AI Visual Inspection for Garment Production

Visual inspection remains the dominant quality-control practice in woven and tufted carpet production, yet it is slow, subjective, and inconsistent at the line speeds and widths of modern looms. We present a design proposal for an in-line machine-vision system whose primary purpose is twofold: to inspect the carpet web in real time and, equally importantly, to systematically collect and label images of defect patterns so that increasingly capable quality-control models can be trained over the life of the installation. The proposal is grounded in a concrete industrial setting: a Six Sigma (DMAIC) project at a woven-carpet production facility that anticipated a production bottleneck following the installation of additional weaving machines, with a substantial baseline defect rate and significant financial exposure associated with quality failures. We describe an imaging subsystem based on synchronized line-scan cameras with combined bright-field and grazing illumination, derive the resolution and throughput requirements needed to resolve fine structural defects across a multi-metre web, and define a carpet-specific defect taxonomy. We then lay out a staged modelling strategy that begins with unsupervised anomaly detection trained on defect-free material, following the paradigm exemplified by the carpet category of the MVTec Anomaly Detection benchmark, and matures through a human-in-the-loop annotation flywheel into supervised detection and segmentation models. Finally, we connect detection performance to the DMAIC objectives, showing how reductions in escaped defects translate into improved process quality and process sigma levels. The contribution is an end-to-end, deployable blueprint that treats data collection as a first-class engineering objective rather than an afterthought.

Automating garment assembly from sewing patterns remains a significant challenge due to the lack of standardized annotation protocols and the frequent absence of semantic cues. Existing methods often rely on panel labels or handcrafted heuristics, which limit their applicability to real-world, non-conforming patterns. We present AutoSew, a fully automatic, geometry-based approach for predicting stitch correspondences directly from 2D pattern contours. AutoSew formulates the problem as a graph matching task, leveraging a Graph Neural Network to capture local and global geometric context, and employing a differentiable optimal transport solver to infer stitching relationships-including multi-edge connections. To support this task, we update the GarmentCodeData dataset modifying over 18k patterns with realistic multi-edge annotations, reflecting industrial assembly scenarios. AutoSew achieves 96% F1-score and successfully assembles 73.3% of test garments without error, outperforming existing methods while relying solely on geometric input. Our results demonstrate that geometry alone can robustly guide stitching prediction, enabling scalable garment assembly without manual input.

In the production process of network cables, ensuring the correct color sequence of wire pairs inside the standard connector plays a critical role in the final performance of the cable, as any misplacement or color-ordering error can lead to defective products and impose significant costs. Traditional inspection methods based on visual examination through digital microscopes are typically time-consuming, tedious, and prone to human error. In this study, an intelligent system based on the twelfth version of the YOLO1 object detection model was developed to identify the position and verify the correct color sequence of wires in patch cords. The dataset used consisted of 2,500 images captured from microscopic views of network connectors, which were divided into 70% for training, 15% for validation, and 15% for testing. The proposed model, leveraging a single-stage architecture and attention mechanisms during learning, achieved highly accurate wire detection with approximately 98% precision. Additionally, the overall mean accuracy, classification precision, and recall were around 95%, 99%, and 98%, respectively. The results demonstrate that this system can reliably and in real time verify the correctness of wire color sequencing on the production line without the need for human intervention, thereby reducing human error and enhancing efficiency in the manufacturing process.