Beyond Depth Truncation: Controlled Evaluation of Depth Utilization in Recursive Language Models

We measure how much one recurrence is worth to a looped (depth-recurrent) transformer, in equivalent unique parameters. From an iso-depth pretraining sweep across recurrence counts $r \in \{1, 2, 4, 8\}$ spanning ${\sim}50\times$ in training compute, we fit a joint scaling law $L = E + A\,(N_\text{once} + r^{\varphi} N_\text{rec})^{-α} + B\,D^{-β}$ and measure a recurrence-equivalence exponent $\varphi = 0.46$. Intuitively, $\varphi$ tells us whether looping a block $r$ times is equivalent in validation loss to $r$ unique blocks of a non-looped model (full equivalence, $\varphi{=}1$) or to a single block run repeatedly with no capacity gain ($\varphi{=}0$). Our $\varphi = 0.46$ sits in between, so replacing unique blocks with shared recurrences increases validation loss at matched training compute. For example, at $r{=}4$ a 410M looped model performs on par with a 580M non-looped model, but incurs the training cost of a 1B non-looped one. We demonstrate the utility of $\varphi$ as a diagnostic tool on two case studies: commonly used truncated backpropagation lowers $\varphi$ to $0.38$, indicating that the loop mechanism is poorly trained under truncation, even though validation loss decreases. Conversely, hyperconnections raise $\varphi$ to $0.65$, a genuine capacity gain. Our method separates true loop improvements from training-side gains, a distinction raw validation loss cannot make.

A dense, pretrained language model can be retrofitted with recurrent depth and learn an iterative latent transition that persists after outcome-only annealing. Qwen2.5-0.5B-Instruct is split into a Prelude, a weight-tied Recurrent Block, and a Coda, with an identity-preserving one-loop path and a re-entry bridge on later loops. At loop 1 the retrofit remains non-inferior to its base on a preregistered ARC battery. Three findings. First, the mechanism is a reusable procedure rather than terminal-answer lookup, and installs at two budgets: 6M trained parameters over frozen base weights and 180M full-block. With intermediate-step supervision, the model computes one task step per loop and persists when only final answers are graded. The adapter matched the full block overall (83.8% versus 84.0%), led through depth 11, and trailed beyond. Verbal fine-tuning reached 79-86% on controlled verbal renderings (zero-shot transfer was minimal), and adapter verbal training begun from the installed mechanism outpaced matched fresh training by 18.6 points, including on a held-out test set. Second, the operation extrapolates to roughly 1.5 times its supervised depth, holding 70% accuracy through depth 18. Third, a same-size scratchpad-trained model matched the recurrent model within its learned horizon but collapsed beyond it. The recurrent model won overall, 84% versus 72%, retained 53% versus 2.5% beyond depth 10, and answered 7.6 times faster. An iterative transformer can therefore perform deeper reasoning in latent space faster than comparable or larger models fine-tuned on the same task, in a system-level comparison. A second task, running the rule in reverse, exposed the limits: the inverse was learnable in isolation, but no continuation acquired it while preserving the installed mechanism and general capability, a catastrophic-interference boundary. Learned depth selection remains open.

Modern language models, including transformer, recurrent, and memory-based variants, share a common chassis: a stack of identical layers in which parameters are allocated uniformly across depth. This is a default inherited from the original transformer and largely unchanged since, yet a growing body of evidence suggests that layers contribute non-uniformly to the final output, with later layers refining the residual stream rather than transforming it. We ask whether parameter capacity should reflect this asymmetry. Our controlled experiment shows that, under a fixed budget, allocating more capacity to earlier layers and less to later layers improves perplexity over a uniform-width baseline, while the reverse allocation hurts. Building on this result, we introduce Tapered Language Models (TLMs), an architectural principle in which a parameter-bearing component is monotonically tapered across depth under a fixed total budget. MLPs are the natural site for this instantiation: they dominate parameter count across all modern LM families and expose width as a single, clean axis of variation. Across three model scales and four architectures (Transformer, Gated Attention, Hope-attention, and Titans), tapering MLP width via a smooth cosine schedule consistently improves perplexity and downstream benchmark performance over uniform baselines, at no additional parameter or compute cost. These findings establish depth-aware capacity allocation as a simple, architecture-agnostic axis of language model design, a free lever hidden in plain sight.