Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.
WiFi Channel State Information (CSI) enables privacy-preserving human pose sensing in camera-denied environments, but existing WiFi-based pose estimators often fail under environment shifts and rely on costly camera-based annotation pipelines that limit scale. We propose WiFi-JEPA, a self-supervised framework that learns CSI-native representations by predicting masked latent embeddings instead of reconstructing raw CSI signals that may contain hardware-specific artifacts. WiFi-JEPA makes three contributions: (i) CSI-specific tokenization and link masking tailored to the CSI tensor over channel, time, and link (C,T,L); masking entire Tx-Rx antenna links forces the model to predict one spatial link view from others, capturing cross-link correlations informative of 3D spatial structure. (ii) A ray-tracing CSI simulation pipeline that generates diverse unlabeled CSI from randomized geometric primitives, providing scalable pre-training data without pose annotations. (iii) State-of-the-art results on Person-in-WiFi-3D: WiFi-JEPA outperforms prior WiFi-CSI baselines on both single- and multi-person 3D pose estimation under the same evaluation protocol. We also show that simulated CSI provides complementary pre-training signal to real CSI, and that four vision-native SSL objectives degrade performance below training from scratch, whereas WiFi-JEPA consistently improves downstream pose estimation.
Ubiquitous perception through RF signals is a pivotal opportunity for future technology: it enables personalized services such as smart living, remote healthcare, automated logistics or interaction through free-space gestures. The ubiquity of Wi-Fi and cellular networks presents a promising platform for the development of innovative sensing tools. Future standards will also introduce dedicated sensing features which, for example, will allow routers to work as frequency modulated continuous wave radios targeting radar applications. Most of the current chip designs support ad-hoc firmware for CSI extraction with MIMO arrangements of the transmitter (TX) and receiver (RX) antennas and OFDM subcarriers. The CSI describes the phase shift and amplitude attenuation of multiple propagation paths on each subcarrier. The latest IEEE 802.11be standard (Wi-Fi 7) offers a wider subcarrier bandwidth of 160MHz (up to 320MHz), providing at least 120 usable pilot subcarriers for CSI or CIR estimation. Additionally, Wi-Fi signals have been recently exploited to track daily human movements and behaviors, while Wi-Fi signal variations have been shown to differ between different people and can consequently be used for their re-identification.
Device-free 3D human pose estimation using commodity WiFi Channel State Information (CSI) enables privacy-preserving and illumination-robust human sensing, but its deployment is limited by poor cross-environment generalization. Unlike images, CSI measurements do not have a spatially localized correspondence to body parts and are heavily affected by multipath propagation, causing models that regress absolute poses to entangle body structure with environment-specific location cues. Within a single environment this coupling is benign: an end-to-end absolute-pose variant, RePos-D, already achieves state-of-the-art accuracy on Person-in-WiFi-3D (86.9 mm MPJPE, a 3.4% gain over the previous best WiFi method, DT-Pose). Across environments, however, the same model overfits position and suffers significant performance degradation. We therefore propose RePos, a factorized framework that separates root-relative pose estimation from root localization. By preventing absolute-pose supervision from affecting the structure branch, RePos learns environment-invariant pose representations. Specifically, it groups CSI features into body-part-aware latent tokens that skeleton-guided modeling refines into the pose, while a separate amplitude-based network estimates the root position through a differentiable spatial-decomposition module. Under the strict MM-Fi cross-environment protocol, RePos achieves MPJPEs of 254.4-296.1 mm, a 10-21% reduction over existing WiFi-based methods. The improvement remains consistent across activity protocols, leave-one-environment-out splits, and leakage-free few-shot transfer. Analysis of the learned features shows that relative-pose representations remain largely position-agnostic, while root localization retains environment dependence, indicating distinct generalization behavior for structure and localization.