Data-Centric Neuromotor Interfaces for Portable Human-Machine Interaction

High-density electromyography (HD-EMG) has emerged as a powerful modality for decoding fine-grained neuromuscular activity, enabling real-time neural-machine interfaces (NMIs) for applications such as prosthetic control, rehabilitation, and augmented interaction. While deep learning approaches such as convolutional neural networks (CNNs)have demonstrated high classification accuracy for EMG-based gesture recognition, their deployment on embedded hardware remains a major challenge due to computational and memory constraints. This paper presents NeuroEdge, a real-time HD EMG-based NMI system that performs gesture recognition entirely on resource-constrained microcontrollers. The system features two custom-designed modules: the HD-EMG StreamBridge, a wireless communication interface that streams raw HD-EMG data from a Quattrocento amplifier to an ESP32 microcontroller; and the EdgeDL Inference Engine, a lightweight deep learning framework executing on a Sony Spresense microcontroller. A compact 1-dimensional CNN optimized for embedded inference processes, sliding windows of EMG data in real time. Data streaming and inference are pipelined and synchronized through an architecture that utilizes Direct Memory Access (DMA) for data transfer and Serial Peripheral Interface (SPI) burst communication between the ESP32 and Spresense, ensuring low-latency performance. Experimental results show that NeuroEdge achieves a real-time classification accuracy of 90% across seven hand gestures, with a total average latency of 83 ms using 192 channels of HD-EMG recorded from the forearm. Our system demonstrates the feasibility of deploying complex HD-EMG-based gesture recognition on microcontroller-based edge devices, bridging the gap between high-resolution biosignal acquisition and deep learning-based embedded inference for next-generation NMIs.

Data-driven dexterous hand manipulation requires large-scale, physically consistent demonstration data. Simulation and video-based methods suffer from sim-to-real gaps and retargeting problems, while MoCap glove-based teleoperation systems require per-operator calibration and lack portability, as the robot hand is typically fixed to a stationary arm. Portable alternatives improve mobility but lack cross-platform and cross-operator compatibility. We present DEX-Mouse, a portable, calibration-free hand-held teleoperation interface with integrated kinesthetic force feedback, built from commercial off-the-shelf components under USD 150. The operator-agnostic design requires no calibration or structural modification, enabling immediate deployment across diverse environments and platforms. The interface supports a configuration in which the target robot hand is mounted directly on the forearm of an operator, producing robot-aligned data. In a comparative user study across various dexterous manipulation tasks, operators using the proposed system achieved an 86.67% task completion rate under the attached configuration. Also, we found that the attached configuration reduced the perceived workload of the operators compared to spatially separated teleoperation setups across all compared interfaces. The complete hardware and software stack, including bill of materials, CAD models, and firmware, is open-sourced at https://dex-mouse.github.io/ to facilitate replication and adoption.

Under ubiquitous teleoperation environments with optically challenging conditions, an interface for tele-operated grasping that combines wearability with precise decoding of hand intentions (hand pose, gestures, and grasping force) is essential. Yet, existing interfaces often fall short in meeting these demands, compromising either the diversity of multiple intentions decoding or wearability. To address this, we developed a novel Multiple Intentions Decoding Human-Machine Interface (MI-DHMI) that integrates high-throughput surface electromyography (sEMG) sensors with hand-mounted and forearm-mounted inertial measurement units (IMUs). The developed interface is supported by a unified framework for simultaneous multiple intentions decoding. By employing multimodal deep learning and hardware design with a low noise floor, the decoding framework selectively focuses on the sEMG components that are genuinely associated with finger movements. This effectively reduces decoding errors caused by sEMG variability during unconstrained upper-limb motions, thereby significantly enhancing robustness. Even under unconstrained wrist and forearm motion, the interface achieves a gesture recognition accuracy exceeding 97%, grasping force estimation with $R^2 = 0.95$, and hand pose decoding consistent with the actual hand pose, outperforming baseline devices and algorithms. Ablation studies further validate the effectiveness of the proposed decoding framework. Finally, two online experiments were conducted to validate the device, demonstrating its superior performance in high-stability tasks, including a pouring task and object grasping. The developed interface provides a new solution of a fully wearable, multiple intentions decoding system, offering effective support for ubiquitous teleoperation and contributing to the advancement of human-machine interaction research.