Dynamic Evaluation of Classical and Control-Aware Optimal Trajectory Planning in Robot Manipulators

Sampling-based motion planners offer a practical and scalable approach to kinodynamic motion planning, notably for high-dimensional, underactuated, or non-holonomic systems. However, these planners are typically used offline, requiring execution to begin only after the trajectory has been computed. In addition, the planned trajectory may not be accurately tracked in the presence of motion uncertainty, leading to deviations from the nominal solution. In this work, these limitations were addressed within a unified framework, \method, an asymptotically-optimal meta-planner framework that improves both path quality and tracking performance during execution. In addition to the main execution thread, this framework comprises a replanning method that continuously explores the state space and refines the trajectory during execution, and an optimization process that refines future control inputs to reduce tracking error. Together, these components enable \method to leverage asymptotically optimal planning online while improving execution accuracy under uncertainty. The proposed approach is evaluated in both simulation and real-world environments across multiple systems, demonstrating consistent improvements in trajectory quality, tracking accuracy, and overall performance compared with baseline methods.

Navigating doorways is a fundamental capability for mobile manipulators operating in human environments, requiring coordinated motion between the mobile base and manipulator arm. This paper presents a motion planning framework that generates dynamically feasible and collision-free trajectories for autonomously opening and traversing both push and pull doors. The proposed method formulates the robot and door as a coupled dynamical system within a nonlinear Model Predictive Control (MPC) optimization framework. Manipulation feasibility is enforced through a penalty-based constraint, avoiding explicit arm kinematic modeling in the planner. Simulations and a hardware experiment demonstrate that the approach successfully plans feasible trajectories for door traversal.

Motion planning under dynamics constraints, i.e, kinodynamic planning, enables safe robot operation by generating dynamically feasible trajectories that the robot can accurately track. For high-DOF robots such as manipulators, sampling-based motion planners are commonly used, especially for complex tasks in cluttered environments. However, enforcing constraints on robot dynamics in such planners requires solving either challenging two-point boundary value problems (BVPs) or propagating robot dynamics, both of which cause computational bottlenecks that drastically increase planning times. Meanwhile, recent efforts have shown that sampling-based motion planners can generate plans in microseconds using parallelization, but are limited to geometric paths. This paper develops FLASK, a fast parallelized sampling-based kinodynamic motion planning framework for a broad class of differentially flat robot systems, including manipulators, ground and aerial vehicles, and more. Differential flatness allows us to transform the motion planning problem from the original state space to a flat output space, where an analytical time-parameterized solution of the BVP problem can be obtained. A trajectory in the flat output space is then converted back to a closed-form dynamically feasible trajectory in the original state space, enabling fast validation via ``single instruction, multiple data" parallelism. Our framework is fast, exact, and compatible with any sampling-based motion planner, while offering theoretical guarantees on probabilistic exhaustivity and asymptotic optimality based on the closed-form BVP solutions. We extensively verify the effectiveness of our approach in both simulated benchmarks and real experiments with cluttered and dynamic environments, requiring mere microseconds to milliseconds of planning time.