MOLA LiDAR-Inertial Odometry (MOLA-LIO) on the COMFORT Localization Benchmark

This paper introduces 2Fast-2Lamaa, a lidar-inertial state estimation framework for odometry, mapping, and localization. Its first key component is the optimization-based undistortion of lidar scans, which uses continuous IMU preintegration to model the system's pose at every lidar point timestamp. The continuous trajectory over 100-200ms is parameterized only by the initial scan conditions (linear velocity and gravity orientation) and IMU biases, yielding eleven state variables. These are estimated by minimizing point-to-line and point-to-plane distances between lidar-extracted features without relying on previous estimates, resulting in a prior-less motion-distortion correction strategy. Because the method performs local state estimation, it directly provides scan-to-scan odometry. To maintain geometric consistency over longer periods, undistorted scans are used for scan-to-map registration. The map representation employs Gaussian Processes to form a continuous distance field, enabling point-to-surface distance queries anywhere in space. Poses of the undistorted scans are refined by minimizing these distances through non-linear least-squares optimization. For odometry and mapping, the map is built incrementally in real time; for pure localization, existing maps are reused. The incremental map construction also includes mechanisms for removing dynamic objects. We benchmark 2Fast-2Lamaa on over 750km of public and self-collected datasets from both automotive and handheld systems. The framework achieves state-of-the-art performance across diverse and challenging scenarios, reaching odometry and localization errors as low as 0.22% and 0.06 m, respectively. The real-time implementation is publicly available at https://github.com/clegenti/2fast2lamaa.

LiDAR Inertial Odometry (LIO) is a critical component for many mobile robots that need to navigate without relying on external positioning (e.g., GPS). Platforms that operate autonomously in different environments and with heterogeneous LiDAR sensors require a LIO approach that can adapt to these different scenarios without human intervention. Existing LIO approaches can typically provide reliable and accurate odometry in scenarios with similar environments and sensors when suitably tuned. However, many approaches struggle to retain robust odometry across heterogeneous environments and sensors while using a consistent configuration. This paper presents EllipseLIO, a real-time LIO approach that generalises between scenarios by using methods for LiDAR scan filtering and registration that adapt to the sensor capabilities and environment without requiring scenario-specific tuning. Experiments with EllipseLIO and state-of-the-art LIO approaches on five datasets with diverse and challenging scenarios demonstrate that EllipseLIO is the best-performing approach overall. It achieves a 38% lower odometry error on average than the second-best approach and is the only approach that does not diverge in any experiment. An open-source version of EllipseLIO will be available at github.com/v4rl-ucy/ellipselio.

Open-source LiDAR-inertial odometry (LIO) systems have achieved remarkable benchmark accuracy, yet current state-of-the-art implementations are primarily optimized for evaluation performance rather than the requirements of real-time closed-loop aerial control. When deployed onboard UAVs, this can introduce limitations that degrade flight performance. In this work, we identify five architectural deficiencies in a representative tightly coupled IESKF-based LIO implementation: odometry publishing tied to the LiDAR rate (10 Hz instead of the IMU's 200 Hz), missing velocity outputs, execution bottlenecks that block IMU processing, mutex contention, and synchronization race conditions. We introduce corresponding modifications including IMU-rate forward propagation, direct body-frame velocity publishing, SLERP-based smoothing, dual-executor isolation, and explicit synchronization protection. The resulting system increases odometry output from ~10 Hz to a stable 200 Hz, provides a complete Twist state at every IMU sample, and preserves continuity during transient LiDAR loss. Experiments on a Livox Mid-360 / Pixhawk 4 Mini autonomous UAV with motion-capture ground truth validate the approach. Since the underlying estimator (IESKF + ikd-Tree) remains unchanged, the proposed improvements can be directly applied to FAST-LIO2-derived implementations.