Energy-Optimal Spatial Iterative Learning within a Virtual Tube
Authors: Chen Min, Shuli Lv, Pengda Mao, Huixin Cao, Li Hong, Quan Quan
Abstract
Due to the limited endurance of embedded energy sources such as lithium-polymer (LiPo) batteries, the flight duration and operational range of unmanned aerial vehicles (UAVs) are severely constrained. Although energy-efficient trajectory planning and control have been widely studied, most existing approaches rely on accurate system models and computationally expensive optimization procedures. This paper proposes a model-free online iterative learning (IL) framework to minimize energy consumption. Without requiring explicit models of UAV dynamics or energy consumption, the proposed method improves energy efficiency while maintaining a low computational cost. The per-iteration computational complexity is O(n), where n denotes the number of path points. In the tested cases, the proposed method is approximately 50--60 times faster than the model-based IPOPT benchmark. Simulation results and real-world flight experiments across multiple UAV platforms validate the effectiveness, computational efficiency, and practical applicability of the proposed approach.
Battery-powered multirotor unmanned aerial vehicles (UAVs) can rapidly map unknown environments, but mission performance is often limited by energy rather than geometry alone. Standard exploration policies that optimise for coverage or time can therefore waste energy through manoeuvre-heavy trajectories. In this paper, we address energy-aware autonomous 3D exploration for multirotor UAVs in initially unknown environments. We propose Energy-Aware Autonomous Exploration (EAAE), a modular frontier-based framework that makes energy an explicit decision variable during frontier selection. EAAE clusters frontiers into view-consistent regions, plans dynamically feasible candidate trajectories to the most informative clusters, and predicts their execution energy using an offline power estimation loop. The next target is then selected by minimising predicted trajectory energy while preserving exploration progress through a dual-layer planning architecture for safe execution. We evaluate EAAE in a full exploration pipeline with a rotor-speed-based power model across simulated 3D environments of increasing complexity. Compared to representative distance-based and information gain-based frontier baselines, EAAE consistently reduces total energy consumption while maintaining competitive exploration time and comparable map quality, providing a practical drop-in energy-aware layer for frontier exploration.
This paper investigates a multi-Unmanned Aerial Vehicle (UAV) joint base station-assisted Internet of Vehicles (IoV) task offloading system in dense urban environments. To minimize system delay and energy consumption under strict coupling constraints, the complex non-convex optimization problem is decoupled into a hierarchical execution framework. First, a sequential distributed optimization algorithm based on Second-Order Cone Programming (SOCP) is proposed to optimize the 3D flight trajectory of each UAV, ensuring adaptive network coverage. Second, a novel hybrid resource scheduling paradigm synergizing Deep Reinforcement Learning (DRL) and Large Language Models (LLMs) is developed. Within this framework, the DRL agent dictates the initial resource allocation, while the LLM acts as a semantic macro-scheduler to rectify long-tail allocation imbalances for failed and surplus tasks. Crucially, a reward decoupling mechanism is introduced to isolate DRL training from external LLM interventions, thereby ensuring policy convergence. Finally, the task offloading ratios are precisely determined via Linear Programming (LP) within an alternating optimization loop. Simulation results demonstrate that the proposed method significantly outperforms traditional multi-agent reinforcement learning baselines in terms of task success rate and system efficiency.
Trajectory tracking performance of Uncrewed Aerial Vehicles (UAVs) degrades during high-speed and agile flight due to the depletion of the battery and subsequent loss of maximum available thrust. In applications such as drone racing, the consequent trajectory tracking error leads to a collision with obstacles and a subsequent failure to complete the race. In this paper, we present a novel method for integrating battery and propulsion system models into a Nonlinear Model Predictive Controller (NMPC) framework to enable real-time prediction of the voltage, consumed current, power, and maximum available thrust of the platform. This enables our approach to account for the dynamic variations in the maximum available thrust of the UAV caused by battery discharge, allowing it to plan for the depleting thrust and improve trajectory tracking performance. A trajectory planning algorithm is implemented to replan the trajectory in-flight based on evolving thrust limits. The accuracy of the proposed model is verified in real-world flight experiments, while the effectiveness of the replanning algorithm is evaluated in simulation. Compared to an uncompensated flight, our novel approach demonstrates achieves a collision-free flight to achieve a 6-fold decrease in tracking Root Mean Square Error (RMSE), a 46 % increase in flight distance, and a 100 % increase in flight time in an obstacle-ridden environment.