From Pixels to Newtons: Predicting In Vivo Joint Contact Forces from Monocular Video

Jessy Lauer

cs.CVJun 4, 2026

From Pixels to Newtons: Predicting In Vivo Joint Contact Forces from Monocular Video

Authors: Jessy Lauer

Abstract

Joint contact forces govern implant longevity, cartilage health, and rehabilitation outcomes, shaping who develops osteoarthritis, who recovers well from joint replacement, and who benefits from biomechanical interventions. Yet they remain measurable only invasively, in a few dozen patients with instrumented implants. I present a physics-free pipeline to predict instantaneous 3D hip and knee contact forces from an uncalibrated monocular video: no markers, force plates, electromyography, subject-specific imaging, or musculoskeletal model. Parametric body meshes are recovered per frame, encoded as kinematic features, and decoded into forces by a transformer whose pose stream is adaptively modulated at every layer by body shape, joint, side, activity text, and self-supervised video tokens (V-JEPA 2), unifying hip and knee in a single model. Under leave-one-subject-out cross-validation across 26 patients and 25 activity categories from the in vivo OrthoLoad database, the pipeline matches the accuracy of subject-specific musculoskeletal simulations ( $0.32 \pm 0.08$ BW RMSE for hip; $0.23 \pm 0.03$ BW for knee) and resolves peak force changes smaller than those reported for gait retraining and osteoarthritis progression. Applied zero-shot to an independent instrumented cohort, it rivals or outperforms prior published methods. Even without curated activity labels, video features alone preserve accuracy and enable end-to-end inference on raw footage. Driven by the predictor, a generative motion prior produces biomechanically plausible variants with reduced peak loading, rediscovering strategies from the predictive simulation literature. This pipeline establishes uncalibrated monocular video as a viable modality for estimating joint loading, opening a path toward retrospective analysis of archived clinical recordings, primary-care screening, and at-home rehabilitation tracking.

Explore similar work

Nov 24, 2025cs.CV

MonoMSK: Monocular 3D Musculoskeletal Dynamics Estimation

Reconstructing biomechanically realistic 3D human motion - recovering both kinematics (motion) and kinetics (forces) - is a critical challenge. While marker-based systems are lab-bound and slow, popular monocular methods use oversimplified, anatomically inaccurate models (e.g., SMPL) and ignore physics, fundamentally limiting their biomechanical fidelity. In this work, we introduce MonoMSK, a hybrid framework that bridges data-driven learning and physics-based simulation for biomechanically realistic 3D human motion estimation from monocular video. MonoMSK jointly recovers both kinematics (motions) and kinetics (forces and torques) through an anatomically accurate musculoskeletal model. By integrating transformer-based inverse dynamics with differentiable forward kinematics and dynamics layers governed by ODE-based simulation, MonoMSK establishes a physics-regulated inverse-forward loop that enforces biomechanical causality and physical plausibility. A novel forward-inverse consistency loss further aligns motion reconstruction with the underlying kinetic reasoning. Experiments on BML-MoVi, BEDLAM, and OpenCap show that MonoMSK significantly outperforms state-of-the-art methods in kinematic accuracy, while for the first time enabling precise monocular kinetics estimation.

Farnoosh Koleini, Hongfei Xue, Ahmed Helmy +1

Biomechanics Inverse Kinematics

Ask PDF

May 24, 2026cs.LG

Gait2Hip-60: A Unified Deep Learning Benchmark for Predicting Hip Muscle Forces and Joint Moments from Multi-Cadence Gait Kinematics

Estimating hip muscle forces and joint moments during gait typically relies on musculoskeletal simulation, which is informative but time-consuming and difficult to apply in clinical settings. This study developed a deep learning framework to predict these hip dynamics parameters directly from lower-limb gait kinematics and compared three representative sequence models under a unified protocol. Gait data were collected from 60 healthy adults under three metronome-guided cadence conditions. Ten bilateral lower-limb joint angles were used as inputs, and OpenSim-derived hip muscle forces and hip joint moments were used as reference outputs. Three deep learning models of LSTM, Transformer, and Mamba were trained and evaluated using the same subject-level split, preprocessing pipeline, and metrics. The best model was then directly tested on an external cohort of 9 patients with osteonecrosis of the femoral head (ONFH) without retraining. In the healthy-subject benchmark, Transformer achieved the best subject-level mean performance for both hip muscle force prediction (RMSE = 1.33 N/kg, MAE = 0.57 N/kg, R2 = 0.819) and hip joint moment prediction (RMSE = 0.11 Nm/kg, MAE = 0.07 Nm/kg, R2 = 0.862), with similar advantages across walking cadences. In zero-shot external validation, Transformer retained moderate predictive ability in ONFH for hip muscle force prediction (RMSE = 1.51 N/kg, MAE = 0.70 N/kg, R2 = 0.537) and hip joint moment prediction (RMSE = 0.17 Nm/kg, MAE = 0.12 Nm/kg, R2 = 0.569). These findings support the feasibility of estimating hip dynamics from gait kinematics, identify Transformer as a strong baseline, and highlight the need for broader pathological validation and improved generalization before clinical application.

Jiaqi Zhang, Ji Hou, Qing Sun +2

Single-Subject Gait Dataset Muscle Anatomy Self-Synchronized Multi-View Joint Angle Monitoring Human Motion Prediction

Ask PDF

Aug 10, 2026cs.CV

Learning human joint torques from pixels

Estimating human joint torques from visual observations is a key step toward bringing biomechanical analysis from controlled laboratories to real-world movement scenarios. Existing torque estimation methods typically depend on surface electromyography, motion-capture markers, force plates, or simulated imitation data, which limits their applicability to ordinary RGB images. In this work, we introduce VID, a vision-based inverse dynamics dataset and benchmark for predicting human joint torques directly from real monocular images. VID contains 63,369 synchronized frames with real human images, kinematic annotations, anthropometric attributes, and OpenSim-derived dynamic labels, providing paired visual and biomechanical supervision for real-image inverse dynamics. We further define a standardized evaluation protocol covering overall torque estimation, joint-specific analysis, and action-specific prediction. To establish a strong reference model, we propose VID-Network, which combines pose-pretrained spatial probabilistic features, marker regression, and temporal torque inference to recover joint torques from image sequences. Experiments on VID show that VID-Network achieves an overall mPJE of 1.7612 N

\cdot

m/kg, improving over the best compared baseline by 39.81%, and obtains the lowest error across all evaluated joint types and most action categories. VID establishes a first practical benchmark for vision-driven human inverse dynamics and provides a foundation for studying biomechanical inference in less constrained environments.

Chen Chen, Rui Cheng

Biomechanics Actuator Pixels

Ask PDF