In this paper, we study an unmanned aerial vehicle (UAV)-assisted integrated sensing and communication (ISAC) system, where a UAV enhances the sensing capability of a base station (BS) towards a target while ensuring reliable communication towards a downlink user. This architecture is practically attractive for future wireless networks due to the UAV's controllable mobility and adaptive sensing coverage in wireless environments. The sensing performance is characterized by the average Cramér-Rao bound (CRB), which quantifies the minimum variance of the unbiased angle-of-arrival estimation. To enhance the sensing performance, the UAV trajectory and beamforming parameters are jointly optimized under power and mobility constraints, while satisfying communication requirements to the downlink user. To address the resulting non-convex problem, we employ null-space projection for beamforming design and adopt deep reinforcement learning for the trajectory optimization over a discrete-time scale. In each time slot, beamforming is optimized based on the channel state information to improve CRB performance while mitigating interference between the BS and the communication user. Simulation results demonstrate that the proposed method significantly reduces the time-averaged CRB by over 10%, compared with the ISAC system without UAV assistance, and also achieves a higher sensing accuracy than both the fixed-UAV-trajectory and the maximum-ratio-transmission-based beamforming benchmarks.
Uncrewed aerial vehicles (UAVs) are increasingly considered as aerial platforms capable of providing both sensing and communication services, representing a promising paradigm for intelligent transportation systems. This paper investigates the optimal time allocation for a UAV-enabled integrated sensing and communication (ISaC) system operating in the X-band for vehicular networks. We analyze the trade-off between sensing accuracy and communication performance under practical UAV constraints and fading effects, considering both single-shadowing and double-shadowing channel models. An optimization framework is developed to allocate time between sensing and communication while guaranteeing minimum communication rates and sufficient sensing reliability. Simulation results demonstrate adaptive time allocation strategies, highlighting how UAV-to-ground channel conditions and target distances influence the balance between sensing and communication in smart mobility scenarios.
The detection of non-cooperative unmanned aerial vehicles (UAVs) presents significant challenges for Integrated Sensing and Communication (ISAC) systems due to the inherent limitations of single-modal perception and the competition for shared communication and sensing resources. To address these challenges, this paper proposes a novel Camera-Cooperative ISAC (CC-ISAC) framework that employs multimodal sensing to enable efficient UAV beam steering and tracking. The proposed framework employs cameras for coarse-grained airspace monitoring and utilizes ISAC for fine-grained, high-precision sensing, forming a complementary perception loop that enhances both sensing accuracy and resource efficiency. Within this framework, two key modules are developed: (1) a Vision-to-Echo Data Alignment (V2EDA) model that aligns visual and echo-domain features through cross-attention mechanisms, and (2) a Multimodal Fusion-Based Estimation (MMFE) model that integrates historical multimodal data with current observations for robust state estimation. Extensive evaluations conducted on the DeepSense 6G dataset demonstrate that the proposed framework achieves an average reduction of 71% in beam steering overhead and 1.69-11.15% in tracking overhead while maintaining high angular estimation accuracy. The CC-ISAC framework effectively mitigates resource contention between sensing and communication, enabling reliable UAV surveillance while freeing substantial system resources for additional communication tasks, thereby representing a practical advancement in ISAC system design.
With the growing demand for satellite sensing and communication, the limited wireless resources are difficult to support multiple satellite systems. Therefore, it is desired to investigate integrated sensing and communication (ISAC) in low Earth orbit (LEO) satellite systems to enable multi-functionality within a single satellite, thereby saving both spectrum and orbital resources. In this paper, a framework for ISAC in LEO satellite systems is established, where a satellite can simultaneously sense multiple targets and serve multiple communication users (CUs) over the same spectrum. Considering the limited onboard energy of satellite, a novel robust beamforming design algorithm is developed with the goal of minimizing total transmit power while satisfying the mean squared error (MSE) requirements for sensing and signal-to-interference-plus-noise ratio (SINR) requirements for communication in presence of channel phase uncertainty which exacerbates the cross-functional interference. According to theoretical analysis, the proposed algorithm for ISAC in LEO satellite systems is effective. Moreover, extensive simulations confirm the superiority of the proposed algorithm over baselines.