Abstract
Supportive continuum robots (SCRs) enhance the load-bearing capability of an operative continuum robot by mechanically coupling it with a supportive arm. However, their passive stiffness is determined by the mechanical configuration and cannot be adjusted online for varying payloads or interaction forces. Active stiffness control is therefore needed to regulate the load response and maintain positioning accuracy. Meanwhile, the closed-chain structure introduces kinematic constraints that complicate task-space regulation and stiffness control. This paper presents an active task-space stiffness control framework for a tendon-driven SCR. An existing geometric variable strain model describes the closed-chain dynamics, which are projected onto the constraint-consistent motion subspace. A projected sliding mode controller regulates the operative arm tip while preserving the constraints, and closed-loop stability is established through Lyapunov analysis. After position regulation, active apparent stiffness is introduced through a virtual Cartesian spring based on position-error feedback to shape the force--displacement response. The framework is evaluated in simulation and experimentally validated under prescribed external loads and different desired configurations. Results show that increasing the commanded stiffness gain reduces load-induced tip deflection and increases apparent directional stiffness, thereby improving load resistance and positioning robustness under external loading.
Explore similar work
Sep 14, 2026cs.RO
Continuum robots enable smooth shape morphing and safe interaction in confined environments. However, most existing systems are task-specific and depend on external sensing infrastructure, limiting their adaptability and real-world deployment. This paper presents a self-contained modular continuum robotic platform that combines mechanical reconfigurability with onboard pose estimation. The robot is constructed from interchangeable continuum joints with analytically precomputed stiffness, allowing rapid assembly and direct programming of the robot shape. Proprioceptive sensing is achieved using magnetic sensors and a modular learning-based framework, where a single model is trained per joint and reused across configurations. The system is experimentally validated in real world, demonstrating self-sensing capabilities and adaptation without external tracking.
Guo Ning, Sue, Zheng Cao +6
Apr 28, 2026cs.RO
Tendon-Driven Continuum Robots (TDCRs) pose significant modeling and control challenges due to complex nonlinearities, such as frictional hysteresis and transmission compliance. This paper proposes a differentiable learning framework that integrates high-fidelity dynamics modeling with robust neural control. We develop a GRU-based dynamics model featuring bidirectional multi-channel connectivity and residual prediction to effectively suppress compounding errors during long-horizon auto-regressive prediction. By treating this model as a gradient bridge, an end-to-end neural control policy is optimized through backpropagation, allowing it to implicitly internalize compensation for intricate nonlinearities. Experimental validation on a physical three-section TDCR demonstrates that our framework achieves accurate tracking and superior robustness against unseen payloads, outperforming Jacobian-based methods by eliminating self-excited oscillations. For implementation details and source code, please refer to https://github.com/ZiqingZou/ContinuumControl.
Ziqing Zou, Ke Qiu, Fei Wang +3
Sep 17, 2026cs.RO
Recent factor graph approaches to continuum robot state estimation have been successful for quasi-static applications and spatiotemporal estimation using white-noise kinematic motion priors. However, when inertial effects are significant, these approximations may fail to capture the underlying physics, limiting accuracy during dynamic motions. In contrast, our approach approximates the Cosserat rod dynamics of continuum robots. We write inertia and damping as equivalent applied loads, so that the dynamic balance retains the algebraic form of the static one from prior work with quasi-static robots. Without backbone observations, the framework reduces to a stochastic forward simulation of the robot's motion. Given observations, it jointly refines kinematic and dynamic states and infers external loads, among other states. We validate the approach through simulation and experiments, demonstrating stochastic forward simulation as well as state estimation on tendon-driven continuum robots.
James M. Ferguson, Tucker Hermans, Alan Kuntz