Organizations: University of Illinois Urbana-Champaign · University of Maryland College Park
Abstract
Manipulation in confined environments, such as threading a manipulator through narrow apertures, remains a fundamental challenge, especially for conventional rigid robots. Hybrid rigid-soft manipulators offer promise but face two compounding planning challenges: backbone shapes feasible in free space become infeasible under environmental contact, and planning rigid and soft segments independently ignores their kinematic coupling. We present THREAD, the first diffusion-based trajectory planner for hybrid manipulation, learning a generative prior over physically realizable backbone trajectories conditioned on local environment geometry, with physics-inspired losses encoding curvature, smoothness, and collision constraints jointly across both segments. Trained in simulation, THREAD achieves 92.4% task success with 5x fewer collisions than the strongest baseline. We show cross-embodiment real-world transfer with minimal online updates, successfully threading through apertures as small as 1.3x the soft segment diameter.
This research proposes a constrained motion planning framework for robot manipulators in human-robot interaction (HRI). For a non-redundant manipulator with a fully specified end-effector pose, additional requirements such as collision avoidance and self-collision avoidance are difficult to handle as simple null-space secondary tasks. This limitation makes it challenging to generate feasible joint-space trajectories in HRI environments where safety and kinematic constraints must be considered simultaneously. To address this limitation, collision- and self-collision-aware trajectories are generated using Rapidly-exploring Random Tree (RRT) and RRT* algorithms, and the resulting dataset is used to train a diffusion model that generates constraint-satisfying trajectories through guided sampling. To reduce the inference time required for iterative diffusion sampling, consistency distillation is applied, and a joint-weighted jerk regularization term is incorporated into the loss function to promote smoother trajectories by penalizing abrupt changes in joint acceleration. Simulation results show that the consistency model generates 150 trajectory candidates in less than 100 ms, maintains a high episode success rate, and substantially reduces joint and end-effector jerk when jerk regularization is applied.
Most existing vision-language manipulation research targets rigid robotic arms, whose fixed morphology limits adaptability in cluttered or confined spaces. Soft robotic arms offer an appealing alternative due to their deformability, but confront challenges such as unreliable proprioception and distributed low-level actuation. To investigate these challenges, we introduce \ManiSoft, a benchmark for vision-language manipulation with soft arms. ManiSoft features a tailored simulator that couples realistic soft-body dynamics with contact-rich interactions via an elastic force constraint. On this basis, ManiSoft defines four tasks, each highlighting distinct aspects of deformable control, from basic end-effector coordination to obstacle avoidance. To support policy training and evaluation, \ManiSoft{} includes an automated pipeline that generates 6,300 diverse scenes and corresponding expert trajectories. To produce high-quality trajectories at scale, we first employ a high-level planner to decompose each task into a sequence of waypoints, followed by a low-level reinforcement learning policy that generates torque commands to track waypoints. Benchmarking three representative policy models shows relatively promising results in clean scenes but substantial performance drop under randomization. Visualization analysis indicates that failures stem primarily from inaccurate visual estimation of proprioceptive state and limited exploitation of deformability for adaptive obstacle avoiding. We anticipate ManiSoft to serve as a valuable testbed, bridging the gap between rigid and soft arms in the context of vision-language manipulation. Out codes and datasets are released at https://buaa-colalab.github.io/ManiSoft.
We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.