Organizations: South China University of Technology · South China Normal University · Information Research Institute, CAS · Aerospace · Nankai University
UAVs have emerged as highly flexible platforms for data sensing in Wireless Sensor Networks (WSNs). Path planning for UAVs in such tasks plays a key role to assure remote sensing effectiveness and friendly energy consumption. However, existing approaches show two key limitations: i) they are primarily hand-crafted with certain design biases that harm adaptation on unseen tasks. ii) they predominantly assume idealized spatial complexities of actual environments through simplified simulation, causing them to underperform during real-world deployment. In this paper, we propose a novel learning-assisted planning framework, termed Landscape-Aware Meta Differential Evolution (LAMDE), to tackle the mentioned limitations. The major contributions come from the following aspects. We first re-formulate such UAV path planning problem to embrace challenging constraints. To efficiently navigate this highly constrained space, we propose a bi-level learning to optimize approach, where the meta-level is a trainable algorithm configuration policy that meta-learns an adaptable planning strategy for low-level planning algorithm. To address the potential training data scarcity and distribution shift in real-world environments, we introduce a landscape-aware automatic augmentation scheme that enriches training data. At the low-level, a Differential Evolution algorithm is deployed for solving the path planning tasks. To enhance the solving flexibility, we further design a variable-length encoding strategy that dynamically prunes redundant hover points and optimizes continuous flight parameters concurrently within a unified search space. Based on all proposed designs, we meta-train LAMDE and compare it with representative baselines. Comprehensive experiments demonstrate that LAMDE achieves state-of-the-art performance on the tested complex UAV path planning tasks in WSN data collection scenarios.
Using Unmanned Aerial Vehicle (UAV) for urban sensing has emerged as a powerful paradigm to monitor the status of the city, e.g., air quality and noise levels, through agile aerial crowdsourcing. Despite this potential, existing UAV-based sensing approaches overlook environmental disturbances like wind that drastically impact drone velocity and energy efficiency. Consequently, directly applying existing methods to this joint delivery and sensing paradigm in dynamic environments faces two severe challenges: (1) scalability bottlenecks as fleet sizes expand; and (2) multi-timescale decision heterogeneity between macro task dispatching and micro velocity control. To tackle these, we formalize the problem as SensUAV and propose a Two TimeScale Reinforcement Learning framework (TSRL). Specifically, TSRL separates decision-making into two cooperative layers. At the macro level, a task-embedding sensing dispatcher handles scalability by separately encoding distinct task features and sequentially evaluating UAV suitability before task selection. At the micro level, a wind-aware velocity controller learns fine-grained velocity scheduling to adapt to dynamic environmental variations. Extensive experiments on real-world datasets demonstrate that TSRL significantly outperforms baselines, achieving average system profit improvements of 20.1% in Hangzhou and 46.6% in Shanghai.
Uncrewed aerial vehicles (UAVs) are increasingly used for exploration-driven monitoring in hazardous environments such as disaster zones, contaminated sites, wildfire areas, and damaged infrastructure, where limited flight endurance must be allocated between visiting reported locations and gathering new information. In these settings, prior information regarding hazards is often incomplete, spatially imprecise, and subject to change during execution. For example, initial reports may identify a region where a hazard is likely to exist, but the actual hazard may be displaced, partially observed, or entirely unreported. We present an integrated exploration-aware UAV route optimization and path planning framework for hazard monitoring under uncertain and evolving prior information. The environment is represented as a spatial risk map, where each location has an associated belief of hazardous conditions. Reported hazards are modeled as uncertain regions of interest (ROIs) rather than confirmed target locations, requiring the UAV to inspect reported areas while also using its limited flight endurance to explore informative regions. The proposed method solves a vehicle routing problem over reported ROIs, augments the route with auxiliary pseudo-nodes to improve spatial coverage, allocates the remaining flight distance budget across route segments, and optimizes dynamically feasible B-spline trajectories for local exploration. During execution, UAV measurements update a grid-based belief map, and the remaining trajectory is replanned when new information and the remaining budget justify adaptation. Across 48 scenario configurations, online replanning improves average KL reduction by 15.9% over the offline optimized planner and 48.6% over straight-line traversal.
Traditional autonomous UAV search missions rely on geometric coverage patterns that ignore the semantic context of the target, leading to significant time waste in large-scale environments. In this paper we present LMPath, a pipeline for generating language-mediated exploration priors for Unmanned Aerial Vehicle (UAV) search missions that leverages semantics. Given a basic geofence and an object of interest prompt, LMPath uses generative language models to determine what regions of the environment should contain that object and a foundation vision model ran over satellite imagery to segment sub-regions that form the exploration prior. This prior can then be used to generate UAV paths with various objectives, such as minimizing the expected time to locate the object of interest, maximizing the probability that the object is found given a limited travel distance, or narrowing down the search space to sub-regions that are most likely to contain the object. To demonstrate it's capabilities, we used LMPath to generate various UAV paths and ran them using a real UAV over large-scale environments. We also ran simulations to demonstrate how paths generated using LMPath outperform traditional path planning approaches for search missions.
Jonathan A. Diller, Fernando Cladera, Camillo J. Taylor +1