Organizations: Harvard University · Stanford University
Abstract
Real-world robotic manipulation tasks often involve forceful interactions with the environment, such as using tools of varying weights, transporting objects with different masses, and performing contact-rich tasks like table wiping. Previous learning-based approaches typically employ imitation learning policies that output target end-effector poses tracked by low-level impedance controllers. In these systems, forceful interactions are either implicitly realized through steady-state tracking errors or explicitly commanded using wrist force/torque or tactile sensors. However, implicit approaches generalize poorly across object weights, while explicit approaches require specialized hardware and increase system complexity. In this work, we propose IMPACT, a framework that decouples these forceful tasks into task-planning and internal-model-based predictive control. Extensive simulation and real-world experiments demonstrate that the proposed framework achieves higher success rates and improved generalization to unseen object weights, as well as better safety and energy efficiency.
Force signals provide critical interaction cues for contact-rich robotic manipulation. However, existing methods mostly use force as an additional observation modality, without fully exploiting its role in modeling future interaction dynamics or guiding execution-time feedback correction. In this paper, we propose FAWAM, a force-aware world action model that incorporates force information at three levels: perception, prediction, and closed-loop execution. FAWAM first encodes historical 6-axis force/torque signals to modulate action generation, then jointly predicts future actions and end-effector wrenches to explicitly model contact evolution. It further introduces a residual correction module that uses the predicted wrench trajectory as an execution-time reference to refine actions online based on real-time force feedback. Real-world experiments across multiple contact-rich tasks show that FAWAM improves the average success rate by 36.25% over vision-only baselines and 21.25% over existing force-aware baselines, demonstrating the effectiveness of our force-aware framework for robust contact-rich manipulation.
Learning-based manipulation policies usually predict robot actions from sensory observations and leave their execution to a separate low-level controller. In rigid contact, this separation can be problematic: the same motion to a virtual target or compliant motion command can lead to unstable contact, tracking error, excessive loading, or tool damage, depending on the low-level controller. In this paper, we propose a \textit{Unified Robot Control-Policy Framework} (URF), which connects compliant action prediction with unified impedance-admittance control. Given multimodal observations, URF predicts a virtual target, a stiffness matrix, and an impedance-admittance switch ratio. The switch ratio determines when the controller should behave more like admittance control for accurate motion tracking and when it should move toward impedance control for safer rigid contact. Because demonstration data do not provide ground-truth environment stiffness, we construct switch-ratio labels from measured contact forces and use them to supervise controller-mode prediction. Across box-flipping and line-pressing tasks, URF achieves higher task success rates while reducing failure modes observed with admittance-only execution, including rapid force buildup, large force oscillations, tool breakage, and robot safety stops. These results suggest that contact-aware policies benefit from predicting not only compliant actions but also the controller behavior used to execute them. Project page: https://jiyou384.github.io/urf_project_page/
Human demonstrations are a scalable data source for learning robot manipulation policies. However, common sources of human demonstration data, such as motion-capture trajectories and internet videos, capture mostly motion and appearance while missing the contact forces that are critical for force-sensitive manipulation. In this paper, we introduce ForceBand, a low-cost wrist-worn sEMG system that turns human muscle activity into force-enriched demonstrations. We first collect a 10-hour multimodal dataset containing egocentric video, sEMG, IMU, and fingertip force measurements across diverse actions and objects. Using this dataset, we pre-train an EMG2Force model that predicts per-finger forces from sEMG and IMU signals. After a short user-specific calibration, users can collect target-task demonstrations using only ForceBand and video; EMG2Force then labels these demonstrations with per-finger force traces, producing force-augmented demonstrations for robot policy learning. Experiments show that ForceBand recovers fine-grained fingertip interactions with over 50% lower force prediction error than vision-based baselines and achieves an 87% success rate on pick, squeeze, and place tasks that require object-specific force control across objects with diverse shapes, sizes, and weights. Project website: https://forceband-emg.github.io