Abstract
Accurate, tag-free distance estimation with ultrawideband (UWB) radar is essential for applications such as autonomous guided vehicles, robotics, and environment characterization. For tag-based localization systems, phase-based UWB signal processing techniques have demonstrated sub-wavelength ranging precision, but these approaches are not applicable for passive (tagless) radar setups with weak reflections, mixed multipath conditions, and the absence of a known time-of-flight (ToF) first-path reference. This paper demonstrates for the first time that phase information can be effectively exploited in a fully passive UWB radar setting. We introduce a signal processing framework that extracts reliable distance information by combining coarse amplitude-based estimates with high-resolution phase changes across multiple frequency channels. By referencing phase measurements with the line-of-sight component, the method compensates for hardware-induced phase drift, while the use of multichannel frequency diversity enables disambiguation of periodic phase information and improves robustness against frequencyspecific channel degradation such as Fresnel zones. The proposed approach is validated on a robot equipped with a bistatic UWB radar using DW3000 devices and evaluated in a realistic metallic industrial environment. Experimental results show that our work consistently achieves centimeter-level accuracy even at high speeds, with a median error of 1.69 cm, significantly outperforming existing ~10cm accuracy UWB radar approaches relying only on amplitude-information. We further show how multi-channel fusion exploits uncorrelated channel degradation to reduce the error by more than 40% compared to single-channel operation, and outline how phase modeling and fusion can be pushed toward sub-centimeter accuracy.
Explore similar work
Jul 17, 2026cs.RO
Ultra-Wideband (UWB) ranging has become a viable option for industrial Autonomous Mobile Robot (AMR) localization due to improved accuracy and low cost. However, real-world deployments remain limited by two recurring challenges: calibrating static anchors can be time-consuming and error-prone, and integrating UWB with existing onboard sensors requires careful design to ensure robust and consistent pose estimation. Addressing these challenges, this paper presents an end-to-end pipeline that combines automatic anchor calibration with a generic multi-sensor estimator tailored to surface-bound vehicle motion. It targets existing AMR stacks in scenarios where robot pose priors are available for initialization. The calibration stage estimates anchor positions and range biases, while the localization stage fuses UWB with proprioceptive sensing in a bias-aware Extended Kalman Filter to improve consistency without extensive parameter tuning. Experiments on a commercial logistics AMR in a warehouse setting demonstrate accurate positioning indoors and across outdoor transitions, with improved consistency compared to an earlier estimator formulation. Evaluation on an independent forklift dataset further indicates transferability to other platforms. The method remains effective in test cases with limited line-of-sight and sparse anchor coverage. These results show that UWB localization can be deployed with substantially reduced manual effort while preserving the accuracy required for industrial AMRs. The collected warehouse dataset is made publicly available.
Alexander Raab, Giulio Delama, Roland Jung +1
May 28, 2026cs.RO
Reliable work zone mapping is important for connected and autonomous vehicles (CAVs) to navigate safely and smoothly through work zone areas. Cone-mounted ultra-wideband (UWB) roadside units (RSU) offer a cost-effective way for work zone layout inference, as roadside anchors and vehicle tags provide direct vehicle-to-infrastructure (V2I) range constraints for work zone geometry reconstruction. However, UWB range estimation is degraded by bursty outliers, non-line-of-sight (NLOS) errors, arbitrary anchor-ordering issues, and vehicle pose uncertainties in practical field deployments. To address these challenges, this study proposes a pose-conditioned, permutation-equivariant predictive denoiser for multi-anchor UWB ranging. The model employs shared anchor-wise temporal prediction to capture range dynamics, symmetric set aggregation to handle unordered and missing anchors, and pose-conditioned residual decoding to incorporate vehicle motion as a geometric prior. A two-stage training strategy first learns prediction from observed ranges, and then fine-tunes the denoiser with NLOS-weighted supervision. The method is evaluated on rare real-world V2I UWB field data collected with a CAV, as well as on controlled large-scale simulation benchmarks for ablative insights. Results show that the proposed method substantially improves range accuracy, cone localization, and work zone geometry reconstruction in challenging NLOS-dominated regimes, remains robust to anchor re-indexing and moderate anchor dropout, and reduces measurement-weighted field MSE by 66.9% relative to the raw input.
Jiaxi Liu, Hangyu Li, Yang Cheng +7
Jul 5, 2026cs.LG
Accurate work-zone geometry perception is critical for intelligent transportation systems, and ultra-wideband sensing offers a low-cost approach for infrastructure-aided reconstruction. However, outdoor UWB ranging is often degraded by non-line-of-sight propagation, burst noise, and long-tail errors, which can distort downstream spatial reconstruction. We present GAIA, a geometry-aware, infrastructure-anchored learning framework that couples temporal range modeling with latent anchor-layout estimation and deterministic distance projection. GAIA preserves range denoising as the supervised task while orienting the learned distances toward boundary-consistent reconstruction. We evaluate GAIA on a real-world outdoor UWB dataset with synchronized UWB, GNSS, and IMU measurements, and further test robustness using a real-data-calibrated stress-test simulator. GAIA achieves the lowest overall range MSE and highest polygon IoU among evaluated filtering-based and learning-based baselines, reducing MSE by 18.4% and improving polygon IoU by 15.5% over PoseMLP. These results show that geometry-aware range denoising provides an effective path toward spatially coherent work-zone reconstruction.
Weizhe Tang, Jiaxi Liu, Junwei you +5