Cable-driven manipulators exhibit strong nonlinearities and low structural stiffness, which make precise control challenging under time-varying uncertainties and external disturbances. This paper presents a time-delay-estimation (TDE)-based adaptive fractional-order nonsingular terminal sliding mode (AFONTSM) control strategy for cable-driven robots. A robust controller is constructed within a TDE-based model-free framework by combining fractional-order nonsingular terminal sliding mode error dynamics with a fast terminal sliding mode reaching law. The main contribution is a new adaptive law that introduces an adaptive exponential term into the update gain to form a nonlinear adaptive mechanism. This design improves adaptive regulation under different operating conditions by suppressing noise-induced chattering during smooth tracking while preserving or enhancing the adaptive gain during trajectory reversal. Lyapunov analysis proves the ultimate uniform boundedness of the tracking error. Experimental results show that, compared with the baseline method, the proposed controller reduces RMSE by 34.52% and 31.11%, ITAE by 33.79% and 32.97%, and ISCT by 6.69% and 17.77% for the two joints, respectively. Further comparisons with recently reported adaptive laws demonstrate that the proposed law provides faster adaptive response, more stable gain evolution, and improved chattering suppression. Additional payload tests further verify the robustness and repeatability of the proposed method.
This paper addresses the challenge of simultaneously compensating for state-dependent uncertainties and enforcing time-varying state constraints in Euler-Lagrange systems, a common requirement in robotics that remains underserved by existing control designs. A novel adaptive control framework is developed that combines an artificial time-delay-based uncertainty estimation strategy, also known as time-delay estimation, with a barrier Lyapunov function to enforce constraint-aware control design. Specifically, a state-dependent upper bound on the time-delay estimation approximation error is analytically formulated, and an adaptive law is constructed to estimate its parameters online, enabling real-time state-dependent uncertainty compensation without relying on prior model knowledge. To ensure constraint compliance, the barrier Lyapunov function-based controller enforces time-varying bounds on both position and velocity. The resulting architecture is provably stable via Lyapunov analysis. Experimental results on a five-degree-of-freedom robotic manipulator validate the framework's capability, compared with the state of the art, in maintaining strict adherence to safety-critical constraints under dynamic uncertainties.
Saksham Gupta, Rishabh Dev Yadav, Sarthak Mishra +5
Steering Cable-Driven Parallel Robots (CDPRs) beyond their Wrench-Feasible Workspace (WFW) augments their capabilities in challenging scenarios such as during aggressive maneuvers or following a cable failure. In this context, although the determination of cable tensions is a well-studied topic, only a few approaches address these scenarios. Therefore, this paper introduces an extended version of the Analytic Center method as a criterion for selecting cable tensions outside the WFW while maintaining differentiability and including non-linear constraints. Notably, the proposed method maintains continuous and differentiable tension profiles, ensures fast real-time convergence to a unique solution, and, in contrast to other slack-based formulations, relegates wrench errors to a negligible area of the WFW. Its superiority in terms of smoothness and wrench error is confirmed via Pareto dominance with respect to the leading state-of-the-art method. Lastly, the effectiveness of the method is demonstrated through numerical experiments.
Domenico Dona', Vincenzo Di Paola, Alberto Trevisani +1
Precise control of soft manipulators remains challenging due to the difficulty of developing accurate yet computationally tractable models for model-based estimation and control. Reduced Cosserat-rod models provide a physics-based and control-oriented description of soft-robot dynamics, offering an explicit alternative to purely data-driven input-output representations. In this paper, we propose a moving-horizon estimation (MHE) and nonlinear model predictive control (NMPC) framework for cable-driven soft manipulators based on reduced Cosserat dynamics. A smooth cable-length-driven modeling formulation is developed by approximating the complementarity relationship between cable tension and cable slackness, enabling cable-length control without direct tension sensing. Based on this formulation, an MHE method is introduced to estimate the reduced state and reconstruct the manipulator configuration from end-effector pose measurements and cable-length information. An NMPC controller is then formulated to achieve task-space control under cable-length and cable-rate constraints. The proposed framework is validated through numerical simulations and experiments. Simulation results demonstrate the effectiveness of the estimator and controller for pose and strain-related regulation on a multi-cable soft manipulator. Experimental results on a four-cable prototype further show that the proposed MHE-NMPC scheme can be implemented in real time and enables accurate end-effector position tracking through cable-length control.