Stop to Decide: Latency-Aware Proprioceptive Navigation Primitives for Mapping-Free Quadruped Inspection

Learning-based control has revolutionized dynamic locomotion, yet navigating unstructured terrain remains limited by a robot's incomplete awareness of imminent ground contact. While global perception systems such as LiDARs and depth cameras provide environmental context, they are frequently plagued by latencies, occlusions, and the high computational cost of dense geometric reconstruction. On the other hand, proprioceptive feedback is purely reactive, initiating corrections only after impact has occurred. This work explores embedding a minimal suite of low-cost, high-frequency infrared proximity sensors directly into the feet of a quadrupedal robot. These sensors provide "pre-contact" feedback that is robust to self-occlusions and significantly less computationally demanding than conventional vision-based pipelines. By integrating these localized signals into a reinforcement learning framework, we enable the robot to anticipate terrain discontinuities such as gaps and stepping stones that are problematic for traditional perception stacks due to occlusions or state estimation drift. We demonstrate that such sparse, near-field sensing can be reliably modeled in simulation and transferred to the real world with high fidelity. Experimental results show that local proximity sensing substantially improves traversal robustness over discrete terrain and offers a low-power, low-latency alternative or complement to complex global perception suites in unpredictable environments. For more information about results and methods, please see the project website: https://sites.google.com/view/foot-tof/home.

Learning-based quadrupedal locomotion typically relies on complex reward formulations that entangle task specification, operational limits, gait preference, and terrain adaptation within a single optimization objective. We instead treat these functions through distinct mechanisms: rewards for task specification, constraints for operational limits, energy minimization for gait preference, and exteroceptive perception for adapting energy use to terrain difficulty. We show that these components jointly enable efficient, terrain-adaptive locomotion, and that removing each component exposes a distinct failure mode. Our formulation removes explicit gait priors (including air-time, contact-count, and foot-clearance targets) in favor of emergent behavior. Compared to a conventional complex-reward baseline, our formulation achieves comparable terrain traversal while reducing cost of transport by 56% and operational-limit violations by 96%. The resulting policies transfer zero-shot to a physical Unitree Go2 using LiDAR-based elevation mapping. Project website with videos: https://tinyurl.com/locomposition.

Reliable odometry for legged robots without cameras or LiDAR remains challenging due to IMU drift and noisy joint velocity sensing. This paper presents a purely proprioceptive state estimator that uses only IMU and motor measurements to estimate body pose and velocity, with a unified formulation applicable to quadruped and wheel-legged robots and extensible to other legged morphologies. The key idea is to treat each reliable contact as a kinematic anchor: joint-torque--based foot wrench estimation selects stance contacts, and the corresponding footfall records provide intermittent world-frame constraints that suppress long-term drift. To prevent elevation drift during extended traversal, we introduce a lightweight height clustering and time-decay correction that snaps newly recorded footfall heights to previously observed support planes. For wheel-legged platforms, the recorded contact is further propagated by effective wheel rolling displacement with shank-motion compensation and a slope-aware rolling direction. To improve foot velocity observations under encoder quantization, we retain an inverse-kinematics cubature Kalman filter as an optional velocity-enhancement module that filters foot-end velocities from joint angles and velocities. The implementation further mitigates yaw drift through multi-contact geometric consistency, which is injected as a soft heading prior rather than as a hard reset of the attitude state. The method is evaluated on four quadruped platforms.