ramirez Sanchez, Daniel J. Evans, Dylan P. Losey, Siddarth Jain
Organizations: Collab, Dept. of Mechanical Engineering, Virginia Tech, Blacksburg, VA · Mitsubishi Electric Research Laboratories (MERL), Cambridge, MA
Abstract
Humans often take longer to demonstrate a task than a robot would need to execute it. Rather than learning to replicate the demonstration at the same pace, many industrial and practical applications require robots to perform tasks as quickly as possible. In this paper, we investigate several hypotheses for learning policies that operate faster-than-demonstrations. Our experiments show that the most effective strategy is to downsample recorded demonstrations and train the robot's policy on this accelerated data. However, uniformly downsampling an entire trajectory can be problematic. Some parts of a task can be safely sped up (e.g., unconstrained motion), while others demand slower, more precise motion (e.g., object interactions or fine manipulation). To address this challenge, we introduce VOLT, a vision-and-language trajectory segmentation method that reasons over video demonstrations, and leverages contextual cues to determine when acceleration is appropriate and when careful precision is required. VOLT identifies segments where slow, deliberate motion is necessary, then selectively downsamples the remaining segments. The resulting reformatted trajectories can be used with standard imitation learning approaches, such as diffusion policies. Our results highlight that segmentation quality is critical -- baseline methods often misidentify when acceleration is possible, leading to overly cautious or unreliable policies. Compared to state-of-the-art alternatives, VOLT allows robots to execute tasks faster while maintaining strong performance.
Robot manipulation alternates between low-risk transit phases that call for fast execution and high-risk contact stages that demand slow, precise motion. Yet existing Vision-Language-Action models (VLAs) only inherit a single fixed speed from training demonstrations. Prior efforts to accelerate VLAs through model compression, KV-cache reuse, or reinforcement learning only shift the policy from one fixed speed to another, and leave deceleration almost unexplored. We observe that the magnitude of each predicted action already governs how fast the robot moves, opening a direct route to controllable execution speed. We turn this observation into TempoVLA, a single VLA whose execution speed is controlled by an explicit condition. TempoVLA combines two coupled components. (1) A data-side Variable-Speed Trajectory Augmentation (VSTA) that re-times demonstration to any target speed by merging or splitting actions while preserving its motion semantics. (2) A model-side conditioning mechanism that feeds the speed to the policy. Statistics show that VSTA reaches the requested speed with negligible motion error. Experiments in simulation and on real-world tasks demonstrate that TempoVLA achieves flexible speed control in both directions, while VSTA additionally boosts the default 1× performance via better data utilization. Furthermore, by cooperating with a large multimodal model, TempoVLA realizes dynamic speed control, accelerating through low-risk phases and decelerating for high-risk ones.
Scaling robot policy learning is bottlenecked by the cost of collecting demonstrations, while language annotations for existing demonstrations are comparatively cheap. We study language density as a lever for extracting more signal from a fixed robot or egocentric-video corpus. We introduce DeMiAn (Dense Multi-aspect Annotation), a two-stage approach that first re-labels demonstration segments with VLM-generated annotations along four complementary aspects: physical motion, scene composition, arm pose, and reasoning. A learned instructor then maps a task description and initial scene snapshot to a task-appropriate annotation at deployment, running asynchronously so generation latency is hidden behind policy execution. Across over 1M robot manipulation clips and 50K EgoVerse human-egocentric videos, DeMiAn improves both a vision-language-action policy and a video-based world-action model without collecting new demonstrations. On RoboCasa, the instructor raises success by 5 points over a task-only baseline and comes within 3 points of a per-task oracle. No fixed annotation aspect dominates across tasks, showing that selecting the right dense language matters. DeMiAn also improves composite-task and out-of-distribution performance, and shifts the compute-performance frontier in both mid-training and post-training after accounting for annotation-generation FLOPs. These results position dense re-annotation as a practical scaling lever for robot policy learning.
Different stages of manipulation tasks exhibit varying levels of difficulty, suggesting stage-dependent motion speeds and temporal prediction horizons. However, existing IL-based visuomotor policies typically imitate the execution speed of expert demonstrations and operate with a fixed temporal prediction horizon, limiting flexibility and overall task throughput. In this paper, we introduce AutoSpeed, a model-agnostic learning framework that enables existing visuomotor policies to predict trajectories with stage-adaptive motion speeds, without requiring speed or stage annotations. We treat future trajectories at different speeds as candidate optimization targets, evaluate each candidate using a composite cost that trades off prediction error against prediction horizon, and optimize the policy toward the minimum-cost candidate. With a fixed-length action sequence, speed modulation adjusts the effective temporal prediction horizon: simple stages are executed faster with a longer prediction horizon, whereas complex stages are executed more slowly with a shorter prediction horizon. Specifically, we implement speed modulation in the frequency domain via the discrete cosine transform (DCT), which enables smooth, non-integer speed scaling and thus preserves motion continuity. Extensive evaluations show that AutoSpeed substantially reduces task execution time while also improving success rates. Under the AutoSpeed framework, the inferred motion speeds exhibit a strong correspondence with task stages.