Abstract
Disturbance-robust UAV position control is easy to demonstrate in benign simulations but much harder to make fast in approach, well behaved near the target, and credible beyond a single benchmark. This letter presents a layered terminal-control architecture for multi-waypoint UAV position regulation together with a staged evaluation across PyBullet, PX4/Gazebo, and hardware. Phase I uses a PyBullet benchmark with stochastic wind for rapid structural selection, identifying a controller core that separates smooth approach generation, persistent-bias compensation, and supervised near-target terminal regulation. Phase II carries only that main architecture into a more demanding PX4/Gazebo closed loop, where the outer-loop controller acts through a cascaded flight stack with delay-sensitive settling and stronger transit-to-hover coupling. This step exposes which benchmark gains survive autopilot-mediated dynamics and which refinements collapse once the loop becomes more deployment-like. In Phase I, the bare controller attains 0.024 m mean late-stage wind error. In Phase II, the final controller is selected using a transfer-oriented rule emphasizing absence of benchmark priors, cross-scenario balance, and deployable supervisory logic. Strict is used as the primary reporting reference; the supplementary retrospective Grace analysis shows that part of the residual failure set is sensitive to completion semantics rather than gross waypoint-miss behaviour. The evaluation is completed on one Vicon-tracked Tello stack through a two-level hardware study. Taken together, the results suggest that benchmark success becomes more informative when the main controller design is separated from benchmark-specific refinement and remains defensible under harder closed-loop evaluation.
Explore similar work
Jun 30, 2026cs.RO
Accurate 4D trajectory prediction and closed-loop tracking are essential for Unmanned Aerial Vehicle (UAV) swarms to achieve safe and efficient operations in complex low-altitude environments such as urban airspaces, industrial sites, and indoor facilities. However, this task remains challenging due to intrinsic nonlinearity of UAV swarm dynamics and strict real-time constraints of swarm formation control. To address these challenges, we propose a unified framework that couples coarse-to-fine trajectory forecasting with uncertainty-aware Distributed Nonlinear Model Predictive Control (DNMPC). Our approach features two key innovations: 1) a dimension-decoupled trajectory prediction module that reduces computational complexity by forecasting axis-wise motion, and 2) a diffusion-based residual dynamics refinement module that captures temporally correlated dynamic uncertainties. These refined predictions are then integrated into a DNMPC loop to ensure formation stability. We also introduce a synchronized multi-scenario 4D UAV swarm dataset spanning six representative airspace scenarios. The dataset contains over \textbf{7,900} frames of synchronized three-UAV trajectories with frame-level annotations of speed intention and target sector. Extensive experiments demonstrate that our approach outperforms state-of-the-art baselines, reducing trajectory tracking error by up to \textbf{10-15%} and achieving sub-\textbf{0.07,m} average tracking error in complex urban and industrial environments, while maintaining real-time inference speeds of 34 FPS (sub-30 ms latency) suitable for agile flight.
Tianshun Li, Hongliang Lu, Haoang Li +1
May 3, 2026eess.SY
Autonomous navigation and obstacle avoidance remain a core challenge of modern Unmanned Aerial Vehicles (UAVs). While traditional control methods struggle with the complexity and variability of the environment, reinforcement learning (RL) enables UAVs to learn adaptive behaviors through interaction with the environment. Existing research with RL prioritizes the mission success at the expense of mission time and safety of UAVs. This study integrates Potential Based Reward Shaping (PBRS) with Control Lyapunov Functions (CLF) and Control Barrier Functions (CBF) to simultaneously optimize mission time and ensure formal safety guarantees. An RL model is trained in a generalized simple environment, then used in complex scenarios incorporating a CLF-CBF-QP filter without further training. Experimental results in simulated environments demonstrate a significant reduction in mission time and outstanding performance in complex environment.
Ashik Abrar Naeem, Mohammad Ariful Haque
Jul 29, 2026eess.SY
This work presents a comprehensive analysis and design of global sensitivity-based input shapers for a 3D Unmanned Aerial Vehicle-payload system, emphasizing robustness against uncertainties in payload mass and rope length. The proposed approach also leverages the Shapley value concept in controller design to systematically account for uncertainties, thereby reducing the controller's sensitivity to unknown parameters. To validate the effectiveness of the methodology, numerical simulations are conducted, comparing the proposed controller against non-robust, robust, and minimax designs. The results demonstrate that the standard global sensitivity or Shapley-based input shapers improve performance and offer a promising framework for uncertainty-aware control in aerial payload transport.
Karan Baker, Sanjay Maharjan, Tariq Hlayel +3