This paper investigates multi-material 3D printing as a method to fabricate non-planar structures with 3D-printed electrode patterns for electroadhesion. We printed flat electroadhesion pads as a planar benchmark and cylindrical pads as a non-planar demonstration, with conductive interdigitated electrodes 3D printed as part of the structure. Normal-force measurements showed voltage-controlled modulation in both geometries. At 3 kV, the flat pads generated approximately 0.11-0.13 N, while the cylindrical pads reached approximately 0.16 N at 5 N preload. These results demonstrate a step toward printed parts with built-in, electrically controlled adhesion and friction, beyond conventional planar electroadhesion pads.
3D-printed artificial skins are a scalable approach to whole-body tactile and proximity coverage, but prior implementations have been limited to unimodal sensing and rigid materials. To improve the practical usability of 3D-printed artificial skins, we present a hybrid time-of-flight (ToF) and self-capacitance (SC) sensing skin that demonstrates multi-modal sensing integration, soft compliant coverings for impact absorption and pressure sensing, and a streamlined electrical interface between printed conductive traces and external electronics. We show that combining ToF and SC modalities enables contact detection, scene reconstruction, and pressure-correlated tactile responses with the compliant covering by deploying six artificial skin units with 40 sensing elements over an FR3 robot arm.
We introduce an elastic-driven self-folding approach that fabricates robots directly from flat 3D-printed conductive PLA nets. Elastic bands routed through printed hooks store energy that folds the sheet into programmed 3D geometries, while the flat state allows accurate placement of electronics and magnets before deployment. The same substrate doubles as electrodes for capacitive touch and supports a reusable platform I/O palette with Hall sensors and eccentric rotating mass (ERM) motors for docking detection and vibration actuation. We also derive a closed-form folding model that balances hinge stiffness with elastic band moment to predict equilibrium fold angles; experiments validate the model and yield a design map linking hinge thickness, band size, and hook spacing to target angles. Using this workflow we realize multiple polyhedral modules and demonstrate three applications: a cube that highlights the potential of self-folding for scalable modular robot collectives, a deployable gripper, and a tendon-driven finger. The method is low cost, stimulus-free, and integrates actuation and sensing.
Realistic palpation training requires reliable rendering of soft tissue stiffness changes in real time, which is difficult to achieve with conventional simulators. This paper presents a compact, variable-stiffness tactile interface (VSTaI) based on vacuum-induced jamming of 3D-printed structured fabrics. A vacuum-sealed fabric layer is sandwiched between two silicone layers, and stiffness is tuned by regulating internal pressure. Four fabric patterns with different geometric parameters were fabricated and evaluated using force-indentation tests under atmospheric and vacuum conditions. Across the tested pattern and geometry combinations, vacuum jamming increased stiffness significantly, producing an effective modulus from sub-megapascal to megapascal levels. Specifically, one configuration exhibited a stiffness increase of up to 140% under the jammed state. Circular chainmail patterns provided the most spatially uniform distribution of tactile stiffness, while denser geometries reached higher peak stiffness. VSTaI was also shown to exhibit excellent conformability to the underlying geometry. These results support structured-fabric jamming as a practical approach for shape-conformable, tunable-stiffness displays aimed at physical examination training.