PACE: Polar Axis-Conditioned Estimation for PairUAV Relative Localization

A central challenge in image-goal UAV navigation under Global Navigation Satellite System (GNSS) denial is estimating metric distance and heading between current and goal views. Dense pairwise geometry models capture relative scene structure, but without a calibrated metric scale, they cannot directly provide reliable distance estimates for navigation. Although global scale calibration corrects the dominant scale bias, the remaining errors vary systematically with distance. In this paper, Range-Aware Scale Recovery (RASR) is proposed, which complements global scale calibration with range-aware residual correction. RASR encodes pairwise geometry extracted by a frozen Matching And Stereo 3D Reconstruction (MASt3R) backbone as a compact descriptor and separates the scale-recovery core from task-specific command calibration. On the official online evaluation of the UAVs in Multimedia 2026 PairUAV challenge, RASR achieved a total error of 0.003189, achieving a lower total error than global scale calibration alone. The results demonstrate that range-aware residual correction improves metric distance estimation beyond global scale calibration. Code and materials are available at https://github.com/lht-research/rasr-pairuav.

Global visual localization of unmanned aerial vehicles (UAVs) using remote-sensing reference maps has attracted increasing attention. However, acquisition-time and imaging-platform differences between UAV and reference imagery induce substantial cross-domain appearance and viewpoint shifts, challenging robust six-degree-of-freedom (6-DoF) pose estimation. We address these shifts by sampling UAV-viewpoint reference views from Google 3D Tiles across locations, altitudes, and orientations. A two-stage cross-domain fine-tuning recipe adapts SALAD using pose-near positives and geographically distant hard negatives, while local geometric consistency re-ranks the Top-K candidates. We further propose Retrieval-In-Matching (RIM), which freezes the adapted DINOv2-B retriever and distils a local-descriptor decoder that reuses its token field alongside a shallow VGG19 detail stream. One query-side DINOv2-B forward thus serves both SALAD retrieval and local description, eliminating a second foundation-model backbone while preserving retrieval descriptors by construction. We evaluate RIM zero-shot on the reconstructed EPFL Urbanscape and self-collected Chang'an Park datasets, both geographically disjoint from the training data. RIM outperforms ten recent retrieval baseline families. At 25/50 m under the full 3D distance metric, it improves Recall@1 over SALAD by 8.55/13.77 percentage points on EPFL and 4.45/8.94 points on Park. At Top-K=5, the complete measured localization query, including retrieval, candidate matching, and robust geometric verification, takes 67.9 ms end-to-end: 1.8 times faster than the strongest separate sparse-matching baseline and over 40 times faster than RoMa, while achieving comparable re-ranking accuracy. These results establish an efficient and deployable pipeline for UAV global visual localization in GNSS-challenged environments.

We present AeroMap3D, a monocular 6-DoF UAV localization system that anchors onboard imagery to visual, geometric, and semantic map priors for GNSS-denied navigation. AeroMap3D addresses two fundamental challenges in map-referenced aerial localization: the cross-view discrepancy between UAV imagery and satellite maps, and the structural inconsistency between bare-earth digital elevation models (DEMs) and urban scenes. First, we introduce a lightweight adapter that enables a dense matcher pretrained on internet-scale generic data to perform reliable UAV-to-map registration without finetuning. By estimating the scale ratio and yaw offset between the UAV image and map tile, the adapter removes the dominant geometric misalignment induced by altitude, camera field of view, and heading before dense correspondence estimation. Second, AeroMap3D lifts 2D UAV-map correspondences onto DEM terrain while using OpenStreetMap annotations to reject semantically unreliable matches before RANSAC-PnP pose estimation, thereby reducing errors caused by unmodeled building heights and off-nadir structures. Delayed map-based pose measurements are further fused with relative-motion priors using a delayed-state EKF for continuous trajectory estimation. Without UAV-Terra3D retraining or tuning, AeroMap3D localizes all trajectories across eight Austin sites within 50 m and achieves 5.88 m mean 3D error over 55 km of flight.