Global navigation for ground robots in complex multi-level environments requires representations that accurately capture traversable regions while enabling efficient path planning. Current approaches present key limitations: Point clouds and volumetric occupancy maps lack explicit surface structure for traversability estimation, whereas direct pathfinding on dense triangle meshes is computationally prohibitive. Navigation meshes mitigate these challenges through polygonal abstraction of the underlying mesh, but assume yaw-invariant traversability, rendering them unsuitable for non-circular robots in constrained spaces. We propose SE(2) Navigation Mesh (SE(2) NavMesh), a polygonal representation of traversable regions that encodes yaw-dependent traversability. Our method evaluates traversability using footprint masks and constructs a graph over yaw-specific layers with explicit translational and rotational connectivity. Grounded in this representation, we develop an A*-String Pulling-A* (ASA) pathfinding strategy that hierarchically optimizes robot position and heading. We also present an online method that incrementally updates the SE(2) NavMesh from streaming point clouds during concurrent geometry reconstruction. In simulation, the SE(2) NavMesh captures over 50% more traversable area than classical NavMeshes, and the SE(2) NavMesh + ASA pipeline consistently outperforms sampling-based baselines in constrained environments. Extensive real-world experiments on a physical robot validate real-time online generation and successful navigation across multiple environments.
Ground robot navigation in complex 3D environments is often hindered by geometric ambiguity, where non-traversable structures such as furniture share local geometric properties with navigable ground. Furthermore, the computational cost of searching massive voxel spaces remains a significant challenge. To address these issues, we present a surface extraction framework that constructs a reduced state space of physically reachable standing positions by enforcing ground support, overhead clearance, and seed-based connectivity constraints. Evaluation across five Matterport3D indoor scenes and three PCT benchmark scenes demonstrates over 80% state space reduction and sub-millisecond A* search on the Matterport3D scenes, with 100% planning success across all 300 tested queries.
Convex free regions provide a structured and optimization-friendly representation of collision-free space for robot navigation in unknown and cluttered environments. However, existing methods typically enlarge local collision-free regions mainly according to surrounding obstacle geometry. In cluttered environments, such strategies may fail to generate regions that both accommodate robot geometry and preserve traversable extension along candidate motion directions, thereby limiting downstream traversal, especially in narrow passages. Even when such a region is available, safe motion generation remains challenging, because safety checking at discretized trajectory samples does not guarantee continuously collision-free motion when robot geometry is modeled explicitly. To address these issues, we propose a navigation framework that jointly incorporates candidate motion directions and robot geometry into convex free-region generation, and achieves continuously collision-free motion through continuous-safe trajectory generation. Within each region, the framework performs geometry-aware target pose selection and trajectory generation, together with Lipschitz-based continuous safety certification and local refinement. The resulting free regions and candidate motions are maintained in a region-based graph to support incremental planning. Quantitative results in cluttered 2D navigation scenarios show that the proposed method generates free regions better aligned with downstream traversal and enables reliable collision-free navigation, while additional 3D and real-world experiments on a quadrupedal robot and a UAV demonstrate the extensibility and practical applicability of the framework. The open-source project can be found at https://github.com/ZhichengSong6/FRGraph.
Autonomous exploration on uneven terrain requires ground robots to balance exploration efficiency, coverage completeness, and terrain safety. Detailed tsrrain reasoning improves local reliability but can slow large-scale exploration, whereas coarse region guidance expands quickly in open areas but can miss narrow passages and irregular traversable boundaries. To address this challenge, this paper presents TASG-Explore, a traversability-aware sector-guided exploration framework for ground robots. The framework first performs hierarchical traversability analysis using variable-voxel ground fitting and adaptive 8-bit obstacle encoding. It then splitting cost map into sectors, incrementally updates sector clusters, extracts terrain-coupled frontier viewpoints, and maintains a dynamic topological roadmap with unknown topological hypotheses. Finally, a sector-guided planner selects region targets and inserts local viewpoints to generate efficient exploration routes. Benchmark experiments in diverse challenging environments, including caves, forests, and rugged hills, show that TASG-Explore achieves the best overall performance among six representative state-of-the-art planners. The proposed traversability analysis improves processing efficiency by 6.3 times while maintaining high accuracy, and the exploration planner improves exploration efficiency by 51% and increases coverage by up to 2.95 times in rugged hill scene. Large-scale real-world experiments further demonstrate the practical value of the proposed method.