Racing a Wheeled Quadruped: Active Load Transfer Mitigation via Model Predictive Control

Load transportation with quadruped robots is strongly affected by the dynamics of the physical interface between the robot and the load. Passive spring-based arms reduce weight and complexity compared to active manipulators, but their spring-damper dynamics can introduce oscillatory forces that degrade locomotion stability. This paper derives an extended Zero Moment Point (ZMP) formulation that includes passive payload-interface dynamics, relating stiffness, damping, and payload mass to the stability margin. The analysis shows that underdamped configurations can resonate with locomotion harmonics. Based on this insight, we augment a Single Rigid Body Dynamics model with passive subsystem dynamics and integrate it into a Model Predictive Control framework. In simulation, the proposed controller reduces stability violations by up to $10\times$, from $7.0\%$ to $0.7\%$, and increase locomotion efficiency by lowering horizontal ground reaction force effort by up to $15\%$ compared to a nominal baseline. Hardware experiments with a $2\,\mathrm{kg}$ payload show stable locomotion under pull-release disturbances where the nominal controller fails. The same model also enables end-effector tracking through passive arm dynamics without direct arm actuation.

In this letter, we present a hierarchical control framework that enables wheeled bipedal robots to perform planar object sliding tasks with their wheeled legs. The proposed approach formulates a nonlinear model predictive controller (NMPC) based on a reduced-order three rigid bodies (TRB) dynamical model that explicitly accounts for the hip roll degree of freedom and multiple wheel-environment contact modes, which is essential for lateral stepping and pedipulation tasks. Within this framework, the NMPC simultaneously regulates robot locomotion and interaction forces, allowing the robot to stably execute both rolling and object manipulation behaviors. A trajectory-optimization-based robot-object motion planner is developed to generate reference motions that incorporate stick-slip transitions in ground-object contact. Two representative pedipulation motions, namely scooting and lateral sliding, are validated through real-world hardware experiments, in which the robot successfully retrieves a 1 kg object from under a desk and slides a 4 kg object over a distance of 0.228 m via scooting.

This paper presents a novel layered planning and control framework based on multi-rate nonlinear model predictive control (MR-NMPC) that enables quadrupedal robots to perform hybrid bipedal locomotion with wall-assisted support in constrained environments. Real-time trajectory optimization for this locomotion presents significant challenges, as the controller must simultaneously plan for both the contact points and the continuous trajectories of the robot's center of mass (CoM) and orientation within the robot's nonlinear dynamics while accounting for unilateral contact constraints, underactuation, and the switching nature of the robot's dynamics. At the high level of the control framework, an MR-NMPC is proposed, which dynamically plans both the discrete-time trajectories of the contact points and the continuous-time trajectories of the CoM and orientation, using a single rigid body (SRB) dynamics model. By incorporating contact-point planning within the multi-rate optimal control framework, this approach enhances dynamic stability compared to heuristic foot placement strategies. At the low level of the control framework, a nonlinear whole-body controller (WBC) based on virtual constraints and a quadratic program enforces full-order dynamics and tracks the MR-NMPC references. The proposed approach is validated through extensive numerical simulations demonstrating the robust wall-assisted bipedal locomotion of a Unitree A1 quadrupedal robot on rough terrains and under external disturbances in a constrained environment. Comparative analysis shows that the proposed MR-NMPC achieves a 2.9 times higher success rate compared to conventional MPC with heuristic-based foot placement strategies in negotiating irregular terrain at high speeds.