Autonomous flight in confined and cluttered environments is fundamentally limited by the restricted field of view (FoV) of onboard sensors. Passive self-rotation expands sensing coverage without additional sensors but introduces a tradeoff between swept-FoV refresh rate and flight performance. This letter presents a configuration-induced passively self-rotating tricopter for perception-enhanced autonomous flight. Firstly, the rear-arm configuration parameter is exploited to regulate the passive self-rotation operating point, providing an airframe-level mechanism for balancing swept-FoV refresh rate and flight performance. Secondly, a hierarchical autonomy framework integrating planning and control is developed to enable agile and robust autonomous flight under continuous passive self-rotation. For waypoint-based inspection, guide-point replanning is further used to improve task-level coverage. Extensive real-world experiments, including high-speed trajectory tracking, disturbance-rejection tests, and autonomous navigation in representative cluttered environments, demonstrate the effectiveness of the proposed approach for perception-enhanced autonomous flight.
Safe and efficient trajectory planning in unknown, cluttered 3D environments constitutes a critical bottleneck for deploying Unmanned Aerial Vehicles (UAVs) in real-world applications. This challenge is further exacerbated by the limited field-of-view (FOV) and sensing range of onboard sensors. Many existing methods either make simplistic assumptions about unexplored space or rely on conservative heuristics such as speed limits or fixed perception patterns, reducing efficiency and generalizing poorly across different sensor types. In this work, we propose a novel planning framework that directly integrates active perception into trajectory optimization, thereby improving safety while preserving efficiency. The perception constraints are derived from the UAV's dynamic model and formulated in the sensor coordinate frame, which enables precise handling of FOV geometry. The velocity-triggered activation mechanism enables the planner to balance perception and motion efficiency. We introduce an active perception sub-trajectory segment with parametric start-time optimization, mitigating collision risks from late obstacle detection. Our formulation enables active perception during arbitrary 3D maneuvers, extending beyond prior methods designed mainly for horizontal motion. All constraints and penalties are incorporated into a differentiable optimization problem, so the planner requires only a simple front-end global path for guidance, rather than a computationally expensive perception-aware path generator. Extensive simulations and real-world experiments demonstrate robust performance across diverse unknown environments with varying sensor configurations.
Autonomous flight of aerial robots in narrow space remains challenging due to strong aerodynamic disturbances and limited flying space. Existing approaches mainly address aerodynamic disturbances at the control level, while motion planning typically relies on geometric constraints and fixed speed limits, leading to conservative or unsafe behaviors in confined environments. This paper presents a disturbance-aware planning and control framework (DAPCF) that integrates online disturbance estimation into the planning-control loop for quadrotor flight in narrow space. First, the dual-loop observers estimate 6-degree-of-freedom disturbance forces and torques in real time based on odometry and motor speed measurements. Then, a disturbance risk function is introduced that adaptively modulates the reference speed of the planner based on disturbance estimation, reducing velocity when disturbances exceed a threshold and restoring it under low-disturbance conditions. Finally, a motor-dynamics-based nonlinear model predictive controller (MDNMPC) with disturbance compensation is designed to ensure robust trajectory tracking under perturbed conditions. Experiments demonstrate that a quadrotor with a diagonal length of 0.39m can traverse straight, sloped, and curved tunnels as narrow as 0.6m, outperforming human pilots in both success rate and flight efficiency.
Quadrotor unmanned aerial vehicles (UAVs) are increasingly deployed in complex missions that demand reliable autonomous navigation and robust obstacle avoidance. However, traditional modular pipelines often incur cumulative latency, whereas purely reinforcement learning (RL) approaches typically provide limited formal safety guarantees. To bridge this gap, we propose an end-to-end RL framework augmented with model-based safety mechanisms. We incorporate physical priors in both training and deployment. During training, we design a physics-informed reward structure that provides global navigational guidance. During deployment, we integrate a real-time safety filter that projects the policy outputs onto a provably safe set to enforce strict collision-avoidance constraints. This hybrid architecture reconciles high-speed flight with robust safety assurances. Benchmark evaluations demonstrate that our method outperforms both traditional planners and recent end-to-end obstacle avoidance approaches based on differentiable physics. Extensive experiments demonstrate strong generalization, enabling reliable high-speed navigation in dense clutter and challenging outdoor forest environments at velocities up to 7.5 m/s}.