Demonstration augmentation is proposed for cost-efficient data acquisition, but existing methods are fundamentally limited in deformable manipulation due to two challenges: (1) the state space is high-dimensional with physics-induced constraints, making valid configurations impossible to reach via low-dimensional pose perturbations; and (2) trajectory transfer is non-equivariant, as material points no longer move rigidly together under deformation. We present DeformGen, a dynamics-based augmentation framework that achieves topological diversity for deformable objects. For the state challenge, DeformGen expands the valid state distribution by applying localized physical disturbances and forward-simulating the dynamics to obtain topology-coherent, physically plausible deformable states. For the trajectory challenge, DeformGen transfers source manipulation trajectories via deformation-field warping, which lifts per-particle displacements into a continuous spatial function to adapt the end-effector trajectory consistently with the deformed geometry. In this way, our method jointly augments the state distribution and its associated manipulation behavior. Experiments on high-fidelity deformable manipulation benchmarks show that DeformGen generally improves policy learning compared with training on the original demonstrations alone and with rigid-style augmentation baselines.
Dynamic manipulation is a critical capability for robots operating in complex and dynamic environments, where robots must interact with objects that are moving or require rapid adjustments. However, learning models for dynamic manipulation tasks face two major challenges: (1) the combinatorial complexity of dynamic scenarios leads to substantial data requirements, and (2) rapid variations in dynamics require real-time and accurate policy execution. In this paper, we propose DynamicManip to address these challenges through an efficient data augmentation pipeline and a low-latency imitation policy. We first propose a static-to-dynamic augmentation pipeline that synthesizes diverse dynamic manipulation demonstrations from a single static demonstration. Second, we introduce a dynamic-aware adaptive policy that adjusts its inference frequency according to task dynamics, enabling responsive and effective dynamic manipulation. Third, we build a dynamic manipulation benchmark, which includes diverse dynamic tasks with an automatic evaluation system for scalable and consistent assessment. Extensive experiments in both simulation and the real world demonstrate that DynamicManip not only provides significant improvements in data efficiency but also achieves better performance in dynamic manipulation tasks, with a mean success rate 18.4 percentage points higher and policy-query latency 32.9% lower.
Imitation learning enables robots to acquire complex manipulation skills from demonstrations, but its effectiveness is limited by the cost of collecting high-quality data. Trajectory-level data augmentation methods alleviate this challenge by recombining expert demonstrations under varied initial states. However, such methods typically insert interpolations or other non-expert transition segments between disjoint parts, and such non-expert segments could reduce the quality of the generated data. This paper introduces Minimizing Interpolation (MinInter), an effective trajectory selection method that, for each sampled initial configuration, chooses the source demonstration requiring the least interpolation to form a complete trajectory. By explicitly minimizing interpolations during data generation, MinInter produces higher-quality synthetic demonstrations while remaining compatible with existing data generation frameworks. Experiments on 12 manipulation tasks with 26 variants from the MimicGen benchmark show that MinInter consistently improves both data generation success rates and policy success rates, with the largest gains on contact-rich, long-horizon and high-variance settings. Compared to the recent SkillGen framework, MinInter achieves higher policy success rates despite its conceptual simplicity, underscoring the value of interpolation minimization for data augmentation.
Visuomotor policies for manipulation have demonstrated remarkable potential in modeling complex robotic behaviors, yet minor alterations in the robot's initial configuration and unseen obstacles easily lead to out-of-distribution observations. Without extensive data collection effort, these result in catastrophic execution failures. In this work, we introduce an effective data augmentation framework that generates visually realistic fisheye image sequences and corresponding physically feasible action trajectories from real-world eye-in-hand demonstrations, captured with a portable parallel gripper with a single fisheye camera. We introduce a novel Gaussian Splatting formulation, adapted to wide FoV fisheye cameras, to reconstruct and edit the 3D scene with unseen objects. We utilize trajectory optimization to generate smooth, collision-free, view-rendering-friendly action trajectories and render visual observations from corresponding novel views. Comprehensive experiments in simulation and the real world show that our augmentation framework improves the success rate for various manipulation tasks in both the same scene and the augmented scene with obstacles requiring collision avoidance.